2011-12-04, 02:08
cbxbiker61 Wrote:It should look more like this: (note the receiver name is specified, and the supported pass-through formats are listed).
My wiring is: hdmi cable from computer to receiver and then hdmi cable from receiver to tv. Did you connect it like that? I can't remember if there's a configuration option in the receiver configuration to allow pass-through, that could also be the problem.
I have the same wiring, well except I have a projector at the other end of the receiver.
I restarted the computer with a newer kernel, 3.1.4 and now it gave me some more info but not nearly as much as you have. I've tried the different "adjust picture" settings for HDMI but they don't change the info in eld. I use "direct" mode as I don't want the receiver to do anything with the picture.
Code:
monitor_present 1
eld_valid 1
monitor_name
connection_type HDMI
eld_version [0x2] CEA-861D or below
edid_version [0x3] CEA-861-B, C or D
manufacture_id 0x0
product_id 0x0
port_id 0x0
support_hdcp 1
support_ai 0
audio_sync_delay 0
speakers [0x1] FL/FR
sad_count 1
sad0_coding_type [0x1] LPCM
sad0_channels 2
sad0_rates [0xe0] 44100 48000 88200
sad0_bits [0x20000] 16