Posts: 443
Joined: Dec 2010
Reputation:
13
I need Windows to use with DVBViewer. I only want a fanless motherboard with 5 SATA, I don't need HDMI or a lot of power. Maybe a ASRock AD2550R/U3S3 is a good idea, with 7 SATA+1 e-SATA and mini-itx (but too expensive, 160€).
Posts: 3,610
Joined: Feb 2009
Reputation:
87
2014-08-01, 20:58
(This post was last modified: 2014-08-01, 20:59 by Dougie Fresh.)
Nice find. I'd still put my boot drive on the motherboard's controller port 0 to avoid any potential issues.
Posts: 21
Joined: Feb 2005
2014-08-08, 17:02
(This post was last modified: 2014-08-08, 17:35 by User 9163.)
(2014-06-05, 22:56)sub0ptimal Wrote: I tried both the ASRock Q1900-ITX and the Q1900B-ITX in a new Antec 110 ISK case.
Neither boards would post. With no fans in the case or on the motherboard, I can't tell if the problem is electrical or physical. The power LED comes on, but there is no video output (tried VGA, HDMI, DVI)
I'm stumped. After many years of builds, this is the first time I haven't been able to troubleshoot the problem. Maybe power supply in the Antec case?
I have exactly this problem with the Q1900-ITX and have tried everything. Have 2 sticks of
this Crucial RAM so it can't be that unless they are both dead/incompatible. Anything else I can do?
EDIT: PSU is 80W Pico. Light is on. HDD clicks so is spinning. DVB-T2 PCI card is warm.
Thanks.
Posts: 528
Joined: Sep 2013
Reputation:
14
2014-08-08, 17:19
(This post was last modified: 2014-08-08, 17:25 by -DDD-.)
Maybe it's because the PSU isn't Haswell ready? I have an ISK110 and only Problems with H81 Asrock when i activate c6 States.
Posts: 21
Joined: Feb 2005
(2014-08-08, 17:19)-DDD- Wrote: Maybe it's because the PSU isn't Haswell ready? I have an ISK110 and only Problems with H81 Asrock when i activate c6 States.
Well it seems to power up in terms of HDD noise and heat. Standard Pico 80W PSU.
Posts: 446
Joined: Aug 2014
Reputation:
4
Try a different PSU (to test)? Does it do anything different if you try to power it up without any RAM?
Posts: 21
Joined: Feb 2005
2014-08-08, 18:05
(This post was last modified: 2014-08-08, 18:05 by User 9163.)
(2014-08-08, 17:45)Stereodude Wrote: Try a different PSU (to test)? Does it do anything different if you try to power it up without any RAM?
No joy with a different PSU although haven't tried it with VGA cable. No difference without RAM or 1 stick or either/both slot(s) etc.