2009-05-15, 13:57
So I seem to have gotten -that- close but not quite there yet.
I've gotten everything compiled and up and running, there are just a few caveats from getting the whole thing to link together.
Firstly - with VDR, I've gone from 'No Signal' to somewhat of a signal but apparantly one that Xine has trouble dealing with, so I get output like this when running 'vdr-sxfe --video=xshm' (I have to use XShm because xineliboutput wasn't configured with xv at the time. Not sure if that makes much of a difference though).
The problem isn't the card or the channels.conf for that matter as they both work fine with kaffeine and MeTV
Secondly, with XBMC itself, I've got streamdev enabled and port 2004 is open, but it seems that XBMC can't connect to it, even though I've added my IP address in the streamdevhosts.conf file.
Thanks in advance for any advice.
- Sm
I've gotten everything compiled and up and running, there are just a few caveats from getting the whole thing to link together.
Firstly - with VDR, I've gone from 'No Signal' to somewhat of a signal but apparantly one that Xine has trouble dealing with, so I get output like this when running 'vdr-sxfe --video=xshm' (I have to use XShm because xineliboutput wasn't configured with xv at the time. Not sure if that makes much of a difference though).
The problem isn't the card or the channels.conf for that matter as they both work fine with kaffeine and MeTV
Code:
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 1132527208 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 356028493 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 948932760 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 1272348372 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 92401912 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 442421705 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 66658 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 2144070204 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 798144554 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 1157017174 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 1999380981 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 1638320297 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 498864829 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 1100687401 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 549609830 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 1193678857 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 1190005047 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 2040611861 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 70499 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 120553176 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 1321954730 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 656727208 bytes)
[16952] [input_vdr] TCP: Buffer too small (8192 ; incoming frame 606101353 bytes)
[16906] [input_vdr] Connections closed.
sam@Foxconn-U904:/var/log$ cat ~/vdrlog.log
vdr-sxfe 1.0.3 (build with xine-lib 1.1.90, using xine-lib 1.1.90)
Video driver: xshm
VDR server not given, searching ...
Found VDR server: host 192.168.2.4, port 37890
Press Esc to exit
Terminating...
Secondly, with XBMC itself, I've got streamdev enabled and port 2004 is open, but it seems that XBMC can't connect to it, even though I've added my IP address in the streamdevhosts.conf file.
Thanks in advance for any advice.
- Sm