2012-05-14, 03:30
(2012-05-14, 02:12)Beer40oz Wrote: He don't need to he has the same temps as when he had the CAGE......But that is not two silent Silenx or Noctua fans......
(2012-05-14, 02:12)Beer40oz Wrote: He don't need to he has the same temps as when he had the CAGE......But that is not two silent Silenx or Noctua fans......
(2012-05-14, 03:30)bluray Wrote:(2012-05-14, 02:12)Beer40oz Wrote: He don't need to he has the same temps as when he had the CAGE......But that is not two silent Silenx or Noctua fans......
(2012-05-13, 23:49)MrKay Wrote: I just don't know why my cpu fan speed is so high after seeing your screen shot. In my bios in advanced\CPU Configuration
Core C6 Mode - Enabled
Cstate Pmin Mode - Disabled
Cool 'n' Quiet - Enabled
SVM - Enabled
CPU Thermal Throttle - Auto
CPU Fan 1 & 2 Setting - Automatic mode
Target CPU Temperature 50/122
Target Fan Speed Level 1
Is that the same as your's beer. So far my bootup time is 27 seconds to login in screen and after loged in it's 33 seconds haven't done the eskro optimize ssd yet will do that after my new picopsu comes and hopefully works
(2012-05-14, 04:28)Beer40oz Wrote:Well he said his temp and noise are a little high......with the silent Silenx or Noctua fans, it might help lower the temp/noise in his A8 box.....(2012-05-14, 03:30)bluray Wrote:(2012-05-14, 02:12)Beer40oz Wrote: He don't need to he has the same temps as when he had the CAGE......But that is not two silent Silenx or Noctua fans......
Ok ? and your point is?
He don't need them.... unless he wants to.....
(2012-05-14, 16:14)MrKay Wrote: Sdpbc i only have the cpu cooler that comes with the fan on top Scythe Shuriken Rev. B 3 1100 and am not using the 80mm case fan cause it makes no difference and it's noisy as hell. my RPM once loged in to windows and not do anything but just look at the screen the RPM starts from 1000 to 1204 some time it even goes up to 2000 while not doing anything but just looking at the screen
(2012-05-14, 22:42)waver123 Wrote: MrKay,This guy "Customer Review" replaced the OEM case fan with a SilenX Effizio Silent 80mm......it seems that he is very happy with the silent case fan......
Can you check your cpu load during idle to see if anything is running? My stock stock rev B. fan is very quiet when power down, I set it to level 1 it was like spinning at 500 rpm in xbmc. I did replace the stock fan with a noctua but from beer it you set the antec fan to low it should be quiet as well.
(2012-05-14, 22:42)waver123 Wrote: MrKay,
Can you check your cpu load during idle to see if anything is running? My stock stock rev B. fan is very quiet when power down, I set it to level 1 it was like spinning at 500 rpm in xbmc. I did replace the stock fan with a noctua but from beer it you set the antec fan to low it should be quiet as well.
(2012-05-15, 00:58)Beer40oz Wrote: Well got my 90W PICO.....
This build is magic now! I tested with Prime95 and BAM! No more reboots!!!!!
This PICO is truly magic.
Now I have taken the FAN CAGE, BRACKET out.....
Used one double sided velcro to attach the ssd and a lots of zip ties...
No need to drill nothing with this PICO..... use the stock hole.
Well here is a video for you guys to see how clean of a build this is....
I am making more videos to show you guys temps as I am running a movie now to show.
Thanx to all who helped.....
Oh yes the seller of the PICO was so nice also to trow in the EU cord.... just have to ask.