2009-12-16, 13:19
jeepcook Wrote:Here is the capmt help from tvheadend svn 3827:
1 <div class="hts-doc-text">
2
3 Tvheadend support connecting to card clients via the capmt protocol for so called softcam descrambling.
4
5 <p>
6 <img src="docresources/configcapmt.png">
7
8 <p>
9 The servers are listed / edited in a grid.
10
11 <ul>
12 <li>To edit a cell, double click on it. After a cell is changed it
13 will flags one of its corner to red to indicated that it has been
14 changed. To commit these changes back to Tvheadend press the
15 'Save changes' button. In order to change a Checkbox cell you only
16 have to click once in it.
17
18 <li>To add a new entry, press the 'Add entry' button. The new (empty) entry
19 will be created on the server but will not be in its enabled state.
20 You can now change all the cells to the desired values, check the
21 'enable' box and then press 'Save changes' to activate the new entry.
22
23 <li>To delete one or more entries, select the lines (by clicking once on
24 them), and press the 'Delete selected' button. A pop up
25 will ask you to confirm your request.
26 </ul>
27
28 <p>
29 The columns have the following functions:
30
31 <dl>
32 <dt>Enabled
33 <dd>If selected, connection will be tried to be established and retained up.
34 If unselected, Tvheadend will disconnect (if connected) and not try to reconnect.
35
36 <dt>Camd.socket Filename
37 <dd>Socket filename which is usually opened by cam client. Tvheadend
38 tries to connect to this socket file.
39
40 <dt>Listenport
41 <dd>If running on a so called full-featured DVB-Card this can be left
42 empty.
43 Running on Budget-Cards one has to use a dummy ca-device. This is
44 emulated via capmt_ca.so. This module has to be pre-loaded prior to
45 the cam client.
46
47 LD_PRELOAD=/path/to/capmt_ca.so cam_client &
48
49 This module will communicate the received control-words back to
50 Tvheadend via Port 9000
51
52 <dt>Comment
53 <dd>Allows the administrator to set a comment only visible in this editor.
54 It does not serve any active purpose.
55 </dl>
56 </div>
Thanks been reading through that this morning.
Whats the
47 LD_PRELOAD=/path/to/capmt_ca.so cam_client
cant seem to find it is that an extra plugin??