[Milhouse]

Another question,
I do not get the right time opposed.
Time server time.fu-berlin.de
Time is too late two hours.
Really time is 10 o'clock. 8 o'clock is indicated.

In the GUI? Set your correct timezone in Kodi (Settings > Appearance > International).

Please note this thread is not a general OpenELEC support thread...

[Capslock]

Hello guys,

I'm justing testing my new rPi2 with the OpeneElec 5.95.1 version.
I have watched two movies, and once per movie, after an hour maybe, the image has gone away and the came back.
The first time I thought that it was the movie which is bad encoded, but it happened again.
I am reading my movies through the network. The rPI is connected to my Amplifier.

Is it a bug or a bad configuration of OE/Kodi ?

Please ask if you want more information. Thanks for your help.

PS : sorry for my bad english

[popcornmix]

I'm justing testing my new rPi2 with the OpeneElec 5.95.1 version.
I have watched two movies, and once per movie, after an hour maybe, the image has gone away and the came back.

This thread is for Milhouse nightly builds, so the question is better asked in a separate thread.
Try here for suggestions: http://kodi.wiki/view/Raspberry_Pi_FAQ#A...ts_on_HDMI

[Azimono]

There is a link to a tutorial, as I 3D MVC MKVs from Blu-rays can create?

The time I finally set correctly but can ...

[robnix]

There is a link to a tutorial, as I 3D MVC MKVs from Blu-rays can create?

The time I finally set correctly but can ...

The easiest way to make 3D MVC MKV files is with MakeMKV.

http://www.makemkv.com/

[Azimono]

There is a link to a tutorial, as I 3D MVC MKVs from Blu-rays can create?

The time I finally set correctly but can ...

The easiest way to make 3D MVC MKV files is with MakeMKV.

http://www.makemkv.com/

I have this.
I have also provided from a 3D Blu-ray a 3D MKV, but Kodi 15 shows it still only in 2D.

Therefore, a Tutorial would be good, so that I can exclude mistake.

[noggin]

There is a link to a tutorial, as I 3D MVC MKVs from Blu-rays can create?

The time I finally set correctly but can ...

The easiest way to make 3D MVC MKV files is with MakeMKV.

http://www.makemkv.com/

I have this.
I have also provided from a 3D Blu-ray a 3D MKV, but Kodi 15 shows it still only in 2D.

Therefore, a Tutorial would be good, so that I can exclude mistake.

Did you tick the additional MVC stream when extracting in MakeMKV (it is not enabled by default)?
Did you name the resulting mov file with a 3D.SBS.mkv extension or similar (even though it isn't SBS Kodi needs to know it is a 3D format it can handle)?
Did you enable MVC playback and Frame Packed output in Acceleration settings (you need Expert or poss Advanced settings to be enabled to see these options)

[satadru]

FYI this last build (June 6th) broke using my remote control.

Clicking on things with the remote was hit or miss.

Reverted to the June 5th build and everything works ok.

[Milhouse]

FYI this last build (June 6th) broke using my remote control.

Clicking on things with the remote was hit or miss.

Reverted to the June 5th build and everything works ok.

There's very little in #0606 that could explain this change of behaviour. Maybe if described your remote (GPIO? IR USB? CEC or non-CEC?), or provided a debug log (wiki), it might be possible to consider this further. I test with IR USB (Hama VRC-1100) and that's working fine.

[gendo]

Hi i use multiple PVR backends and most time PVR only displays channels from one backend (sometimes it is two). I believe that i'm encountering the issue mentioned here https://github.com/xbmc/xbmc/pull/7020 could you kindly add this pr to your next build so that i can confirm whether it is a fix or not.

[Milhouse]

I'll add it in the next build (hopefully in a couple of hours), but if it blows up and causes problems it will be dropped and I'll probably never add it again until it is merged (if it is ever merged).

[gendo]

I'll add it in the next build (hopefully in a couple of hours), but if it blows up and causes problems it will be dropped and I'll probably never add it again until it is merged (if it is ever merged).

thanks one build is enough as i can then send feedback on whether it solves issue or not.

[Milhouse]

New OpenELEC Isengard build #0607: RPi / RPi2
(Supercedes previous build)

Code:

# uname -a
Linux rpi512 4.0.5 #1 Mon Jun 8 09:40:42 BST 2015 armv6l GNU/Linux

# vcgencmd version
Jun  7 2015 13:07:57
Copyright (c) 2012 Broadcom
version c3c18c87022ca254ba323503eda476e59173f7ec (clean) (release)

# lsb_release
OpenELEC (Milhouse) - Version: devel-20150608093951-#0607-gfaf29e7 [Build #0607]

# vcdbg log msg 2>&1 | grep DTOK
001565.473: Kernel trailer DTOK property says yes

# Kernel device tree status: Enabled

Based on tip of OpenELEC master (faf29e7c, changelog) and tip of XBMC master (9b86184a, changelog) with the following modifications:

• Includes newclock4 patches
  
• Excludes the OpenELEC fernetmenta patches due to conflicts with newclock4
  
• Excludes the OpenELEC linux-01-RPi_support patch in favour of sourcing these and possibly more recent patches directly from kernel branch rpi-4.0.y
  
• Default setting for "Show RSS Feed" changed to disabled (new installs only) [patch details]
  
• Disabled "Total Duration" in Confluence (see build #0221 for details)
  
• Includes latest dcadec master (2a9186e3, ahead +34)
  
• Includes latest kodi-platform master (33b6390b, ahead +1)
  
• Includes latest libcec master (18555911, ahead +5)
  
• Includes latest libnfs master (68b02981, ahead +16)
  
• Includes latest platform master (aafa6e9f)
  
• Includes latest addons: pvr.argustv (cffc8b6b, +1), pvr.demo (9c400e19, +1), pvr.dvblink (7f515436), pvr.dvbviewer (05e76da7, +1), pvr.filmon (8c02f43d), pvr.hts (2f9a4d39, +2), pvr.iptvsimple (191972cf, +1), pvr.mediaportal.tvserver (bcfb46f9, +1), pvr.mythtv (6fb769da, +1), pvr.nextpvr (74168dc9, +1), pvr.njoy (9aa05103, +1), pvr.pctv (804dc37c, +1), pvr.stalker (0d6a5d8b, +1), pvr.vbox (375eab31), pvr.vdr.vnsi (244b893c), pvr.vuplus (cdc1d0e3, +2), pvr.wmc (42fb669d, +1)
  
• Includes commits from shairplay/master, ahead +17 (juhovh)
  
• Exclude kodi-999.20-PR7102.patch: Temporarily revert dcadec settings and use newclock4 version
  
• Exclude kodi-999.21-configure.ac-dont-break-if-dcadec-is-missing-dcadec-.patch: Temporarily revert due to breakage
  
• Include patch: Enable vcsm kernel options for HEVC optimisations
  
• Include patch: Bump to kernel 4.0.5 - copy of 4.0.4 until upstream sync
  
• Include patch: Add experimental splash video
  
• Include patch: Add ffmpeg dependency and includes for HEVC optimisations
  
• Include patch: Enable pvr addons
  
• Include PR:11: 2.2.1 (pvr.mythtv)
  
• Include PR:4176: [RBP] A collection of pending RPi fixes (mkknlimg, SPI as modules, mailbox config, overlays folder, hwrng/watchdog)
  
• Include PR:4186: libcec: build python wrapper
  
• Include PR:6732: [pvr] fixed crash when multiple add-on instances get registered
  
• Include PR:6919: added: also hide thumbs for unwatched episodes if option to show plot is off
  
• Include PR:7020: [pvr] finally make it possible to use multiple PVR clients (r=1045)
  
• Include PR:7048: videodb: Don't allow column value length to exceed key size of unique index
  
• Include PR:7093: [AirTunes] - features
  

Build Highlights:

1. New firmware
   
2. New kernel 4.0.5
   
3. Bump pvr.mythtv addon to 2.2.1
   
4. Make it possible to use multiple PVR clients
   

Build Details:

1. Firmware (Jun 7):
   • firmware: dtoverlay: Make most errors non-fatal
     
   • firmware: board_info: Use the boardrev after correction. See: link
     
   • firmware: audioserv: Force volume to full when in passthrough mode. See: link
     
2. XBMC:
   • [videodb] Add missing argument on JSON filter PrepareSQL() (PR:7237, 1 commit, 1 file changed)
     
   • FIX: [aml;droid] only bother with REALVIDEO intent if the permissions are right (PR:7241, 1 commit, 1 file changed)
     
   • [PVR] Fix crash in PVR::CPVRClient::GetDriveSpace, take two (Trac #15942) (PR:7239, 1 commit, 1 file changed)
     
   • [Confluence] add new pvr infolabels (PR:7209, 1 commit, 3 files changed)
     
3. newclock4:
   • New commits in this build:
     • change bool setting "pause playback on changing source" into tristate option with possible settings: 1. do nothing (as was before) 2. pause playback (as was bef (98a5c8e7)
       
   • Commits no longer in build:
     • [rbp] squash: Fix cachemembuffersize initialisation (2857dd68)
       
     • [ffmpeg] squash: Improved hevc acceleration. Requires updated firmware (98fe96c4)
       
     • [ffmpeg] squash: Added support for running luma prediction on QPUs (ad655d59)
       
     • [ffmpeg] squash: merge in Neon SAO optimisations from OpenHEVC (41b1dc15)
       
     • [ffmpeg] squash: hack: increase picture buffer allocation size to avoid corruption issue (a8d2c2aa)
       
     • [ffmpeg] squash: Proper fix for corruption with luma prediction on QPUs (96d131c2)
       
     • [ffmpeg] squash: Support skipping non-reference frames when running behind (bc652f9e)
       
     • [ffmpeg] squash: Option to parallelise coefficient decode and inter prediction and deblock for each frame and fix for cache flushing (c3ee33cc)
       
     • [ffmpeg] squash: Support tiled decode (8ed8de5e)
       
4. kernel 4.0.y:
   • New commits in this build:
     • BCM270X_DT: Enable 'make clean' on overlays directory (24d8164a)
       
     • hwmon: Remove bcm2835-hwmon (2b53c727)
       
     • BCM270x: Make uart1 work with Device Tree (a4573f4e)
       
     • fixup: BCM2709: Remove unused clock implementation (31c0f40b)
       
     • BCM270x: Remove bcm2708_systemtimer and bcm2708_powerman (6ae9c7a9)
       
   • Commits no longer in build:
     • squash: Fix up the mmc overlay (14661407)
       
5. Additional commits/pull requests/changes not yet merged upstream:
   • Added: patch: Bump to kernel 4.0.5 - copy of 4.0.4 until upstream sync
     
   • Added: PR:11: 2.2.1 (pvr.mythtv)
     
   • Added: PR:7020: [pvr] finally make it possible to use multiple PVR clients (r=1045)
     

[Azimono]

The easiest way to make 3D MVC MKV files is with MakeMKV.

http://www.makemkv.com/

I have this.
I have also provided from a 3D Blu-ray a 3D MKV, but Kodi 15 shows it still only in 2D.

Therefore, a Tutorial would be good, so that I can exclude mistake.

Did you tick the additional MVC stream when extracting in MakeMKV (it is not enabled by default)?
Did you name the resulting mov file with a 3D.SBS.mkv extension or similar (even though it isn't SBS Kodi needs to know it is a 3D format it can handle)?
Did you enable MVC playback and Frame Packed output in Acceleration settings (you need Expert or poss Advanced settings to be enabled to see these options)

Yes, I have it all set.

The Title is:

Test.3D.SBS.mkv

The movie starts.
The screen will now to to SBS.
But the movie (MVC) running anyway in 2D.
It can be seen no 3D effect.

I have set everything as you wrote it.


Meanwhile, I'm desperate.

The mkv includes but 3D ....

PHP Code:

Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format-Profil                            : Stereo High@L4.1 / High@L4.1
MultiView_Count                          : 2
Format-Einstellungen für CABAC           : Ja
Format-Einstellungen für ReFrames        : 3 frames
Format_Settings_GOP                      : M=1, N=12
Codec-ID                                 : V_MPEG4/ISO/AVC
Dauer                                    : 1h 32min
Bitraten-Modus                           : variabel
Bitrate                                  : 41,5 Mbps
maximale Bitrate                         : 34,0 Mbps
Breite                                   : 1 920 Pixel
Höhe                                     : 1 080 Pixel
Bildseitenverhältnis                     : 16:9
Modus der Bildwiederholungsrate          : konstant
Bildwiederholungsrate                    : 23,976 FPS 


The new build of today is also installed.

[querty1000]

But the movie (MVC) running anyway in 2D.
It can be seen no 3D effect.

I have set everything as you wrote it.


Meanwhile, I'm desperate.

The mkv includes but 3D ....

I'm not shure, if this
hdmi_force_edid_3d=1
in the config.txt is needed anymore. Maybe the TV says to the RPI that he can't do 3D.