[shadowghost]

Since Build #0117 every time I unplug my rpi and replug the cable, system falls in debug shell. It says that the fs couldn't be repaird automatically and I must run fsck by myselfe. fsck corrects the fs and system boots. Can repeat the "error" every time if needed.

[Milhouse]

Nothing different in #0117 with respect to system startup... suspect your SD card has finally had enough of the power being yanked.

[shadowghost]

Hmm the point is, that with #0116 there is no problem, when I unplug and replug the power. Only #0117 has the issue with corrupt fs for me.

[Milhouse]

Don't know if the new kernel could account for the new behaviour, perhaps if it were now a bit more finicky with certain file systems? Try fsck'ing your SD card in a Linux PC.

[pootler]

It is seen in these latest builds, but for some reason, these latest builds have ( for me ) a really really slow channel change which makes it difficult to use.
Also ( I am using VDR ), w_scan does not seem to find HD channels.

If the channel switch time got slower 21 days ago, then it's probably this:
https://github.com/xbmc/xbmc/pull/6036

Note this needs a fix to report the correct mime type in the PVR add-on, so best report the issue in the PVR add-on thread.

Hi popcornimx

heres a reply from fernetmenta:


VNSI has its own demuxer and is certainly not affected by the linked PR.

Maybe the problem is elsewhere?

thanks

pootler

[popcornmix]

Maybe the problem is elsewhere?

If you can identify the last Milhouse build that had fast channel switching speed then we might be able to track it down.

[FernetMenta]

a debug log may also shed some light on it

[shadowghost]

Don't know if the new kernel could account for the new behaviour, perhaps if it were now a bit more finicky with certain file systems? Try fsck'ing your SD card in a Linux PC.

Will test it tomorrow evening and report.

[Milhouse]

New OpenELEC I****** build: #0118
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 3.18.3 #1 PREEMPT Mon Jan 19 05:54:49 GMT 2015 armv6l GNU/Linux

# vcgencmd version
Jan 14 2015 19:51:39
Copyright (c) 2012 Broadcom
version 83418eb035b8cb762e7d1bf5fb10c09ecf258a04 (clean) (release)

# lsb_release
OpenELEC (Milhouse) - Version: devel-20150119055404-r20059-gb0da905 [Build #0118]

# vcdbg log msg 2>&1 | grep DTOK
001586.309: Kernel trailer DTOK property says yes

# Kernel device tree status: Enabled

Based on tip of OpenELEC master (b0da9058, changelog) and tip of XBMC master (c16ccb32, changelog) with the following modifications:

• Includes newclock4 patches
  
• Excludes the OpenELEC fernetmenta patches due to conflicts with newclock4
  
• Excludes the OpenELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-3.18.y
  
• Excludes the OpenELEC kodi-001-helix_rpb_backports patch in favour of sourcing these and possibly more recent patches directly from newclock4 branch
  
• Default setting for "Show RSS Feed" changed to disabled (new installs only) [patch details]
  
• Disabled "Total Duration" in Confluence (see build #0221 for details)
  
• Adapted service.openelec.settings to take advantage of PR:5217 [patch details]
  
• Includes latest libnfs master (8e991ffb)
  
• Includes latest libcec master (9f000e43)
  
• Includes latest xbmc-pvr-addons master (ce70914a)
  
• Includes latest xbmc-addon-xvdr master (6ba17254)
  
• Includes additional ffmpeg codecs/muxers enabled for testing/benchmarking purposes (see patch)
  
• Includes animated splash support (patch)
  
• Includes commits from libcec-2.2.0 (popcornmix)
  
• Exclude kodi-102-dont_really_depend_on_SDL_image.patch: No longer required
  
• Exclude lirc_rpi.conf: No longer required, let Device Tree handle lirc_rpi (add "dtoverlay=lirc-rpi" to config.txt)
  
• Include d6f4bebf: new package: libsquish
  
• Include patch: Use our own texturepacker
  
• Include patch: Enable kernel device-tree support (details)
  
• Include patch: Fix build patch for kodi-pvr-addons
  
• Include patch: Add *.dtb files to firmware
  
• Include patch: Add device tree kernel trailer
  
• Include PR:5430: [URIUtils] Fix IsSmb, IsFTP, IsAfp, IsDAV and IsNfs.
  
• Include PR:5752: [jsonrpc] Allow retrieving empty TV shows via VideoLibrary.GetTVShows.
  
• Include PR:5958: Fix state not saved after #5842 if playing from "Recently added".
  
• Include PR:6201: webserver: refactor, unification of handlers and bug fixes
  

Build Highlights:

1. Excluded latest 18 Jan firmware due to kernel panics (possibly overclock/over_voltage related)
   
2. Excluded commit "[rbp] Enable error concealment by default" (6f21576d) due to dependency on latest 18 Jan firmware
   
3. sqlite updated to release 3.8.8
   
4. libnfs updated
   
5. Various systemd ordering fixes (see PR:3811 for additional details)
   

Build Details:

1. OpenELEC:
   • projects/WeTek_Play/patches/kodi: Update patches for latest Kodi Helix (PR:3807, 1 commit, 16 files changed)
     
   • made the docu and the osd files accessible and allowed to use the option... (PR:3806, 1 commit, 7 files changed)
     
   • ffmpeg: update to ffmpeg-2.4.6 (PR:3804, 1 commit, 19 files changed)
     
   • Mesa: update to Mesa-10.4.2 (d0bf8493)
     
   • sqlite: update to sqlite-autoconf-3080800 (80fae5a0)
     
   • bison: update to bison-3.0.3 (c071cae5)
     
   • cm-online: cosmetics (0ecef501)
     
   • vdr-addon: cosmetics (f4c40cfa)
     
   • kodi: remove kodi-rebrand (673fcfd4)
     
   • kodi: merge kodi-hacks/kodi-sources into kodi-config (dfd56dec)
     
   • kodi-cleanlogs has no job in sysinit.target (35226d62)
     
   • kodi-waitonnetwork: start late (bb682878)
     
   • connman: dont depend on debugconfig.service (343eab79)
     
   • debugconfig: run after systemd-tmpfiles-setup (0821b900)
     
   • userconfig: run after systemd-tmpfiles-setup (802a8e7c)
     
   • var-log-debug: do not order before systemd-tmpfiles-setup (ed900154)
     
   • wetek_play: fix power button (8245cdf3)
     
2. XBMC:
   • Fix videodb SQL (PR:6218, 1 commit, 1 file changed)
     
3. libnfs:
   • opendir_cb: Retrieve attributes for a top-level submount correctly (PR:105, 1 commit, 1 file changed)
     
4. newclock4:
   • New commits in this build:
     • videodb: (temporarily) trim actor names in AddActor (73ca2916)
       
   • Commits no longer in build:
     • Fix remaining issues with PR6020 (c06bac74)
       

[mezo]

hey,
i have a short question. does your openelec builds support controller? ive seen u added sdl2 in this post http://forum.kodi.tv/showthread.php?tid=192380&page=126 and also build kodi with that.

[Milhouse]

Not sure what sort of controller you are referring to, but these builds have the same "controller" support you will find in upstream OpenELEC master.

[mezo]

Not sure what sort of controller you are referring to, but these builds have the same "controller" support you will find in upstream OpenELEC master.

xbox 360 wired controller.

[Milhouse]

New OpenELEC I****** build: #0119
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 3.18.3 #1 PREEMPT Mon Jan 19 21:01:39 GMT 2015 armv6l GNU/Linux

# vcgencmd version
Jan 19 2015 15:16:25
Copyright (c) 2012 Broadcom
version 311c3a0e203a277aa03b55c0b9c3b3099d28a77b (clean) (release)

# lsb_release
OpenELEC (Milhouse) - Version: devel-20150119210057-r20072-gc30cb05 [Build #0119]

# vcdbg log msg 2>&1 | grep DTOK
001585.560: Kernel trailer DTOK property says yes

# Kernel device tree status: Enabled

Based on tip of OpenELEC master (c30cb058, changelog) and tip of XBMC master (c8dce7f0, changelog) with the following modifications:

• Includes newclock4 patches
  
• Excludes the OpenELEC fernetmenta patches due to conflicts with newclock4
  
• Excludes the OpenELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-3.18.y
  
• Excludes the OpenELEC kodi-001-helix_rpb_backports patch in favour of sourcing these and possibly more recent patches directly from newclock4 branch
  
• Default setting for "Show RSS Feed" changed to disabled (new installs only) [patch details]
  
• Disabled "Total Duration" in Confluence (see build #0221 for details)
  
• Adapted service.openelec.settings to take advantage of PR:5217 [patch details]
  
• Includes latest libnfs master (8e991ffb)
  
• Includes latest libcec master (9f000e43)
  
• Includes latest xbmc-pvr-addons master (b79c07fd)
  
• Includes latest xbmc-addon-xvdr master (6ba17254)
  
• Includes additional ffmpeg codecs/muxers enabled for testing/benchmarking purposes (see patch)
  
• Includes animated splash support (patch)
  
• Includes commits from libcec-2.2.0 (popcornmix)
  
• Exclude kodi-102-dont_really_depend_on_SDL_image.patch: No longer required
  
• Exclude lirc_rpi.conf: No longer required, let Device Tree handle lirc_rpi (add "dtoverlay=lirc-rpi" to config.txt)
  
• Include d6f4bebf: new package: libsquish
  
• Include patch: Use our own texturepacker
  
• Include patch: Enable kernel device-tree support (details)
  
• Include patch: Fix build patch for kodi-pvr-addons
  
• Include patch: Add *.dtb files to firmware
  
• Include patch: Add device tree kernel trailer
  
• Include PR:5430: [URIUtils] Fix IsSmb, IsFTP, IsAfp, IsDAV and IsNfs.
  
• Include PR:5752: [jsonrpc] Allow retrieving empty TV shows via VideoLibrary.GetTVShows.
  
• Include PR:6201: webserver: refactor, unification of handlers and bug fixes
  

Build Highlights:

1. Updated firmware, with voltage fix
   
2. No longer exlcuding "[rbp] Enable error concealment by default" (6f21576d)
   

Build Details:

1. Firmware (Jan 19):
   • firmware: Fix for over_voltage_sdram breakage in last update
     
   • firmware: vdec3: Initial support for parsing SEI recovery points See: link
     
   • firmware: vdec3: make use of SEI pic_struct. See: link
     
   • firmware: power: internally switch to microvolts as the unit of voltage
     
2. OpenELEC:
   • vdr: update vdr-2.1.7 (PR:3816, 2 commits, 3 files changed)
     
   • fs-resize: move as systemd target (PR:3814, 4 commits, 10 files changed)
     
   • busybox: add /storage/.config to tmpfiles (50b84c5c)
     
   • vdr: remove old patch. closes #3817 (7c2fcdc2)
     
   • init: forgot fs-resize in 208d45d (01a0d5fc)
     
   • nss-mdns: mdns_minimal is enough (19714b13)
     
   • buildsys: force package rebuild on $PKG_DIR/config/* change (c30cb058)
     
3. XBMC:
   • Fix state not saved after #5842 if playing from "Recently added". (PR:5958, 1 commit, 1 file changed)
     
   • improve error handling of stacked items (c8dce7f0)
     
4. kodi-pvr-addons:
   • Fix Windows build (PR:413, 1 commit, 1 file changed)
     
   • [pvr.wmc] 0.4.001 for Kodi v15 (PR:412, 1 commit, 4 files changed)
     
5. kernel 3.18.y:
   • New commits in this build:
     • Adding w1-gpio device tree overlays (8e70844d)
       

[illiac4]

Hi. A few builds back the gpio ir sensor was working good with normal RC6 remote. Now when using it, one key-press causes two presses so it can not be used. The good news is that gpio was not working on RPI+ (build 14. dec) but on jan 19 build one works but causes two key-presses on both RPI models (+ and older one with 512mb ram).

[PhilE]

Are these repeating keys? On most remotes, some keys repeat and some don't. Play/Pause usually doesn't repeat, so it is worth trying that.

If you use "irw" you will see the repeat count incrementing. It is possible to limit the repeats in the lirc configuration file. See here (http://wiki.openelec.tv/index.php?title=...O_Receiver) for details.