2014-10-27, 17:11
@shadowghost: Can you upload a debug log (wiki) from build #1026 to pastebin? Enable debugging, then after you have tested your DVD, "cat /storage/.kodi/temp/kodi.log | pastebinit" and paste the url.
(2014-10-27, 17:03)shadowghost Wrote: 14:55:24 71.872520 T:2679239760 ERROR: Error getting next block: Encrypted or faulty DVD
14:55:24 71.873283 T:2679239760 WARNING: could not find codec parameters for smb://192.168.178.40/video/Video_VOBs/ActionFilme/Batman Begins (2005)/VIDEO_TS/VIDEO_TS.IFO
(2014-10-27, 18:47)shadowghost Wrote: @Milhouse: Here's the Debug Log: klick
@popcornmix: I will go through the builds since #1018 where I know it was working. And it isn't working with any DVD I#ve ripped (and I don't know which prog I used for the DVDs, that I used different is all I can say)
(2014-10-21, 22:17)Bohlendach Wrote: I have a iso-file, dvd-rip, with no menu. It does not start playing when it is located on my nfs or smb-share, but when I play it located on a USB-pin (ntfs) it starts playing. Others iso plays smoothly.
The log-file can be downloaded here
Edit: Build #1018 plays it, #1019 to 1023 does not.
Edit:
I did a random check on my iso's.
build #1019 to 1023: Some but not all with no menus does not start playing. All of those I checked with menus played well.
Build #1018: all seems to play fine
(2014-10-27, 15:20)Milhouse Wrote:Also, for what its worth, I have long had the CEC disconnecting issue with my LG, and I believe it is not a single issue.(2014-10-27, 14:26)denz Wrote: Unfortunately entering additional config settings the pi still doesn't respond after being unused for period of time. I Have also plugged in mce remote and even that doesn't bring it from what it looks like sleep. Unplugging and plugging into different hdmi port makes no difference. If anyone has some suggestions they will be more than welcomed. I will continue with updating to new builds hopefully one of them will fix it.
Do you have a debug log? Once the Pi stops responding to the remote, does it still respond to ping/ssh? Even if not, if you restart the Pi the previous debug log should be in /storage/.kodi/temp/kodi.old.log. Obviously if the Pi is accessible via ssh then upload the current log (/storage/.kodi/temp/kodi.log). If it's too large for pastebin, you may need to upload it to somewhere like dropbox.
(2014-10-27, 19:27)shadowghost Wrote:(2014-10-21, 22:17)Bohlendach Wrote: build #1019 to 1023: Some but not all with no menus does not start playing. All of those I checked with menus played well.
Build #1018: all seems to play fine
For me the DVDs with menu aren't playing (no-menu I can't check because I have no)
Program received signal SIGSEGV, Segmentation fault.
[Switching to LWP 4268]
0xaa95f83c in ?? () from /usr/lib/kodi/system/players/dvdplayer/libdvdnav-arm.so
(gdb) bt
#-1 0xaa95f83c in ?? () from /usr/lib/kodi/system/players/dvdplayer/libdvdnav-arm.so
Backtrace stopped: Cannot access memory at address 0x63677020
# uname -a
Linux rpi512 3.17.1 #1 PREEMPT Mon Oct 27 23:25:02 GMT 2014 armv6l GNU/Linux
# vcgencmd version
Oct 17 2014 17:56:05
Copyright (c) 2012 Broadcom
version 845092531e360acd37f2f1964157f8079c77edfb (clean) (release)
# lsb_release
OpenELEC (Milhouse) - Version: devel-20141027232349-r19478-g4b97acf [Build #1027]
(2014-10-28, 02:05)Milhouse Wrote: New OpenELEC Helix build: #1027
(Supercedes previous build)
Build Highlights:
Reverts PR:5534 as this seems to be the cause of problems playing DVD ISO/IFO over SMB - please test/confirm etc.
# uname -a
Linux rpi512 3.17.1 #1 PREEMPT Mon Oct 27 23:25:02 GMT 2014 armv6l GNU/Linux
# vcgencmd version
Oct 17 2014 17:56:05
Copyright (c) 2012 Broadcom
version 845092531e360acd37f2f1964157f8079c77edfb (clean) (release)
# lsb_release
OpenELEC (Milhouse) - Version: devel-20141027232349-r19478-g4b97acf [Build #1027]