2011-02-01, 18:21
Hi all!
I'm struggling with my remote. I did an upgrade to the latest Dharma image but my old Xbox remote (the black/green one) doesn't work with it. So i'm sticking to my 9.11 based version. I've got my remote setup and it works fairly ok.
My troubles are these:
The Back button which normally goes back a dir doesn't work anymore. So i must use the 3 dots (...) to go up a dir.
Second issue: I had a shortcut to a .pls file in my music share that was activated when i press 0. This doesn't do anything either.
Third issue: Even though i press and hold a button on the remote, xbmc only gives 1 command. Browsing is very difficult because of this.
Here are my hardware.conf, lird.conf files:
I'm struggling with my remote. I did an upgrade to the latest Dharma image but my old Xbox remote (the black/green one) doesn't work with it. So i'm sticking to my 9.11 based version. I've got my remote setup and it works fairly ok.
My troubles are these:
The Back button which normally goes back a dir doesn't work anymore. So i must use the 3 dots (...) to go up a dir.
Second issue: I had a shortcut to a .pls file in my music share that was activated when i press 0. This doesn't do anything either.
Third issue: Even though i press and hold a button on the remote, xbmc only gives 1 command. Browsing is very difficult because of this.
Here are my hardware.conf, lird.conf files:
Code:
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="None"
REMOTE_MODULES="lirc_atiusb lirc_dev"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS="-r"
#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""
#Enable lircd
START_LIRCD="true"
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
LOAD_MODULES="true"
# Default configuration files for your hardware if any
LIRCMD_CONF="lircd.conf"
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="true"
START_LIRCMD=""
Code:
#
# LIRCD configuration file for Xbox DVD Kit
#
# Marko Friedemann <mfr|bmx-chemnitz.de>
#
#
# brand: Microsoft
# model: Xbox DVD Remote
# supported devices: Xbox DVD Remote via xpad-ir driver
#
# comment: EXPERIMENTAL
#
begin remote
name XboxDVDDongle
bits 8
begin codes
SELECT 0x0b
UP 0xa6
DOWN 0xa7
RIGHT 0xa8
LEFT 0xa9
INFO 0xc3
9 0xc6
8 0xc7
7 0xc8
6 0xc9
5 0xca
4 0xcb
3 0xcc
2 0xcd
1 0xce
0 0xcf
DISPLAY 0xd5
BACK 0xd8
SKIP- 0xdd
SKIP+ 0xdf
STOP 0xe0
REVERSE 0xe2
FORWARD 0xe3
TITLE 0xe5
PAUSE 0xe6
PLAY 0xea
MENU 0xf7
end codes
end remote