HTPC not seen by HDMI once i turn off/on monitor - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: OS independent / Other (https://forum.kodi.tv/forumdisplay.php?fid=228) +---- Thread: HTPC not seen by HDMI once i turn off/on monitor (/showthread.php?tid=129629) |
HTPC not seen by HDMI once i turn off/on monitor - aoaaron - 2012-04-22 Okay so my HTPC works fine and is identified okay by my Samsung T220HD monitor. However, when I turn off the monitor, and turn it back on, it no longer sees my HTPC as an input source and I have to restart the HTPC etc. Any fixes please? HTPC: ER1401 connected by HDMI running Win7 RE: HTPC not seen by HDMI once i turn off/on monitor - PatK - 2012-04-23 This is HTCP (re:copy protection) handshaking issues between your panel and the graphic output on the HDMI you really have to re-initialize that handshaking; with some just a disconnection and re-connect of the HDMI cable does it. With others, it's the monitor has to be on... before boot, and with others the screen goes black in 3 seconds after the handshake... go figure. Other than a Samsung bios fix, you'll have to learn to live with it. Depending of the graphics card you have... you might try to reset the display. With windows 7 hit the winkey + P key and flip left and right arrows/return.. which should cause the screen to move around and re-initialize. It's a pain when you're doing it blind, so try it once with the display up... let us know if you get lucky. RE: HTPC not seen by HDMI once i turn off/on monitor - gate1975mlm - 2012-04-27 HDMI Detective will fix this issue!!! http://www.amazon.com/Gefen-EXT-HDMI-EDIDP-HDmi-Detective-Plus/dp/B001RIMZUW |