•   
  • 1
  • 34
  • 35
  • 36(current)
  • 37
  • 38
  • 95
  •   
DSPlayer (DirectShow Player for XBMC) Frodo build available
(2014-02-03, 12:55)Simkin84 Wrote: The audio sync issue are the well known 24p "bug" 50 and 60hz are fine. Was hoping that with DS i could get perfect audio sync. I have been troubleshooting alot on this, and it seems not so easy to fix.

Not trying to push you away from DSPlayer, but I take it you are aware that you can set a global audio delay, using advancedsettings in the default player. These can be set against each refresh rate you have issues with - in your case you can leave 50 and 60hz as they are and introduce a delay for only 24 material.

Have a look here http://wiki.xbmc.org/index.php?title=Adv...3Cvideo.3E under <latency>.
Reply
(2014-02-03, 13:51)steelman1991 Wrote:
(2014-02-03, 12:55)Simkin84 Wrote: The audio sync issue are the well known 24p "bug" 50 and 60hz are fine. Was hoping that with DS i could get perfect audio sync. I have been troubleshooting alot on this, and it seems not so easy to fix.

Not trying to push you away from DSPlayer, but I take it you are aware that you can set a global audio delay, using advancedsettings in the default player. These can be set against each refresh rate you have issues with - in your case you can leave 50 and 60hz as they are and introduce a delay for only 24 material.

Have a look here http://wiki.xbmc.org/index.php?title=Adv...3Cvideo.3E under <latency>.

Im aware of that. But using this, will also delay the subtitles from what i understand.

A quick question about xml files. Do they need to be edited in a specific program? Can i use a notepad file and call it xml?
HTPC: AMD A10-7850K - MSI A78M-E45 V2 - HyperX Genesis 8GB DDR3 1866Mhz - 120GB+240GB HyperX SSD + 86TB HGST HDD
Plasma: Panasonic TX-P65VT60 Receiver: Yamaha RX-A3020 Surround: Jamo S608, Jamo C60 Center + C60 Surround Subwoofer: XTZ W12.18 ICE
Kodi 14.2 w/Shednox v.3.0
Reply
Not that I've witnessed - though I have few files with subtitles (occasional 'forced' streams).

Yes .xml files can be edited in notepad, just be sure you 'save as', 'all files' and delete the default .txt extension, otherwise you'll end up with a "abcd.xml.txt" file and it won't work.
Reply
(2014-02-03, 00:57)KenV99 Wrote: Make sure you still are using CUDA. I had that get turned off accidentally when I was working on the system via RDP.

that may be something with mine as well, i remote into my pc from work quite a bit. ill check it tonight.... i also had it set to turn off aero while XBMC is running. i had an issue with white flashing that it seemed to help when i had that turned off. (that was on the original XBMC version) ill try turning that off also. i shouldnt need both those audio codecs running as well right?
Reply
What exactly do i need to set up to use DS player?

It seems like a awful lot of tweaking, filters, xml and what not.. any basic settings i can use? my audio sync are fine with MPC-HC, so it would be nice to get started with DS in XBMC.

Any starting tips?

My hardware are:
AMD A10
Yamaha RX-A2010 AV Receiver
Panasonic VT30 Plasma (24p capable)

Most of my videos are mkv bluray rips 1080p, with DTS/DD and DTS-HD/TrueHD.


Any help would be appreciated :=)
HTPC: AMD A10-7850K - MSI A78M-E45 V2 - HyperX Genesis 8GB DDR3 1866Mhz - 120GB+240GB HyperX SSD + 86TB HGST HDD
Plasma: Panasonic TX-P65VT60 Receiver: Yamaha RX-A3020 Surround: Jamo S608, Jamo C60 Center + C60 Surround Subwoofer: XTZ W12.18 ICE
Kodi 14.2 w/Shednox v.3.0
Reply
Read post #1, oh and the link in post #521.
Reply
(2014-02-03, 17:52)gregh77 Wrote:
(2014-02-03, 00:57)KenV99 Wrote: Make sure you still are using CUDA. I had that get turned off accidentally when I was working on the system via RDP.

that may be something with mine as well, i remote into my pc from work quite a bit. ill check it tonight.... i also had it set to turn off aero while XBMC is running. i had an issue with white flashing that it seemed to help when i had that turned off. (that was on the original XBMC version) ill try turning that off also. i shouldnt need both those audio codecs running as well right?

Definitely not. I know I sound like a broken record, but I really think using graphstudionext is the way to sort out what is loaded and how it is connected and to watch as you tweak.
Reply
(2014-02-03, 22:34)Simkin84 Wrote: What exactly do i need to set up to use DS player?

It seems like a awful lot of tweaking, filters, xml and what not.. any basic settings i can use? my audio sync are fine with MPC-HC, so it would be nice to get started with DS in XBMC.

Any starting tips?

My hardware are:
AMD A10
Yamaha RX-A2010 AV Receiver
Panasonic VT30 Plasma (24p capable)

Most of my videos are mkv bluray rips 1080p, with DTS/DD and DTS-HD/TrueHD.


Any help would be appreciated :=)

If your new to xbmc dsplayer just give it a try
if want you can use my xml files they have been working for me just fine

First delete all previous versions of xbmc

Download latest xbmc dsplayer build from first page
Download and install Notepad ++ use this to edit xml files
Download and install LAV Filters Installer x86/x64
Download and install AV Splitter

Go into Program Files/XBMC/system/players/dsplayer

filtersconfig.xml
Open Copy & Replace
Code:
<filtersconfig>
<filters>
<!-- Source -->
  <filter name="lavfsource" type="source">
   <path>LAVSplitter.ax</path>
   <guid>{B98D13E7-55DB-4385-A33D-09FD1BA26338}</guid>
   <osdname>LAV Splitter Source</osdname>
  </filter>
  <filter name="avsource" type="source">    
    <guid>{D8980E15-E1F6-4916-A10F-D7EB4E9E10B8}</guid>    
    <osdname>AV Source</osdname>
  </filter>
<!-- Splitters -->
  <filter name="lavfsplitter" type="splitter">
   <path>LAVSplitter.ax</path>
   <guid>{171252A0-8820-4AFE-9DF8-5C92B2D66B04}</guid>
   <osdname>LAV Splitter</osdname>
  </filter>  
  <filter name="avsplitter" type="splitter">
   <guid>{529A00DB-0C43-4F5B-8EF2-05004CBE0C6F}</guid>
   <osdname>AV Splitter</osdname>
  </filter>
<!-- Video -->
   <filter name="lavvideodec" type="videodec">
   <path>LAVVideo.ax</path>
   <guid>{EE30215D-164F-4A92-A4EB-9D4C13390F9F}</guid>
   <osdname>LAV Video Decoder</osdname>
  </filter>
  <filter name="mpcvideodec" type="videodec">
   <path>MPCVideoDec.ax</path>
   <guid>{008BAC12-FBAF-497B-9670-BC6F6FBAE2C4}</guid>
   <osdname>MPC Video Decoder</osdname>
  </filter>
<!-- Audio -->
  <filter name="lavaudiodec" type="audiodec">
   <path>LAVAudio.ax</path>
   <guid>{E8E73B6B-4CB3-44A4-BE99-4F7BCB96E491}</guid>
   <osdname>LAV Audio Decoder</osdname>
  </filter>  
<!-- Extra -->
  <filter name="ffdraw" type="extra">
   <guid>{0B390488-D80F-4A68-8408-48DC199F0E97}</guid>
   <osdname>FFdshow RAW</osdname>
  </filter>
</filters>
</filtersconfig>

mediaconfig.xml
Open Copy & Replace
Code:
<mediasconfig>
<rules>  
  <rule filetypes="avi|mkv|mp4|m4v|flv|mov|mpg|ts|mts|m2ts|bdmv|mpls">
   <source filter="avsource" />
   <splitter filter="avsource" />
   <video filter="lavvideodec" />  
   <audio filter="lavaudiodec" />
   </rule>
</rules>
</mediasconfig>

Go into Program Files/XBMC/system

playercorefactory.xml
Copy & Replace
Code:
<playercorefactory>
  <players>
    <!-- These are compiled-in as re-ordering them would break scripts
    The following aliases may also be used:
      audiodefaultplayer, videodefaultplayer, videodefaultdvdplayer
    <player name="DVDPlayer" audio="true" video="true" />
    <player name="DVDPlayer" /> placeholder for MPlayer
    <player name="PAPlayer" audio="true" />
    -->
  </players>

  <rules name="system rules">
    <rule name="rtv" protocols="rtv" player="DVDPlayer" />
    <rule name="hdhomerun/myth/rtmp/mms/udp" protocols="hdhomerun|myth|cmyth|rtmp|mms|mmsh|udp" player="DVDPlayer" />
    <rule name="lastfm/shout" protocols="lastfm|shout" player="PAPlayer" />

    <!-- dvdplayer can play standard rtsp streams -->
    <rule name="rtsp" protocols="rtsp" filetypes="!(rm|ra)"  player="PAPlayer" />

    <!-- Internet streams -->
    <rule name="streams" internetstream="true">
      <rule name="flv/aacp/sdp" mimetypes="video/x-flv|video-flv|audio/aacp|application/sdp" player="DVDPlayer" />
      <rule name="mp2" mimetypes="application/octet-stream" filetypes="mp2" player="PAPlayer" />
    </rule>

    <!-- DVDs -->
    <rule name="dvd" dvd="true" player="videodefaultdvdplayer" />
    <rule name="dvdfile" dvdfile="true" player="videodefaultdvdplayer" />
    <rule name="dvdimage" dvdimage="true" player="videodefaultdvdplayer" />

    <!-- Only dvdplayer can handle these normally -->
    <rule name="sdp/asf" filetypes="sdp|asf" player="DVDPlayer" />

    <!-- Pass these to dvdplayer as we do not know if they are audio or video -->
    <rule name="nsv" filetypes="nsv" player="DVDPlayer" />
  
     <!-- Youtube video -->
     <rule name="youtube" filename=".*youtube.*" player="DVDPlayer" />
    
     <!-- DSPlayer rules: set network streams to DVDPlayer -->
    <rule name="other" protocols="daap|rtv|rtsp|rtmp|http|https|rtmpe|rtsp|mms|rtp|pvr" player="DVDPlayer" />
  </rules>
  
</playercorefactory>

Then make sure you setup Windows HDMI audio
Optoma HD Projector, Panasonic TX-P65VT65 Plasma, Pioneer SC2023 AVR, Kef Q65 main, iQ8ds rear, XQ2C centre, XBOX 360 Elite, Samsung LE40C650, SKY HD, Lutron Lighting, Crestron AV2 control

(Server)CPU - AMD Phenom ii 560, MB - M4A78LT-M, 32GB Corsair SSD, 4GB Corsair DDR3, 6x 1.5TB HDD's

XBMC Clients x2 (DSPlayer)
Reply
(2014-02-04, 01:38)indiejones Wrote:
(2014-02-03, 22:34)Simkin84 Wrote: What exactly do i need to set up to use DS player?

It seems like a awful lot of tweaking, filters, xml and what not.. any basic settings i can use? my audio sync are fine with MPC-HC, so it would be nice to get started with DS in XBMC.

Any starting tips?

My hardware are:
AMD A10
Yamaha RX-A2010 AV Receiver
Panasonic VT30 Plasma (24p capable)

Most of my videos are mkv bluray rips 1080p, with DTS/DD and DTS-HD/TrueHD.


Any help would be appreciated :=)

If your new to xbmc dsplayer just give it a try
if want you can use my xml files they have been working for me just fine

First delete all previous versions of xbmc

Download latest xbmc dsplayer build from first page
Download and install Notepad ++ use this to edit xml files
Download and install LAV Filters Installer x86/x64
Download and install AV Splitter

Go into Program Files/XBMC/system/players/dsplayer

filtersconfig.xml
Open Copy & Replace
Code:
<filtersconfig>
<filters>
<!-- Source -->
  <filter name="lavfsource" type="source">
   <path>LAVSplitter.ax</path>
   <guid>{B98D13E7-55DB-4385-A33D-09FD1BA26338}</guid>
   <osdname>LAV Splitter Source</osdname>
  </filter>
  <filter name="avsource" type="source">    
    <guid>{D8980E15-E1F6-4916-A10F-D7EB4E9E10B8}</guid>    
    <osdname>AV Source</osdname>
  </filter>
<!-- Splitters -->
  <filter name="lavfsplitter" type="splitter">
   <path>LAVSplitter.ax</path>
   <guid>{171252A0-8820-4AFE-9DF8-5C92B2D66B04}</guid>
   <osdname>LAV Splitter</osdname>
  </filter>  
  <filter name="avsplitter" type="splitter">
   <guid>{529A00DB-0C43-4F5B-8EF2-05004CBE0C6F}</guid>
   <osdname>AV Splitter</osdname>
  </filter>
<!-- Video -->
   <filter name="lavvideodec" type="videodec">
   <path>LAVVideo.ax</path>
   <guid>{EE30215D-164F-4A92-A4EB-9D4C13390F9F}</guid>
   <osdname>LAV Video Decoder</osdname>
  </filter>
  <filter name="mpcvideodec" type="videodec">
   <path>MPCVideoDec.ax</path>
   <guid>{008BAC12-FBAF-497B-9670-BC6F6FBAE2C4}</guid>
   <osdname>MPC Video Decoder</osdname>
  </filter>
<!-- Audio -->
  <filter name="lavaudiodec" type="audiodec">
   <path>LAVAudio.ax</path>
   <guid>{E8E73B6B-4CB3-44A4-BE99-4F7BCB96E491}</guid>
   <osdname>LAV Audio Decoder</osdname>
  </filter>  
<!-- Extra -->
  <filter name="ffdraw" type="extra">
   <guid>{0B390488-D80F-4A68-8408-48DC199F0E97}</guid>
   <osdname>FFdshow RAW</osdname>
  </filter>
</filters>
</filtersconfig>

mediaconfig.xml
Open Copy & Replace
Code:
<mediasconfig>
<rules>  
  <rule filetypes="avi|mkv|mp4|m4v|flv|mov|mpg|ts|mts|m2ts|bdmv|mpls">
   <source filter="avsource" />
   <splitter filter="avsource" />
   <video filter="lavvideodec" />  
   <audio filter="lavaudiodec" />
   </rule>
</rules>
</mediasconfig>

Go into Program Files/XBMC/system

playercorefactory.xml
Copy & Replace
Code:
<playercorefactory>
  <players>
    <!-- These are compiled-in as re-ordering them would break scripts
    The following aliases may also be used:
      audiodefaultplayer, videodefaultplayer, videodefaultdvdplayer
    <player name="DVDPlayer" audio="true" video="true" />
    <player name="DVDPlayer" /> placeholder for MPlayer
    <player name="PAPlayer" audio="true" />
    -->
  </players>

  <rules name="system rules">
    <rule name="rtv" protocols="rtv" player="DVDPlayer" />
    <rule name="hdhomerun/myth/rtmp/mms/udp" protocols="hdhomerun|myth|cmyth|rtmp|mms|mmsh|udp" player="DVDPlayer" />
    <rule name="lastfm/shout" protocols="lastfm|shout" player="PAPlayer" />

    <!-- dvdplayer can play standard rtsp streams -->
    <rule name="rtsp" protocols="rtsp" filetypes="!(rm|ra)"  player="PAPlayer" />

    <!-- Internet streams -->
    <rule name="streams" internetstream="true">
      <rule name="flv/aacp/sdp" mimetypes="video/x-flv|video-flv|audio/aacp|application/sdp" player="DVDPlayer" />
      <rule name="mp2" mimetypes="application/octet-stream" filetypes="mp2" player="PAPlayer" />
    </rule>

    <!-- DVDs -->
    <rule name="dvd" dvd="true" player="videodefaultdvdplayer" />
    <rule name="dvdfile" dvdfile="true" player="videodefaultdvdplayer" />
    <rule name="dvdimage" dvdimage="true" player="videodefaultdvdplayer" />

    <!-- Only dvdplayer can handle these normally -->
    <rule name="sdp/asf" filetypes="sdp|asf" player="DVDPlayer" />

    <!-- Pass these to dvdplayer as we do not know if they are audio or video -->
    <rule name="nsv" filetypes="nsv" player="DVDPlayer" />
  
     <!-- Youtube video -->
     <rule name="youtube" filename=".*youtube.*" player="DVDPlayer" />
    
     <!-- DSPlayer rules: set network streams to DVDPlayer -->
    <rule name="other" protocols="daap|rtv|rtsp|rtmp|http|https|rtmpe|rtsp|mms|rtp|pvr" player="DVDPlayer" />
  </rules>
  
</playercorefactory>

Then make sure you setup Windows HDMI audio

Thank you so much.

If i delete xbmc, will all my custom menus, movies and such be gone?

And with your xml files, will my receiver be encoding the audio?
HTPC: AMD A10-7850K - MSI A78M-E45 V2 - HyperX Genesis 8GB DDR3 1866Mhz - 120GB+240GB HyperX SSD + 86TB HGST HDD
Plasma: Panasonic TX-P65VT60 Receiver: Yamaha RX-A3020 Surround: Jamo S608, Jamo C60 Center + C60 Surround Subwoofer: XTZ W12.18 ICE
Kodi 14.2 w/Shednox v.3.0
Reply
(2014-02-04, 09:06)Simkin84 Wrote:
(2014-02-04, 01:38)indiejones Wrote:
(2014-02-03, 22:34)Simkin84 Wrote: What exactly do i need to set up to use DS player?

It seems like a awful lot of tweaking, filters, xml and what not.. any basic settings i can use? my audio sync are fine with MPC-HC, so it would be nice to get started with DS in XBMC.

Any starting tips?

My hardware are:
AMD A10
Yamaha RX-A2010 AV Receiver
Panasonic VT30 Plasma (24p capable)

Most of my videos are mkv bluray rips 1080p, with DTS/DD and DTS-HD/TrueHD.


Any help would be appreciated :=)

If your new to xbmc dsplayer just give it a try
if want you can use my xml files they have been working for me just fine

First delete all previous versions of xbmc

Download latest xbmc dsplayer build from first page
Download and install Notepad ++ use this to edit xml files
Download and install LAV Filters Installer x86/x64
Download and install AV Splitter

Go into Program Files/XBMC/system/players/dsplayer

filtersconfig.xml
Open Copy & Replace
Code:
<filtersconfig>
<filters>
<!-- Source -->
  <filter name="lavfsource" type="source">
   <path>LAVSplitter.ax</path>
   <guid>{B98D13E7-55DB-4385-A33D-09FD1BA26338}</guid>
   <osdname>LAV Splitter Source</osdname>
  </filter>
  <filter name="avsource" type="source">    
    <guid>{D8980E15-E1F6-4916-A10F-D7EB4E9E10B8}</guid>    
    <osdname>AV Source</osdname>
  </filter>
<!-- Splitters -->
  <filter name="lavfsplitter" type="splitter">
   <path>LAVSplitter.ax</path>
   <guid>{171252A0-8820-4AFE-9DF8-5C92B2D66B04}</guid>
   <osdname>LAV Splitter</osdname>
  </filter>  
  <filter name="avsplitter" type="splitter">
   <guid>{529A00DB-0C43-4F5B-8EF2-05004CBE0C6F}</guid>
   <osdname>AV Splitter</osdname>
  </filter>
<!-- Video -->
   <filter name="lavvideodec" type="videodec">
   <path>LAVVideo.ax</path>
   <guid>{EE30215D-164F-4A92-A4EB-9D4C13390F9F}</guid>
   <osdname>LAV Video Decoder</osdname>
  </filter>
  <filter name="mpcvideodec" type="videodec">
   <path>MPCVideoDec.ax</path>
   <guid>{008BAC12-FBAF-497B-9670-BC6F6FBAE2C4}</guid>
   <osdname>MPC Video Decoder</osdname>
  </filter>
<!-- Audio -->
  <filter name="lavaudiodec" type="audiodec">
   <path>LAVAudio.ax</path>
   <guid>{E8E73B6B-4CB3-44A4-BE99-4F7BCB96E491}</guid>
   <osdname>LAV Audio Decoder</osdname>
  </filter>  
<!-- Extra -->
  <filter name="ffdraw" type="extra">
   <guid>{0B390488-D80F-4A68-8408-48DC199F0E97}</guid>
   <osdname>FFdshow RAW</osdname>
  </filter>
</filters>
</filtersconfig>

mediaconfig.xml
Open Copy & Replace
Code:
<mediasconfig>
<rules>  
  <rule filetypes="avi|mkv|mp4|m4v|flv|mov|mpg|ts|mts|m2ts|bdmv|mpls">
   <source filter="avsource" />
   <splitter filter="avsource" />
   <video filter="lavvideodec" />  
   <audio filter="lavaudiodec" />
   </rule>
</rules>
</mediasconfig>

Go into Program Files/XBMC/system

playercorefactory.xml
Copy & Replace
Code:
<playercorefactory>
  <players>
    <!-- These are compiled-in as re-ordering them would break scripts
    The following aliases may also be used:
      audiodefaultplayer, videodefaultplayer, videodefaultdvdplayer
    <player name="DVDPlayer" audio="true" video="true" />
    <player name="DVDPlayer" /> placeholder for MPlayer
    <player name="PAPlayer" audio="true" />
    -->
  </players>

  <rules name="system rules">
    <rule name="rtv" protocols="rtv" player="DVDPlayer" />
    <rule name="hdhomerun/myth/rtmp/mms/udp" protocols="hdhomerun|myth|cmyth|rtmp|mms|mmsh|udp" player="DVDPlayer" />
    <rule name="lastfm/shout" protocols="lastfm|shout" player="PAPlayer" />

    <!-- dvdplayer can play standard rtsp streams -->
    <rule name="rtsp" protocols="rtsp" filetypes="!(rm|ra)"  player="PAPlayer" />

    <!-- Internet streams -->
    <rule name="streams" internetstream="true">
      <rule name="flv/aacp/sdp" mimetypes="video/x-flv|video-flv|audio/aacp|application/sdp" player="DVDPlayer" />
      <rule name="mp2" mimetypes="application/octet-stream" filetypes="mp2" player="PAPlayer" />
    </rule>

    <!-- DVDs -->
    <rule name="dvd" dvd="true" player="videodefaultdvdplayer" />
    <rule name="dvdfile" dvdfile="true" player="videodefaultdvdplayer" />
    <rule name="dvdimage" dvdimage="true" player="videodefaultdvdplayer" />

    <!-- Only dvdplayer can handle these normally -->
    <rule name="sdp/asf" filetypes="sdp|asf" player="DVDPlayer" />

    <!-- Pass these to dvdplayer as we do not know if they are audio or video -->
    <rule name="nsv" filetypes="nsv" player="DVDPlayer" />
  
     <!-- Youtube video -->
     <rule name="youtube" filename=".*youtube.*" player="DVDPlayer" />
    
     <!-- DSPlayer rules: set network streams to DVDPlayer -->
    <rule name="other" protocols="daap|rtv|rtsp|rtmp|http|https|rtmpe|rtsp|mms|rtp|pvr" player="DVDPlayer" />
  </rules>
  
</playercorefactory>

Then make sure you setup Windows HDMI audio

Thank you so much.

If i delete xbmc, will all my custom menus, movies and such be gone?

And with your xml files, will my receiver be encoding the audio?
HTPC: AMD A10-7850K - MSI A78M-E45 V2 - HyperX Genesis 8GB DDR3 1866Mhz - 120GB+240GB HyperX SSD + 86TB HGST HDD
Plasma: Panasonic TX-P65VT60 Receiver: Yamaha RX-A3020 Surround: Jamo S608, Jamo C60 Center + C60 Surround Subwoofer: XTZ W12.18 ICE
Kodi 14.2 w/Shednox v.3.0
Reply
Dp......
HTPC: AMD A10-7850K - MSI A78M-E45 V2 - HyperX Genesis 8GB DDR3 1866Mhz - 120GB+240GB HyperX SSD + 86TB HGST HDD
Plasma: Panasonic TX-P65VT60 Receiver: Yamaha RX-A3020 Surround: Jamo S608, Jamo C60 Center + C60 Surround Subwoofer: XTZ W12.18 ICE
Kodi 14.2 w/Shednox v.3.0
Reply
Not if you've installed XBMC DSPlayer from the first post already, just replace the xml files
Optoma HD Projector, Panasonic TX-P65VT65 Plasma, Pioneer SC2023 AVR, Kef Q65 main, iQ8ds rear, XQ2C centre, XBOX 360 Elite, Samsung LE40C650, SKY HD, Lutron Lighting, Crestron AV2 control

(Server)CPU - AMD Phenom ii 560, MB - M4A78LT-M, 32GB Corsair SSD, 4GB Corsair DDR3, 6x 1.5TB HDD's

XBMC Clients x2 (DSPlayer)
Reply
Quote:Thank you so much.

And with your xml files, will my receiver be encoding the audio?

My Pioneer AVR shows PCM untouched (my preference)
Which is in XBMC/System/Audio Output

Audio output device: Directsound
Passthrough output device: Directsound
Optoma HD Projector, Panasonic TX-P65VT65 Plasma, Pioneer SC2023 AVR, Kef Q65 main, iQ8ds rear, XQ2C centre, XBOX 360 Elite, Samsung LE40C650, SKY HD, Lutron Lighting, Crestron AV2 control

(Server)CPU - AMD Phenom ii 560, MB - M4A78LT-M, 32GB Corsair SSD, 4GB Corsair DDR3, 6x 1.5TB HDD's

XBMC Clients x2 (DSPlayer)
Reply
(2014-02-04, 09:06)Simkin84 Wrote: Thank you so much.

If i delete xbmc, will all my custom menus, movies and such be gone?

And with your xml files, will my receiver be encoding the audio?

If you have edited any of the xml files directly in the Programs (x86)/XBMC/ directory, those will be overwritten (which I doubt that you have done, reading your posts).

To ensure that your receiver DECODES the audio, you need to go into the settings for your audio codec (in this case LAV audio - Start - Programs - LAV Filters - LAV audio configuration).
Check off BitStreaming for any formats that your receiver is capable of decoding.
Reply
If u are afraid, u don't need to uninstall ur actual XBMC. Just do a portable installation of this build, i had it for long time that way, when Frodo came out. I had my normal Eden XBMC without DSPlayer and portable Frodo DSplayer build in portable mode, so i had both.
Just visit the wiki or forums and take proper note on how to install it this way, it's not complicated.
HTPC
Silverstone Grandia GD05 - Intel i5 3570k -Asus H61M-G Micro-ATX - Unidad Blu-ray
MSI GTX970 4GB GDDR5 - 8 GB RAM DDR3 - AVR Denon X3400H Atmos - LG  OLED 55C7V
Reply
  •   
  • 1
  • 34
  • 35
  • 36(current)
  • 37
  • 38
  • 95
  •   
 
Thread Rating:
  • 8 Vote(s) - 5 Average



Logout Mark Read Team Forum Stats Members Help
DSPlayer (DirectShow Player for XBMC) Frodo build available58