2014-03-24, 11:44
I wonder how I find out what "output" I use. I know from "lsusb" that I use bus 03 and address 02,
and
but I don't know how to find out the output, like, /dev/XXXXXXX .
Also, I need to say that I got my Lightpack with Boblight working, in some magic automatic way, but sometimes, after a cold reboot or something, it isn't working, and I think i need to specify in the .conf-file more info, to have it work every time.
How do I find that out? Is there some log I can check?
/Söder
Code:
OpenELEC:~ # lsusb
Bus 003 Device 002: ID 1d50:6022 OpenMoko, Inc.
Bus 004 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
and
Code:
(InitLog) start of log /storage/.boblight/boblightd.log
(PrintFlags) starting boblightd -c /storage/.xbmc/userdata/addon_data/service.multimedia.boblightd/boblight.conf
(CConfig::LoadConfigFromFile) opening /storage/.xbmc/userdata/addon_data/service.multimedia.boblightd/boblight.conf
(CConfig::CheckConfig) checking config lines
(CConfig::CheckConfig) config lines valid
(CConfig::BuildConfig) building config
(CConfig::BuildConfig) built config successfully
(main) starting devices
(CClientsHandler::Process) opening listening socket on *:19333
(CDevice::Process) LP1: starting
(CDevice::Process) LP1: setting up
(CDeviceLightpack::SetupDevice) LP1: found Lightpack at bus 3 address 2, serial is 8523033323035131B132
(CDeviceLightpack::SetupDevice) LP1: Lightpack is initialized, bus 3 device address 2
(CDevice::Process) LP1: setup succeeded
(CClientsHandler::Process) 127.0.0.1:47874 connected
(CClientsHandler::ParseMessage) 127.0.0.1:47874 said hello
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 128
(CClientsHandler::ParseSet) 127.0.0.1:47874 priority set to 255
but I don't know how to find out the output, like, /dev/XXXXXXX .
Also, I need to say that I got my Lightpack with Boblight working, in some magic automatic way, but sometimes, after a cold reboot or something, it isn't working, and I think i need to specify in the .conf-file more info, to have it work every time.
How do I find that out? Is there some log I can check?
/Söder