2011-10-04, 17:32
hi there. I tried to fix my double command problem with building these new modules.
My hardware.conf looks like:
it works so far but a few commands are recognized by 4 times.
i increased the signal time in my harmony one configuration else some keys were not recognized.
The build of the new modules worked but lirc does not work any more then. I have to purge
lirc-modules-source & lirc and reinstall again to get it working again.
Any ideas how to fix that?
My hardware.conf looks like:
Quote:# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Soundgraph iMON Antec Veris"
REMOTE_MODULES="lirc_dev lirc_imon"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF="imon/lircd.conf.imon-antec-veris"
REMOTE_LIRCD_ARGS=""
#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""
#Enable lircd
START_LIRCD="true"
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
LOAD_MODULES="true"
# Default configuration files for your hardware if any
LIRCMD_CONF=""
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""
it works so far but a few commands are recognized by 4 times.
Quote:root@htpc:/home/xbmc# irw
0100800000000201 00 KEY_UP Antec_Veris_RM200
01007f0000000201 00 KEY_DOWN Antec_Veris_RM200
0100007f00000201 00 KEY_RIGHT Antec_Veris_RM200
0100008000000201 00 KEY_LEFT Antec_Veris_RM200
0200006500000201 00 RightMenu Antec_Veris_RM200
0200006500000201 01 RightMenu Antec_Veris_RM200
0200006500000201 02 RightMenu Antec_Veris_RM200
0200006500000201 03 RightMenu Antec_Veris_RM200
29a595b700000201 00 Zoom Antec_Veris_RM200
29a595b700000201 01 Zoom Antec_Veris_RM200
29a595b700000201 02 Zoom Antec_Veris_RM200
29a595b700000201 03 Zoom Antec_Veris_RM200
2ab715b700000201 00 Thumbnail Antec_Veris_RM200
2ab715b700000201 01 Thumbnail Antec_Veris_RM200
2ab715b700000201 02 Thumbnail Antec_Veris_RM200
2ab715b700000201 03 Thumbnail Antec_Veris_RM200
289395b700000201 00 KEY_CHANNELUP Antec_Veris_RM200
289395b700000201 01 KEY_CHANNELUP Antec_Veris_RM200
289395b700000201 02 KEY_CHANNELUP Antec_Veris_RM200
289395b700000201 03 KEY_CHANNELUP Antec_Veris_RM200
0200002c00000201 00 KEY_SELECT Antec_Veris_RM200
0200002c00000201 01 KEY_SELECT Antec_Veris_RM200
0200002c00000201 02 KEY_SELECT Antec_Veris_RM200
01007f0000000201 00 KEY_DOWN Antec_Veris_RM200
0100007f00000201 00 KEY_RIGHT Antec_Veris_RM200
01007f0000000201 00 KEY_DOWN Antec_Veris_RM200
i increased the signal time in my harmony one configuration else some keys were not recognized.
The build of the new modules worked but lirc does not work any more then. I have to purge
lirc-modules-source & lirc and reinstall again to get it working again.
Any ideas how to fix that?