2011-12-04, 12:24
jawilljr Wrote:Forsaken, On your Onkyo receiver, make sure that the "Audio TV Out" is set to "OFF". I got that from pages 58 and 59 of the Reciever's manual.
I would probably set RIHD a "Audio Return Channel" to off also.
Also here is an excellent thread for your receiver. I would also ask there on what the proper HDMI Audio settings should be.
Of-course when you change audio settings in the receiver you should reboot XBMC so the NVIDIA drivers could re-read the EDID from your receiver.
Hope the info helps... and good luck.
Jerry
Yes they are off, I'll see if I can find something else.
cbxbiker, ok I'm going to play around with the settings on the receiver and see if I can't get it to work.