Login at Kodi Home

PeterBoomhut · (This post was last modified: 2015-01-10, 23:55 by PeterBoomhut.)

After a crash caused by you tube add-on. I'll reboot again en take this TOP after several minutes.

Code:
Mem: 198532K used, 85004K free, 0K shrd, 28295248K buff, 28295296K cached

CPU: 82.5% usr 12.1% sys  0.6% nic  4.6% idle  0.0% io  0.0% irq  0.0% sirq

Load average: 1.08 0.82 0.41 2/102 504

  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND

  437     1 root     R     322m116.2   0 89.1 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd

   51     2 root     SW<      0  0.0   0  4.1 [VCHIQr-0]

  499   401 root     S     6836  2.4   0  0.5 sshd: root@pts/0

  504   501 root     R     2624  0.9   0  0.5 top

   50     2 root     SW<      0  0.0   0  0.4 [VCHIQ-0]

    4     2 root     SW       0  0.0   0  0.2 [kworker/0:0]

    3     2 root     SW       0  0.0   0  0.2 [ksoftirqd/0]

  197     1 root     S     7304  2.5   0  0.0 /usr/lib/systemd/systemd-udevd

  410     1 root     S     6916  2.4   0  0.0 /usr/bin/nmbd --configfile=/run/samba/smb.conf

  425     1 root     S     6904  2.4   0  0.0 /usr/bin/smbd --configfile=/run/samba/smb.conf

  377     1 root     S     4648  1.6   0  0.0 /usr/bin/wpa_supplicant -u

  374     1 root     S     4152  1.4   0  0.0 /usr/sbin/connmand -nr --config=/etc/connman/main.conf

  401     1 root     S     4088  1.4   0  0.0 /usr/sbin/sshd -D

    1     0 root     S     4048  1.4   0  0.0 /usr/lib/systemd/systemd

  378     1 root     S     3704  1.3   0  0.0 /usr/sbin/connman-vpnd -n

  287     1 dbus     S     2820  0.9   0  0.0 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --s

  226     1 avahi    S     2804  0.9   0  0.0 avahi-daemon: running [OpenELEC.local]

  501   499 root     S     2624  0.9   0  0.0 -sh

  362     1 root     S     2620  0.9   0  0.0 /sbin/crond -f -S

  389     1 root     S     2476  0.8   0  0.0 /usr/bin/rpcbind

  260     1 root     S     2420  0.8   0  0.0 /usr/lib/systemd/systemd-logind

  405     1 root     S     2348  0.8   0  0.0 /usr/sbin/lircd --uinput --driver=default --device=/dev/lirc0 --output=/r

  182     1 root     S     2336  0.8   0  0.0 /usr/lib/systemd/systemd-journald

  242     1 root     S     2148  0.7   0  0.0 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lirc

  106     2 root     SW<      0  0.0   0  0.0 [loop0]

   59     2 root     SW       0  0.0   0  0.0 [mmcqd/0]

    9     2 root     SW       0  0.0   0  0.0 [rcu_preempt]

   22     2 root     SW       0  0.0   0  0.0 [khubd]

   94     2 root     SW       0  0.0   0  0.0 [usb-storage]

   10     2 root     SW       0  0.0   0  0.0 [rcuop/0]

   57     2 root     SW       0  0.0   0  0.0 [kworker/u2:1]

    2     0 root     SW       0  0.0   0  0.0 [kthreadd]

    5     2 root     SW<      0  0.0   0  0.0 [kworker/0:0H]

    7     2 root     SW       0  0.0   0  0.0 [rcuc/0]

    8     2 root     SW       0  0.0   0  0.0 [rcub/0]

   11     2 root     SW       0  0.0   0  0.0 [rcu_sched]

   12     2 root     SW       0  0.0   0  0.0 [rcuos/0]

   13     2 root     SW       0  0.0   0  0.0 [rcu_bh]

   14     2 root     SW       0  0.0   0  0.0 [rcuob/0]

   15     2 root     SW       0  0.0   0  0.0 [watchdog/0]

   16     2 root     SW<      0  0.0   0  0.0 [khelper]

   17     2 root     SW       0  0.0   0  0.0 [kdevtmpfs]

PeterBoomhut · (This post was last modified: 2015-01-11, 00:56 by PeterBoomhut.)

Ahum, I did this,
Code:
systemctl stop kodi
mv .kodi .kodi.bak
systemctl start kodi

shiterde shit, al these settings again....

it seems to be that some settings are still there.
after I installed RPI config add-on , it looks like it was still there

PeterBoomhut · 2015-01-11, 01:17

Ok almost a brand new...kodi

Ok , late at the evening of 10-1-2015 23:39 (Amsterdam)

Almost (cut my hair) fresh: (without add-ons) and no overclock settings

The command : top

Code:
CPU: 84.1% usr 10.3% sys  0.5% nic  4.7% idle  0.0% io  0.0% irq  0.1% sirq

Load average: 1.06 1.03 0.96 2/103 667

  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND

  514     1 root     R     350m126.5   0 84.7 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd

   51     2 root     SW<      0  0.0   0  3.9 [VCHIQr-0]

  667   501 root     R     2624  0.9   0  0.5 top

   50     2 root     SW<      0  0.0   0  0.5 [VCHIQ-0]

The command : ./bcmstat.sh cxgd10

Code:
OpenELEC:~ # ./bcmstat.sh cxgd10

  Config: v0.1.8, args "cxgd10", priority lowest (+19)

Governor: ondemand

  Memory: 512MB (split 288MB ARM, 224MB GPU)

HW Block: |   ARM   |  Core  |  H264  |   SDRAM   |

Min Freq: |  700Mhz | 250Mhz |   0Mhz |   500Mhz  |

Max Freq: | 1000Mhz | 500Mhz | 250Mhz |   500Mhz  |

Voltages: |         +6, 1.350V        | 0, 1.200V |

   Other: temp_limit=85

Firmware: Dec 19 2014 18:40:20, version 5abd572e2ed1811283443387af09377b95501c50 (clean) (release)

  Codecs: H264 MPG2 VP8 VORBIS MJPG

  Booted: Sat Jan 10 21:47:08 2015

Time          ARM     Core     H264  Core Temp (Max)   IRQ/s      RX B/s      TX B/s  GPUMem Free   %user   %nice %system   %idle %iowait    %irq  %s/irq  %total  Memory Free/Used

========  =======  =======  =======  ===============  ======  ==========  ==========  ===========  ======  ======  ======  ======  ======  ======  ======  ======  ================

22:34:26  1000Mhz   500Mhz     0Mhz  61.60C (61.60C)   2,460          43         352  154M ( 75%)   83.08    2.98   13.71    0.00    0.00    0.00    0.00  100.00  207,944 kB/26.7%

22:34:40  1000Mhz   500Mhz     0Mhz  61.07C (61.60C)   2,432          37          73  154M ( 75%)   72.83    1.61   11.86    3.29    0.00    0.00    0.07   96.71  207,944 kB/26.7%

22:34:53  1000Mhz   500Mhz     0Mhz  61.60C (61.60C)   2,453          30         108  154M ( 75%)   71.07    1.53   12.42    4.52    0.00    0.00    0.00   95.48  207,944 kB/26.7%

22:35:06  1000Mhz   500Mhz     0Mhz  61.07C (61.60C)   2,440          30         108  154M ( 75%)   71.40    1.47   11.98    4.71    0.00    0.00    0.00   95.29  207,928 kB/26.7%

22:35:18  1000Mhz   499Mhz     0Mhz  61.07C (61.60C)   2,433          25          84  154M ( 75%)   75.15    1.43   10.16    3.57    0.00    0.00    0.08   96.43  207,952 kB/26.7%^C

Peak Values: IRQ: 2460, RX: 43, TX: 352

After installed RPI config Add-on:

Code:
Mem: 197304K used, 248792K free, 0K shrd, 15589584K buff, 15589632K cached

CPU: 66.7% usr 13.8% sys  0.3% nic 18.7% idle  0.0% io  0.0% irq  0.1% sirq

Load average: 0.82 0.81 0.57 2/104 508

  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND

  437     1 root     R     320m 73.3   0 75.3 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd

   51     2 root     SW<      0  0.0   0  3.3 [VCHIQr-0]

  499   403 root     S     6836  1.5   0  0.3 sshd: root@pts/0

OpenELEC:~ # ./bcmstat.sh cxgd10

  Config: v0.1.8, args "cxgd10", priority lowest (+19)

Governor: ondemand

  Memory: 512MB (split 448MB ARM, 64MB GPU)

HW Block: |   ARM   |  Core  |  H264  |   SDRAM   |

Min Freq: |  700Mhz | 250Mhz |   0Mhz |   500Mhz  |

Max Freq: | 1000Mhz | 500Mhz | 250Mhz |   500Mhz  |

Voltages: |         +6, 1.350V        | 0, 1.200V |

   Other: temp_limit=85

Firmware: Dec 19 2014 18:40:20, version 5abd572e2ed1811283443387af09377b95501c50 (clean) (release)

  Codecs: H264 MPG2 VP8 VORBIS MJPG

  Booted: Sat Jan 10 22:54:18 2015

Time          ARM     Core     H264  Core Temp (Max)   IRQ/s      RX B/s      TX B/s  GPUMem Free   %user   %nice %system   %idle %iowait    %irq  %s/irq  %total  Memory Free/Used

========  =======  =======  =======  ===============  ======  ==========  ==========  ===========  ======  ======  ======  ======  ======  ======  ======  ======  ================

23:12:16  1000Mhz   500Mhz     0Mhz  57.84C (57.84C)   2,470         178       1,435   22M ( 50%)   78.26    5.22   16.96    0.00    0.00    0.00    0.00  100.00  394,704 kB/11.5%

23:12:26  1000Mhz   500Mhz     0Mhz  57.30C (57.84C)   2,444          34         106   22M ( 50%)   71.97    0.94    7.90   17.59    0.00    0.09    0.00   82.41  394,704 kB/11.5%

23:12:37  1000Mhz   500Mhz     0Mhz  56.22C (57.84C)   2,442          48         103   22M ( 50%)   74.62    0.75    6.04   17.74    0.00    0.00    0.00   82.26  394,704 kB/11.5%

23:12:47  1000Mhz   500Mhz     0Mhz  57.30C (57.84C)   2,442          25         103   22M ( 50%)   74.51    1.04    5.84   17.80    0.00    0.00    0.00   82.20  394,704 kB/11.5%^C

Peak Values: IRQ: 2470, RX: 178, TX: 1435

I don't understand why nothing comes close to 20%

Milhouse · 2015-01-11, 03:04

Me neither. A stock system should not behave in this way, there's got to be something you've installed that you've not mentioned (our forgotten).

wrxtasy · 2015-01-11, 04:56

(2015-01-10, 19:27)PeterBoomhut Wrote: Something is eating my cpu!
Without my transcend USB3 stick, the system won't boot properly!

Get rid of this as its very little speed benefit unless you are either using a very old slow SD card or doing a lot of writes to the SD card. Streaming high bitrate video does not even need huge or fast external storage space anyway.

You have likely read old info from somewhere that was used back in the early days of the RPi, at a time when SD cards were slow and SD card corruption issues were common. All these problems have now been fixed with recent firmware.

As an example, my Overclocked microSDHC / RPi B+ streams Jellyfish test file at 60Mb/s without issues over NFS. 50Mb/s when using SMB.

Try putting a brand new image on to the SD card and use that ONLY without the USB complications your introducing.
Please follow these instructions:

http://wiki.openelec.tv/index.php/Instal...spberry_Pi

PeterBoomhut · 2015-01-11, 12:30

Ok, thx for the input , Milhouse and wrxtasy.
The only sofware a had installed was openelec.tv:
Openelec TV
and 5 add-ons:
1- Youtube from Bromix
2- Uitzending gemist ( a Dutch program)
3- RPi config (overclock tool)
4- Log uploader
5- iperf

after a fresh install:
systemctl stop kodi
mv .kodi .kodi.bak
systemctl start kodi

i did the command: top see: (Ok , late at the evening of 10-1-2015 23:39 (Amsterdam)

I will have to by a new micro -sd card, the tiny thing that I'm using now is a class 4 sdhc 8GB without a brand mark.

Do both gentleman have a link which one (brand) I shall choose.?

De software that I'm now using is from the link you suggested (wrxtasy).
The link doesn't work entirely on the site off
http://wiki.openelec.tv/index.php/Instal...spberry_Pi.

Yesterday evening, some peculiar thing happens: the rasp wouldn't play any h264 content any more.

wrxtasy · 2015-01-11, 14:34

Just put a new Openelec diskimage on the microSDHC card before you go about buying new things.

This is the one you want from Openelec, you will need a PC or Mac to put the image to the card:

http://releases.openelec.tv/OpenELEC-RPi...0.0.img.gz

One step at a time.

Milhouse · 2015-01-11, 15:04

(2015-01-11, 12:30)PeterBoomhut Wrote: i did the command: top see: (Ok , late at the evening of 10-1-2015 23:39 (Amsterdam)

I'm not seeing anything, did it make any difference?

(2015-01-11, 12:30)PeterBoomhut Wrote: Yesterday evening, some peculiar thing happens: the rasp wouldn't play any h264 content any more.

Without more detail it's impossible to say why that would happen - check your log for any errors.

PeterBoomhut · 2015-01-11, 17:49

I will begin with Mr/ Ms? Milhouse.
I created a log file, the error with h264:
Error h264

The fresh reinstalled kodi. It seems to be, It didn't accomplish what we (I) thought.
The CPU usages still going up to 80% and kodi is doing nothing!

I don't want to give up , why this is happening to my rasp,
I have documented this , how do you call it: bad behaviour of a raspberry!

So I will do what Mr wrxtasy prescribed : a new image , only on my SD card

menakite · 2015-01-11, 17:55

Code:
15:28:09 T:3042418688  NOTICE: ARM mem: 448MB GPU mem: 64MB

Increase this to at least 128 MB. 256 would be ideal.

PeterBoomhut · 2015-01-12, 09:53

PeterBoomhut · 2015-01-12, 12:08

Image installed, boot , startup config: Dutch | SSH Yes| Ip changed to static ip 192.168.1.110|
Reboot otherwise SSH doesn't work.
Command; top

Code:
Mem: 192772K used, 188300K free, 0K shrd, 10207168K buff, 10207216K cached

CPU: 88.0% usr 11.3% sys  0.5% nic  0.0% idle  0.0% io  0.0% irq  0.0% sirq

Load average: 1.10 0.98 0.52 2/98 490

  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND

  429     1 root     R     304m 81.5   0 94.3 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd

   51     2 root     SW<      0  0.0   0  3.5 [VCHIQr-0]

  490   487 root     R     2624  0.6   0  0.7 top

   50     2 root     SW<      0  0.0   0  0.5 [VCHIQ-0]

  485   422 root     S     6836  1.7   0  0.2 sshd: root@pts/0

  190     1 root     S     7328  1.9   0  0.0 /usr/lib/systemd/systemd-udevd

  400     1 root     S     6916  1.8   0  0.0 /usr/bin/nmbd --configfile=/run/samba/smb.conf

  415     1 root     S     6904  1.8   0  0.0 /usr/bin/smbd --configfile=/run/samba/smb.conf

  370     1 root     S     4648  1.2   0  0.0 /usr/bin/wpa_supplicant -u

  254     1 root     S     4152  1.0   0  0.0 /usr/sbin/connmand -nr --config=/etc/connman/main.conf

  422     1 root     S     4088  1.0   0  0.0 /usr/sbin/sshd -D

    1     0 root     S     4048  1.0   0  0.0 /usr/lib/systemd/systemd

  371     1 root     S     3708  0.9   0  0.0 /usr/sbin/connman-vpnd -n

next install :bcmstat
and execute it:

Code:
OpenELEC:~ # ./bcmstat.sh cxgd10

  Config: v0.1.8, args "cxgd10", priority lowest (+19)

Governor: ondemand

  Memory: 512MB (split 384MB ARM, 128MB GPU)

HW Block: |   ARM   |  Core  |  H264  |   SDRAM   |

Min Freq: |  700Mhz | 250Mhz |   0Mhz |   400Mhz  |

Max Freq: |  700Mhz | 250Mhz | 250Mhz |   400Mhz  |

Voltages: |         0, 1.200V         | 0, 1.200V |

   Other: temp_limit=85

Firmware: Dec 19 2014 18:40:20, version 5abd572e2ed1811283443387af09377b95501c50 (clean) (release)

  Codecs: H264 VP8 VORBIS MJPG

  Booted: Mon Jan 12 09:53:47 2015

Time          ARM     Core     H264  Core Temp (Max)   IRQ/s      RX B/s      TX B/s  GPUMem Free   %user   %nice %system   %idle %iowait    %irq  %s/irq  %total  Memory Free/Used

========  =======  =======  =======  ===============  ======  ==========  ==========  ===========  ======  ======  ======  ======  ======  ======  ======  ======  ================

10:05:35   700Mhz   250Mhz     0Mhz  46.54C (46.54C)   2,427          34         106   74M ( 68%)   85.62    1.82   12.45    0.00    0.00    0.00    0.10  100.00  330,696 kB/13.2%

10:05:59   700Mhz   250Mhz     0Mhz  46.54C (46.54C)   2,438          66          75   74M ( 68%)   87.64    1.28   11.33    0.04    0.00    0.00    0.04   99.96  330,696 kB/13.2%

10:06:23   700Mhz   250Mhz     0Mhz  46.54C (46.54C)   2,442          47          77   74M ( 68%)   86.89    1.21   11.47    0.00    0.00    0.00    0.04  100.00  330,696 kB/13.2%

10:06:46   700Mhz   250Mhz     0Mhz  46.54C (46.54C)   2,442          35          88   74M ( 68%)   87.91    1.31   10.99    0.00    0.00    0.00    0.04  100.00  330,696 kB/13.2%

10:07:10   700Mhz   250Mhz     0Mhz  46.54C (46.54C)   2,454          37          71   74M ( 68%)   88.84    1.25   10.31    0.04    0.00    0.00    0.00   99.96  330,696 kB/13.2%

10:07:33   700Mhz   250Mhz     0Mhz  46.54C (46.54C)   2,440          49          80   74M ( 68%)   87.37    1.30   10.84    0.00    0.00    0.00    0.04  100.00  330,696 kB/13.2%^C

Peak Values: IRQ: 2454, RX: 66, TX: 106

Bad rasp??

PeterBoomhut · (This post was last modified: 2015-01-12, 12:27 by PeterBoomhut.)

menakite, RPI config: Turbo (1000MHz) and GPU mem 256

Thus now overclocked by RPi add-on settings Turbo = 1000MHz and rebooting to make changes active.

this seems to be better:

Code:
Mem: 194632K used, 56588K free, 0K shrd, 26247104K buff, 26247152K cached

CPU: 23.5% usr  4.1% sys  0.4% nic 71.8% idle  0.0% io  0.0% irq  0.0% sirq

Load average: 0.21 0.31 0.18 2/100 498

  PID  PPID USER     STAT   VSZ %VSZ CPU %CPU COMMAND

  429     1 root     S     313m127.2   0 26.5 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd

  498   495 root     R     2624  1.0   0  0.6 top

  493   394 root     S     6836  2.7   0  0.4 sshd: root@pts/0

   51     2 root     SW<      0  0.0   0  0.4 [VCHIQr-0]

   61     2 root     SW       0  0.0   0  0.2 [kworker/u2:2]

  190     1 root     S     7304  2.9   0  0.0 /usr/lib/systemd/systemd-udevd

  403     1 root     S     6916  2.7   0  0.0 /usr/bin/nmbd --configfile=/run/samba/smb.conf

command: bcmstat:

Code:
OpenELEC:~ # ./bcmstat.sh cxgd10

  Config: v0.1.8, args "cxgd10", priority lowest (+19)

Governor: ondemand

  Memory: 512MB (split 256MB ARM, 256MB GPU)

HW Block: |   ARM   |  Core  |  H264  |   SDRAM   |

Min Freq: |  700Mhz | 250Mhz |   0Mhz |   500Mhz  |

Max Freq: | 1000Mhz | 500Mhz | 250Mhz |   500Mhz  |

Voltages: |         +6, 1.350V        | 0, 1.200V |

   Other: temp_limit=85

Firmware: Dec 19 2014 18:40:20, version 5abd572e2ed1811283443387af09377b95501c50 (clean) (release)

  Codecs: H264 VP8 VORBIS MJPG

  Booted: Mon Jan 12 10:15:06 2015

Time          ARM     Core     H264  Core Temp (Max)   IRQ/s      RX B/s      TX B/s  GPUMem Free   %user   %nice %system   %idle %iowait    %irq  %s/irq  %total  Memory Free/Used

========  =======  =======  =======  ===============  ======  ==========  ==========  ===========  ======  ======  ======  ======  ======  ======  ======  ======  ================

10:22:47  1000Mhz   500Mhz     0Mhz  43.31C (43.31C)   2,492         881       7,108  197M ( 83%)    5.98   47.84   41.86    0.00    0.00    0.00    0.00  100.00  200,536 kB/20.2%

10:22:58   700Mhz   250Mhz   250Mhz  41.16C (43.31C)   2,442          46         108  197M ( 83%)   20.83    1.27    5.74   67.46    0.00    0.10    0.00   32.54  200,520 kB/20.2%

10:23:08   700Mhz   250Mhz   250Mhz  41.16C (43.31C)   2,442          57         102  197M ( 83%)   20.83    1.16    5.72   67.44    0.00    0.00    0.10   32.56  200,536 kB/20.2%

10:23:18   700Mhz   500Mhz   250Mhz  41.16C (43.31C)   2,441          26         102  197M ( 83%)   20.78    1.47    4.90   68.13    0.00    0.00    0.10   31.87  200,520 kB/20.2%

10:23:28   700Mhz   250Mhz   250Mhz  41.16C (43.31C)   2,442          49         102  197M ( 83%)   21.99    1.27    4.28   67.64    0.00    0.00    0.00   32.36  200,520 kB/20.2%

10:23:39   699Mhz   250Mhz   250Mhz  41.16C (43.31C)   2,442          54         107  197M ( 83%)   21.28    1.17    4.29   68.22    0.00    0.00    0.00   31.78  200,536 kB/20.2%

10:23:49   700Mhz   250Mhz   250Mhz  41.16C (43.31C)   2,441          26         102  197M ( 83%)   21.38    1.27    4.59   67.28    0.00    0.00    0.00   32.72  200,528 kB/20.2%

10:23:59   700Mhz   250Mhz   250Mhz  40.62C (43.31C)   2,441          26         102  197M ( 83%)   19.99    1.46    4.78   68.76    0.00    0.00    0.10   31.24  200,528 kB/20.2%^C

Peak Values: IRQ: 2492, RX: 881, TX: 7108

All this after OVERCLOCKING?

PeterBoomhut · (This post was last modified: 2015-01-12, 13:25 by PeterBoomhut.)

After entering code mpeg2 top and bcmstat doesn't gif different results.

after nfs rooting to my rasp:

Code:
Time          ARM     Core     H264  Core Temp (Max)   IRQ/s      RX B/s      TX B/s  GPUMem Free   %user   %nice %system   %idle %iowait    %irq  %s/irq  %total  Memory Free/Used

========  =======  =======  =======  ===============  ======  ==========  ==========  ===========  ======  ======  ======  ======  ======  ======  ======  ======  ================

10:45:28   700Mhz   250Mhz   250Mhz  40.62C (48.15C)   2,438          31         173  195M ( 82%)   16.04    1.47    1.56   75.48    0.00    0.00    0.00   24.52  193,784 kB/22.9%

10:45:39   700Mhz   250Mhz   250Mhz  40.62C (48.15C)   2,438          31         101  195M ( 82%)   15.94    1.27    2.05   75.48    0.00    0.00    0.00   24.52  193,768 kB/22.9%

after 5 links made routing to my pc /partitions / directory's it seem to be cost 5% more cpu power.:

Code:
11:00:36   699Mhz   250Mhz   250Mhz  41.16C (48.15C)   2,438          54         107  186M ( 78%)   20.99    1.56    5.37   67.27    0.00    0.00    0.00   32.73  192,028 kB/23.6%

11:00:46   700Mhz   250Mhz   250Mhz  40.08C (48.15C)   2,438          31         102  186M ( 78%)   20.99    1.75    5.05   67.72    0.00    0.00    0.10   32.28  192,036 kB/23.6%

Playback a DVD (Mpeg2) :

Code:
Time          ARM     Core     H264  Core Temp (Max)   IRQ/s      RX B/s      TX B/s  GPUMem Free   %user   %nice %system   %idle %iowait    %irq  %s/irq  %total  Memory Free/Used

========  =======  =======  =======  ===============  ======  ==========  ==========  ===========  ======  ======  ======  ======  ======  ======  ======  ======  ================

11:06:06  1000Mhz   500Mhz   250Mhz  43.31C (48.15C)   2,714   1,027,590      30,414  180M ( 76%)   39.93    0.88   13.51   38.85    0.00    0.00    2.64   61.15  179,920 kB/28.4%

11:06:16  1000Mhz   500Mhz   250Mhz  44.39C (48.15C)   2,711   1,014,802      30,129  180M ( 76%)   37.66    0.98   14.48   40.60    0.00    0.00    2.35   59.40  179,800 kB/28.4%

Playback h264 without pass-trough audio (I hadn't change the standard settings)

Code:
12:43   999Mhz   500Mhz   250Mhz  47.08C (48.15C)   3,697   2,235,878     115,744  148M ( 62%)   39.67    1.14   17.52   19.31    0.00    0.09    6.34   80.69  163,152 kB/35.1%

12:53  1000Mhz   500Mhz   250Mhz  47.08C (48.15C)   3,649   2,157,874     111,693  148M ( 62%)   39.65    0.94   17.02   19.55    0.00    0.00    5.52   80.45  163,152 kB/35.1%

13:04  1000Mhz   500Mhz   250Mhz  47.08C (48.15C)   3,738   2,290,420     118,548  148M ( 62%)   35.98    1.05   16.41   22.71    0.00    0.00    6.01   77.29  163,152 kB/35.1%

13:15  1000Mhz   500Mhz   250Mhz  46.54C (48.15C)   3,727   2,285,645     118,301  148M ( 62%)   38.44    1.14   16.10   21.12    0.00    0.00    6.06   78.88  163,152 kB/35.1%

Playback h264 with passtrough and still stuttering after several minutes

Code:
Time          ARM     Core     H264  Core Temp (Max)   IRQ/s      RX B/s      TX B/s  GPUMem Free   %user   %nice %system   %idle %iowait    %irq  %s/irq  %total  Memory Free/Used

========  =======  =======  =======  ===============  ======  ==========  ==========  ===========  ======  ======  ======  ======  ======  ======  ======  ======  ================

11:22:55  1000Mhz   499Mhz   250Mhz  48.69C (57.30C)   3,516   2,637,567     105,106  150M ( 63%)   31.59    1.04   23.39   23.20    0.00    0.00    7.36   76.80  149,120 kB/40.6%

11:23:05  1000Mhz   500Mhz   250Mhz  48.69C (57.30C)   3,511   2,621,877     104,400  150M ( 63%)   30.26    1.04   23.07   23.64    0.00    0.00    6.62   76.36  149,120 kB/40.6%

11:23:16  1000Mhz   500Mhz   250Mhz  48.69C (57.30C)   3,546   2,691,499     107,170  150M ( 63%)   28.75    0.95   24.09   25.61    0.00    0.19    5.62   74.39  149,120 kB/40.6%

11:23:26  1000Mhz   500Mhz   250Mhz  47.62C (57.30C)   3,742   3,112,907     123,934  150M ( 63%)   25.83    1.15   17.86   31.30    0.00    0.00    5.38   68.70  149,120 kB/40.6%

11:23:37  1000Mhz   499Mhz   250Mhz  48.69C (57.30C)   3,380   2,303,891      91,752  150M ( 63%)   29.46    1.15   21.81   27.73    0.00    0.10    5.26   72.27  149,112 kB/40.6%

11:23:47   999Mhz   500Mhz   250Mhz  48.69C (57.30C)   3,356   2,230,420      88,829  150M ( 63%)   28.82    1.05   20.52   29.87    0.00    0.10    5.44   70.13  149,120 kB/40.6%

Kavomatovlweks · 2015-01-14, 11:04

Do you have a Windows 98 computer with a parallel port that can operate in bidirectional mode available on which to run it?