[Oshan Ruiz]

Hope I'm not backtracking too much, But here is a few things I noticed using: (OpenELEC) build Updated: 15/09/06 with update applied and the instructions on the first pages.

Under the following setup instructions:
System ->Video->Acceleration:
Adjust Refreshrate to match video: On

I don't have "Adjust Refreshrate to match video: On" as a available setting.

Is this a critical setting?

In addition under "While watching a SD(!) video, click the film role and choose:"
Under Deinterlacing-Method I don't have "VAAPI-MCDI or VAAPI-MADI" because I have haswell processor.
I chose auto select, I assume this is the best choice in this case?

>This Lanczos3 Optimized filter might be too heavy for BYTs,
Forgive my ignorance, What is a BYT?



So happy I found this thread and build!

[john.cord]

Check Settings Level. Should be set to Expert!

--> http://kodi.wiki/view/Settings#Settings_levels

BYTs is Baytrails i assume

[Oshan Ruiz]

Check Settings Level. Should be set to Expert!

--> http://kodi.wiki/view/Settings#Settings_levels

BYTs is Bay trails i assume

Yes, Settings are at expert level. Not an option for me.

Baytrail, AH Ha!

Thanks!

[john.cord]

Sync Playback to Display is under Settings -> Video -> Playback and not in Hardware.

[Oshan Ruiz]

Sync Playback to Display is under Settings -> Video -> Playback and not in Hardware.

Ok, I assume that is the same as "Adjust Refreshrate to match video: On"?

[john.cord]

Nope. Read the Wiki. http://kodi.wiki/view/Settings/Videos#Playback

[Oshan Ruiz]

Nope. Read the Wiki. http://kodi.wiki/view/Settings/Videos#Playback

Ok, Sorry if I'm confused.
My question or concern is the fact that I don't have "Adjust Refreshrate to match video: On" as a available setting. in my build.
And if this is a critical setting.

[john.cord]

As i told you before: You looked in the Wrong Menu. It is under Playback and Not Acceleration.

[Oshan Ruiz]

Ok, Thanks!

[Matt Devo]

fritsch sorry if tis been asked before but 1080/24p videos have out of sync audio with the latest (13/9) openelec builds you posted. Does that have to do with that am on a chromebox not powerful enough for 4k? I dont think so. Any help please? Thanks

The Chromebox is absolutely powerful enough for 4k output, as long as it's h.264 encoded.

[fritsch]

Nope. Read the Wiki. http://kodi.wiki/view/Settings/Videos#Playback

Ok, Sorry if I'm confused.
My question or concern is the fact that I don't have "Adjust Refreshrate to match video: On" as a available setting. in my build.
And if this is a critical setting.

On makes no sense ... On Start / Stop ist a much better setting. Post your Debug Log, please. Also all with A/V sync issues - we need to see Debug Log - everything else is pure speculation.

[fritsch]

Hope I'm not backtracking too much, But here is a few things I noticed using: (OpenELEC) build Updated: 15/09/06 with update applied and the instructions on the first pages.

Under the following setup instructions:
System ->Video->Acceleration:
Adjust Refreshrate to match video: On

I don't have "Adjust Refreshrate to match video: On" as a available setting.

Is this a critical setting?

In addition under "While watching a SD(!) video, click the film role and choose:"
Under Deinterlacing-Method I don't have "VAAPI-MCDI or VAAPI-MADI" because I have haswell processor.
I chose auto select, I assume this is the best choice in this case?

>This Lanczos3 Optimized filter might be too heavy for BYTs,
Forgive my ignorance, What is a BYT?



So happy I found this thread and build!

You are in Video -> Acceleration. That setting is under Video -> Playback. Use "On Start / Stop" - On makes not much sense ...

Also Auto Deinterlacing will default to a OpenGL Shader approach. For your Sandybridge Try VAAPI-MCDI here - basically do exactly what I have written on the first page ...

[Klojum]

Hope I'm not backtracking too much, But here is a few things I noticed using: (OpenELEC) build Updated: 15/09/06 with update applied and the instructions on the first pages.

FYI, just to make life easier, press the PrtScn button on the keyboard if you can when you want a screendump of an OpenELEC screen. The file(s) will be stored in the Screenshots folder, which you can subsequently easily upload. No need for phones or cameras as a go-between. :-)

[gurabli]

Under the following setup instructions:
System ->Video->Acceleration:
Adjust Refreshrate to match video: On

I don't have "Adjust Refreshrate to match video: On" as a available setting.

In addition under "While watching a SD(!) video, click the film role and choose:"
Under Deinterlacing-Method I don't have "VAAPI-MCDI or VAAPI-MADI" because I have haswell processor.
I chose auto select, I assume this is the best choice in this case?

i installed Ubuntu Server on N3150 yesterday evening, used the ppa, and I also don't have VAAPI-MCDI or VAAPI-MADI under deinterlacing type when watching an SD video.
I will be able to post logs this evening (at work now), I wanted to do so yesterday evening, but I had no time to investigate further, so I thought at first that I was doing something wrong. But it looks others have this issue too.

[Roby77]

In my case motion compensated is not selectable for all sd content

i tried several sd content in my library before find one to set motion compensated

later i will post mediainfo of two files