2013-05-22, 17:38
What happens, if you boot with that one:
And post the same again? You can obviously change the Color flags - but keep the rest as is, please. Just for the output - color can be fixed later.
Edit: Missed to remove a # - so make sure VertRefresh is uncommented.
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
# 23.976 and 24.0 refresh rates
ModeLine "1920x1080_24" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
ModeLine "1920x1080_23.976" 74.175 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
Option "DPMS"
Option "DPI" "96 x 96"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
#
# This is the first step
# Uncomment the ModeDebug option and reboot
# get the nvidia xconfig, see:
# http://wiki.openelec.tv/index.php?title=Config_EDID_nvidia
# you only need to download the version for your setup (32 or 64)
# and issue one command afterwards
#
# Option "ModeDebug" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "ColorRange" "FULL" # Set to Limited if all is too dark
Option "ColorSpace" "RGB"
Option "DynamicTwinView" "false"
Option "ExactModeTimingsDVI" "True"
# this is the second step
# check /var/log/Xorg.0.0.log to see if your nvidia is realy DFP-1
# could also be DFP-0 or something else
# make sure your TV can do 60hz
# uncomment all the next options, adjust DFP-1 to DFP-X e.g. DFP-0 or DFP-2 if needed
Option "VertRefresh" "DFP-2: 23-60"
Option "HorizSync" "DFP-2: 25-100"
Option "ModeValidation" "DFP-2: NoVesaModes, NoXServerModes"
Option "ConnectedMonitor" "DFP-2"
Option "CustomEDID" "DFP-2:/etc/X11/edid.bin"
Option "UseEDID" "true"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
And post the same again? You can obviously change the Color flags - but keep the rest as is, please. Just for the output - color can be fixed later.
Edit: Missed to remove a # - so make sure VertRefresh is uncommented.