[Nekromantik]

Hi all
I running latest nightly of LE on my Pi4,
However on non HD audio tracks like AAC if I pause a video for a few mins and unpause the centre channel audio gets sent to right or left speaker,
This is via passthrough enabled.
For HD audio I get no audio.
Running Pi to my AVR and then TV.
Below is log

https://paste.ee/p/LVOrS

[popcornmix]

There is no AAC passthrough, so I suspect the issue will occur with passthrough enabled or disabled.
You could try enabling AC3 transcoding - you need to set number of channel2 to 2 first (and you will till get multichannel output).
It would also be useful to know if this issue occurs on LE Matrix build.

[popcornmix]

Also can you test setting "keep audio device alive" to "Always".

[Nekromantik]

There is no AAC passthrough, so I suspect the issue will occur with passthrough enabled or disabled.
You could try enabling AC3 transcoding - you need to set number of channel2 to 2 first (and you will till get multichannel output).
It would also be useful to know if this issue occurs on LE Matrix build.

Well on DD+ files I get no audio and that used to work fine.
Also noticed on LE my ethernet port always sets itself as 100mb but on Pi OS it sets itself correctly to 1000mb.
On LE forum someone says the log shows network errors. Could that be cause of no audio?

[Nekromantik]

Also can you test setting "keep audio device alive" to "Always".

Can try that