2011-03-19, 00:25
Hi,
I'm trying to get this X10 working with XBMC:
I found a lot of TUT's to get X10 working. And it is really working!!
EXCEPT: The wheel for UP and DOWN!!
There is no function!
When I use irw to see the hexcodes, the up and down is given NO code!!
So I don't know what to do. Sry, I'm really a noob. I use XBMC for 6 days on my ZOTAC ZBOX with installed XBMC LIVE.
Here is my lircd.conf:
Really need to help because without UP/DOWN function, XBMC is not very nice
Greetz
Pikeman
I'm trying to get this X10 working with XBMC:
I found a lot of TUT's to get X10 working. And it is really working!!
EXCEPT: The wheel for UP and DOWN!!
There is no function!
When I use irw to see the hexcodes, the up and down is given NO code!!
So I don't know what to do. Sry, I'm really a noob. I use XBMC for 6 days on my ZOTAC ZBOX with installed XBMC LIVE.
Here is my lircd.conf:
Code:
# Please make this file available to others
# by sending it to <[email protected]>
#
# this config file was automatically generated
# using lirc-0.8.4a(atilibusb) on Tue Sep 8 23:54:34 2009
#
# contributed by funnybox2006, modified by nebu
#
# brand: X10
# model no. of remote control: OR22V with RF USB Dongle
# devices being controlled by this remote:
# note: use atilibusb driver for this remote and set device in hardware.conf to /dev$
begin remote
name mceusb
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 139982
min_repeat 2
toggle_bit_mask 0x80800000
begin codes
Power 0xD702
Red 0x87B2
Yellow 0x0934
Green 0x88B3
Teletext 0x6B96
Blue 0x0A35
Back 0xF520
More 0x84AF
Up 0xEF1A
Left 0x729D
OK 0xF31E
Right 0xF41F
Down 0x77A2
KEY_TIMESHIFTING 0x6D98
Guide 0x0631
DVD 0xD904
LiveTV 0x719C
VolUp 0xDE09
Home 0x709B
ChanUp 0xE00B
VolDown 0x5D88
ChanUp 0x618C
Mute 0xD500
Replay 0x76A1
Skip 0xF823
Rewind 0x79A4
Play 0xFA25
Forward 0x7BA6
Record 0xFC27
Stop 0x7DA8
Pause 0xFE29
One 0x628D
Two 0xE30E
Three 0x648F
Four 0xE510
Five 0x6691
Six 0xE712
Seven 0x6893
Eight 0xE914
Nine 0x6A95
Star 0x8CB7
Zero 0xEC17
Hash 0x0D38
Clear 0x85B0
Enter 0x0B36
end codes
end remote
Really need to help because without UP/DOWN function, XBMC is not very nice
Greetz
Pikeman