2012-04-18, 23:30
If you want to know what audio is included in your blu-ray disc movie, you can verify it on this site- Blu-ray Disc Statistics
or
MediaInfo
or
MediaInfo
(2012-04-18, 23:21)steelman1991 Wrote:(2012-04-18, 22:31)Phantom_Zone Wrote:Check that your windows sound settings are set to 5.1 (or whatever config you have) Its the only way I could effectively playback lpcm and flac tracks as they cannot be bitstreamed AFAIK, but require decoding before being passed to the receiver as LPCM. No doubt DanielaE or DDDamien will confirm/correct this info in due course.(2012-04-18, 21:53)OtisPresley Wrote: This would indicate a problem with LPCM then. All of the Pirates of the Caribbean movies have LPCM audio tracks on the Blu-Ray release...mine all do anyway, and my receiver indicates MULTI CHANNEL when playing them meaning that it detected LPCM. Kill Bill, 300, Hidalgo, and 3:10 to Yuma have LPCM tracks as well if you have any of those to try and see if they exhibit the same behavior.
If your receiver supports DTS-MA and LPCM, make sure under Settings>>System>>Audio output, that you have:
- receiver supports: DTS-HD Master Audio
- receiver gets other DTS formats: decoded(LPCM)
Ah ok...Kill Bill Part 1 plays stereo, 300 Dolby True HD, Hidalgo I don't have and yes, 3:10 to Yuma plays stereo...
My settings are right and my amp does support LPCM! (Pioneer SC-LX85)
Anyone else having this issue? (or am I dimly missing something!)
Great work you two by the way
(2012-04-18, 23:21)steelman1991 Wrote: Check that your windows sound settings are set to 5.1 (or whatever config you have) Its the only way I could effectively playback lpcm and flac tracks as they cannot be bitstreamed AFAIK, but require decoding before being passed to the receiver as LPCMconfirmed
(2012-04-18, 22:03)serieofilo Wrote: I'm using RC2 version with the HD patchRC2 is obsolete btw. The most recent build is post-Eden.
serieofilo Wrote:- Support DTS-HD Master Audio (is this the best sound my receiver accepts, isn'it?)Yes, and yes
- Other DTS as decoded (LPCM) (I suppose it doesn't matter because of the other setting)
(2012-04-18, 19:25)DanielaE Wrote: I'm not exactly a fan of log files when we can do better than that. I'm always getting the impression this is a bad sequel of the movie The Men Who Stare at Goats: The Coders Who Stare at Logs, that is.
As before: make snippets of these media files available to me (after checking that those snippets exhibit the same faulty behaviour on your system as the full files) and I am going to look into that. I need to reproduce issues on my development system under control of the debugger to get a better understanding of what's going on. It's as easy as that.
(2012-04-19, 14:30)m0bbed Wrote: is the "XBMCSetup-11.0+HD-audio Windows installer" based on the final Version of XBMC 11.0 Eden?
(2012-04-17, 19:48)DanielaE Wrote: cut off the very latest Eden branch (mostly translation changes on top of official Eden)i.e.
(2012-04-19, 07:28)DanielaE Wrote:(2012-04-18, 22:03)serieofilo Wrote: I'm using RC2 version with the HD patchRC2 is obsolete btw. The most recent build is post-Eden.
serieofilo Wrote:- Support DTS-HD Master Audio (is this the best sound my receiver accepts, isn'it?)Yes, and yes
- Other DTS as decoded (LPCM) (I suppose it doesn't matter because of the other setting)
General
Format : MPEG-4
Format profile : Base Media
Codec ID : isom
File size : 1.37 GiB
Duration : 2h 12mn
Overall bit rate : 1 478 Kbps
Writing application : Lavf54.1.100
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 2h 12mn
Bit rate : 1 217 Kbps
Width : 1 280 pixels
Height : 536 pixels
Display aspect ratio : 2.40:1
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.074
Stream size : 1.13 GiB (82%)
Writing library : x264 core 120 r2164
Encoding settings : cabac=1 / ref=2 / deblock=1:0:0 / analyse=0x1:0x131 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=230 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=2pass / mbtree=1 / bitrate=1217 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=24000 / vbv_bufsize=24000 / nal_hrd=none / ip_ratio=1.40 / aq=1:1.00
Language : English
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 2h 12mn
Bit rate mode : Constant
Bit rate : 256 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 243 MiB (17%)
Language : English
Menu
00:00:00.000 : 00:00:00.000 / 00:00:00.000
00:04:41.907 : 00:04:41.907 / 00:04:41.907
00:11:28.897 : 00:11:28.897 / 00:11:28.897
00:20:01.951 : 00:20:01.951 / 00:20:01.951
00:27:35.320 : 00:27:35.320 / 00:27:35.320
00:33:28.173 : 00:33:28.173 / 00:33:28.173
00:38:18.087 : 00:38:18.087 / 00:38:18.087
00:44:46.100 : 00:44:46.100 / 00:44:46.100
00:51:37.219 : 00:51:37.219 / 00:51:37.219
00:56:05.153 : 00:56:05.153 / 00:56:05.153
01:02:50.183 : 01:02:50.183 / 01:02:50.183
01:09:17.820 : 01:09:17.820 / 01:09:17.820
01:16:32.379 : 01:16:32.379 / 01:16:32.379
01:22:18.517 : 01:22:18.517 / 01:22:18.517
01:31:17.055 : 01:31:17.055 / 01:31:17.055
01:35:57.377 : 01:35:57.377 / 01:35:57.377
01:42:49.914 : 01:42:49.914 / 01:42:49.914
01:51:01.780 : 01:51:01.780 / 01:51:01.780
01:58:26.391 : 01:58:26.391 / 01:58:26.391
02:05:58.843 : 02:05:58.843 / 02:05:58.843
(2012-04-22, 01:05)serieofilo Wrote: Hi,Your HTPC might need this- The Microsoft Visual C++ 2010 Redistributable Package
I'm using latest version of DanielaE (the build from April 17th) and I get the following error message:
Microsoft Visual C++ Runtime Library
Program: D:\SOFT\XBMC\XBMC.exe
File: libavformat/utils.c
Line: 2195
Expression: s->chapters[i]->start<=s->chapters[i+1]->start
Thanks.