Login at Kodi Home

Milhouse · (This post was last modified: 2018-11-24, 02:54 by Milhouse.)

(2018-11-24, 02:43)Luck Wrote: Good evening, I have a problem with the beta. If I watch iptv and after a few hours watching a movie by emby, LibreELEC responds very slowly and the RAM is consumed up to about 50mb. Either it freezes or it restarts. I have the problem at least once a day. The problem exists even if I watch iptv in the morning and would like to keep watching in the evening. Then I have the problem too. Why is that? Do you have an idea? Very sorry for my Bad English

Test with a clean .kodi installation, without any additional third-party addons installed - do you still have the problem? If you don't have this problem with only the addons provided with this build then it's likely an issue with your third party addons (Emby etc.).

Can you tell when this issue started? How long have you been using these test builds - is this a new problem? Or are you a new user?

You can run bcmstat.sh -ZAD -d30 which will monitor memory usage and help confirm if memory is being "leaked". You should also post the link to journalctl -a | pastebinit to see if Kodi is being killed by the OOM process killer.

agentxan · (This post was last modified: 2018-11-24, 06:08 by agentxan.)

(2018-11-24, 02:52)Milhouse Wrote:
(2018-11-24, 02:43)Luck Wrote: Good evening, I have a problem with the beta. If I watch iptv and after a few hours watching a movie by emby, LibreELEC responds very slowly and the RAM is consumed up to about 50mb. Either it freezes or it restarts. I have the problem at least once a day. The problem exists even if I watch iptv in the morning and would like to keep watching in the evening. Then I have the problem too. Why is that? Do you have an idea? Very sorry for my Bad English

Test with a clean .kodi installation, without any additional third-party addons installed - do you still have the problem? If you don't have this problem with only the addons provided with this build then it's likely an issue with your third party addons (Emby etc.).

Can you tell when this issue started? How long have you been using these test builds - is this a new problem? Or are you a new user?

You can run bcmstat.sh -ZAD -d30 which will monitor memory usage and help confirm if memory is being "leaked". You should also post the link to journalctl -a | pastebinit to see if Kodi is being killed by the OOM process killer.

This sounds something like what I reported before here https://forum.kodi.tv/showthread.php?tid...pid2757921
I use emby but for that test i started with a fresh install and scanned in all the movies and tv shows using kodi's own scrapper. After everything was scanned in just the act of playing movies and tvshows over several hours causes kodi to freeze when the free memorey get to around 50 to 60. I did eventually catch it before a freeze and it was kodi.bin using all the memory. The problem is when it freezes you can not connect to the ssh server to run any commands. I got around the problem by using the addon embycon instead which streams the media without it being added to the kodi video database like kodi does or the main emby addon. As my movie and tv collection gets bigger the time it takes to get to the point that kodi freezes gets shorter.

Aciel · (This post was last modified: 2018-11-24, 16:25 by Aciel.)

@Milhouse
I'm testing your 22/23 Nov RPi2 Build coming from LE 17.6 (8.2.5), but I'm having an issue that my YouTube Add-on Watched History is wiped clean.

This thing does not happened when I last tested the 3 Nov RPi2 Build

wwark · (This post was last modified: 2018-11-24, 14:45 by wwark.)

@Milhouse Thank you PS1 are working with the bios now on the last nightly !

Do not hesitate when you have information about fbalpha !

Wwark

doveman2 · 2018-11-24, 19:43

@Milhouse I updated to #1122 and I'm still seeing the lightning bolt occasionally, so I guess I'll have to get a new PSU. This one was fine with my RPI2 so I'll just power that with it, once I decide what to use it for.

vbat99 · 2018-11-24, 20:26

Rpi3b requires little bit more juice than rpi2

Believe the 3b psus is 2.5a.

robwiel · 2018-11-24, 20:37

Hi, I have issue with #1123 build with 9.0 channel. Can't load any new addons.
New installation, install subtitles => opensubtitles etc. fail. However! if I install first clean LE 8.2.5, install subtitles addon, update to #1123 milhouse.. than it is still listed as working, can't add any other addons though.

Also "lightning bolt" very frequently even in menu despite 3A power.

Ideas?

Termits · 2018-11-25, 00:02

hello,

i have problem with play hevc on raspberry 3b + . When a play video, sound is good bud video is black after few sec raspberry freez.
thanks

Code:
54:46.278 T:1937666064  NOTICE: VideoPlayer::OpenFile: pvr://channels/tv/Všechny kanály/pvr.iptvsimple_171721942.pvr

54:46.352 T:1601860464  NOTICE: Creating InputStream

54:46.503 T:1601860464  NOTICE: Creating Demuxer

54:46.959 T:1601860464  NOTICE: OMXPlayerUnsuitable OMXPlayer unsuitable due to video codec (ad:0/1)

54:46.959 T:1601860464  NOTICE: Opening stream: 0 source: 256

54:46.959 T:1601860464  NOTICE: Creating video codec with codec id: 173

54:46.959 T:1601860464   ERROR: CMMALVideo::Open : Video codec unknown: ad

54:46.959 T:1601860464  NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: HEVC (rpi)

54:46.998 T:1601860464  NOTICE: Opening stream: 1 source: 256

54:46.998 T:1601860464  NOTICE: Finding audio codec for: 86018

54:47.000 T:1601860464  NOTICE: CDVDAudioCodecFFmpeg::Open() Successful opened audio decoder aac

54:47.037 T:1804055408  NOTICE: CDecoder::Open - fmt:183

54:47.667 T:1804055408   ERROR: CMMALPool::GetBuffer - failed pool:0x28e3a90 omvb:(nil) mmal:(nil) timeout:500

54:47.667 T:1804055408   ERROR: CDecoder::FFGetBuffer Failed to allocated buffer in time

54:48.168 T:1804055408   ERROR: CMMALPool::GetBuffer - failed pool:0x28e3a90 omvb:(nil) mmal:(nil) timeout:500

54:48.168 T:1804055408   ERROR: CDecoder::FFGetBuffer Failed to allocated buffer in time

54:48.669 T:1804055408   ERROR: CMMALPool::GetBuffer - failed pool:0x28e3a90 omvb:(nil) mmal:(nil) timeout:500

54:48.669 T:1804055408   ERROR: CDecoder::FFGetBuffer Failed to allocated buffer in time

54:49.170 T:1804055408   ERROR: CMMALPool::GetBuffer - failed pool:0x28e3a90 omvb:(nil) mmal:(nil) timeout:500

54:49.170 T:1804055408   ERROR: CDecoder::FFGetBuffer Failed to allocated buffer in time

54:49.671 T:1804055408   ERROR: CMMALPool::GetBuffer - failed pool:0x28e3a90 omvb:(nil) mmal:(nil) timeout:500

54:49.672 T:1804055408   ERROR: CDecoder::FFGetBuffer Failed to allocated buffer in time

54:49.672 T:1804055408  NOTICE: CDVDVideoCodecFFmpeg::CDropControl: calculated diff time: 21818

54:50.173 T:1804055408   ERROR: CMMALPool::GetBuffer - failed pool:0x28e3a90 omvb:(nil) mmal:(nil) timeout:500

54:50.173 T:1804055408   ERROR: CDecoder::FFGetBuffer Failed to allocated buffer in time

54:50.713 T:1804055408   ERROR: CMMALPool::GetBuffer - failed pool:0x28e3a90 omvb:(nil) mmal:(nil) timeout:500

54:50.714 T:1804055408   ERROR: CDecoder::FFGetBuffer Failed to allocated buffer in time

54:52.159 T:1804055408 WARNING: CRenderManager::WaitForBuffer - timeout waiting for buffer

54:55.144 T:1937666064 WARNING: Previous line repeats 5 times.

Milhouse · 2018-11-25, 03:34

New LibreELEC.tv Leia build #1124: RPi / RPi2
(Supercedes previous build)

SHA256 Checksum: a1efd3e0a4b6a456927ce9701e580614ccf99600c61da5a6ee9a19a97c113554 (RPi)
SHA256 Checksum: 45e2a7d9c31a59fa0b5a02fe914e06e0173ebf3c553f611aa851db6ff4012b85 (RPi2)

text:
# uname -a

Linux rpi512 4.19.4 #1 Sat Nov 24 21:03:39 GMT 2018 armv6l GNU/Linux



# vcgencmd version

Nov  4 2018 16:35:17 

Copyright © 2012 Broadcom

version ed5baf9520a3c4ca82ba38594b898f0c0446da66 (clean) (release)



# lsb_release

LibreELEC (Milhouse): devel-20181124210232-#1124-g73ee817 [Build #1124]



# Kodi version

(18.0-RC2 Git:4ab27b6). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (73ee817, changelog) and tip of XBMC master (4ab27b6, changelog) with the following modifications:

Includes newclock5 patches
Includes latest bcm2835-driver master (66be192, ahead +1)
Includes latest kodi-platform master (e8574b8)
Includes latest libcec master (d57d3ac)
Includes latest libnfs master (6dfc87d, ahead +10)
Includes latest p8-platform master (1eb12b1, ahead +1)
Includes latest addons: inputstream.adaptive (eb5224f, +18), inputstream.rtmp (ce7f559), peripheral.joystick (5429dc4, +2), peripheral.xarcade (f09a0e7), pvr.argustv (83aa1e9, +3), pvr.demo (964686d), pvr.dvblink (c2c799d, +3), pvr.dvbviewer (cda813e, +15), pvr.filmon (e850633, +3), pvr.hdhomerun (a9d7309, +1), pvr.hts (6a12442, +3), pvr.iptvsimple (90a8d6f, +1), pvr.mediaportal.tvserver (b17fdad, +3), pvr.mythtv (0068fcf, +35), pvr.nextpvr (ccdfd63, +3), pvr.njoy (4467cac, +1), pvr.octonet (203f800), pvr.pctv (b60b971, +3), pvr.stalker (a99ad5e, +2), pvr.teleboy (50689bd, +5), pvr.vbox (6ed2f63, +2), pvr.vdr.vnsi (cbb75ab, +3), pvr.vuplus (1207082, +20), pvr.wmc (81e2090, +4), pvr.zattoo (4688f45, +8), vfs.libarchive (6d39012), vfs.sftp (6749200)
Include [env] compare (perma): TESTING: increase timeout to ensure OS is able to create core dump/crash log
Include [env] patch: RPi/RPi2: enable Broadcom WiFi debugging (see details)
Include [env] patch: kodi: use upstream repo for Milhouse RPi builds
Include [env] patch: kodi: remove annoying, excessively repetitive addon logging
Include [env] patch: HACK: Disable multiple PVR addons during migration. Always enable inputstream.* and os.*
Include [env] patch: rev hack for kodi
Include [env] patch: Bump included addon versions to prevent online updates
Include [env] patch: Add experimental splash video for RPi
Include [env] patch: Add kodi binary addons (pvr, adsp, inputstream, vfs, peripheral.joystick/xarcade, other)
Include [pkg] PR:14924 (perma): [games] Fix crash in PCSX ReARMed with BIOS

Build Highlights:

[PVR] Fix CPVRGUITimerInfo::TimerInfoToggle()

Build Details:

LibreELEC.tv:
- eventlircd: Fix OSMC Remote ContextMenu mapping (PR:3116, 1 commit, 2 files changed)
- linux (RPi/Generic): update to linux-4.19.4 (?) (PR:3084, 12 commits, 9 files changed)
XBMC:
- [fix] check add-on version for nullptr before constructing a std:tring (PR:14930, 1 commit, 1 file changed)
- [skin.estuary] Add Hebrew and Armenian typefaces to the fonts (PR:14904, 1 commit, 5 files changed)
- [PVR] Fix CPVRGUITimerInfo::TimerInfoToggle(). (PR:14927, 1 commit, 1 file changed)
pvr.mythtv:
- remove useless feature fileops (57f79b8)
- bump version 5.10.0 (dfdff58)
- fix memory leak in destructor (0068fcf)

start78 · 2018-11-25, 12:58

Lightning bolt is a sign for low voltage, not low current. Issue is probably related to the USB cable (length, quality), or a slight under-voltage of the power adapter itself. 4,8V 3A for example will cause Same issue. Official Raspberry Foundation power adapters usually work.

robwiel · 2018-11-25, 13:20

Got new charger lightning bolt only occasionally shows on load. However even with #1124 NEW addons fail to install. Cant even install log uploader.

HiassofT · 2018-11-25, 14:04

(2018-11-25, 13:20)robwiel Wrote: Got new charger lightning bolt only occasionally shows on load. However even with #1124 NEW addons fail to install. Cant even install log uploader.

Make sure to fix your power supply problems first. Which charger did you get? If by charger you mean a typical phone/tablet charger then it's probably not up to the job. Get the official RPi power supply (5.1V, 2.5A), this is known to work well.
The lightning bolt should be taken as a serious warning sign - if the RPi isn't powered properly all sorts of odd errors may occur, including data corruption on the SD card, crashes etc. It could well be that addons failing to install is a consequence of your power supply problems.

so long,

Hias

totsilence · (This post was last modified: 2018-11-25, 14:57 by totsilence.)

Hi,

libretro game addons have recently started to work again - thanks for that work. I'm able to use the snes9x core, fore example.
However I'm having issues with the ScummVM libretro core. With build #1124 the addon can't be started, the kodi log shows an undefined reference:

13:32:31.637 T:1937841696   DEBUG: ADDON: Dll Initializing - ScummVM
13:32:31.637 T:1937841696   DEBUG: SECTION:LoadDLL(/storage/.kodi/addons/game.libretro/game.libretro.so.1.1.0)
13:32:31.638 T:1937841696   DEBUG: Loading: /storage/.kodi/addons/game.libretro/game.libretro.so.1.1.0
13:32:31.665 T:1937841696   ERROR: AddOnLog: ScummVM: Unable to load: /storage/.kodi/addons/game.libretro.scummvm/game.libretro.scummvm.so: undefined symbol: _ZN3GUI13OptionsDialog5cleanEv
13:32:31.665 T:1937841696   ERROR: AddOnLog: ScummVM: Failed to load /storage/.kodi/addons/game.libretro.scummvm/game.libretro.scummvm.so

Debug log at https://pastebin.com/FW4h7H3v

Not sure if the addon needs another rebuild?

P.S.: For some reason I find two versions of the ScummVM addon: 2.0.0.108 and 2.0.0.0.109. I believe the latter is the newer one, but kodi tries to auto-update to the 108 version, I guess since it's the "newer" numerically. The issue described above happens with both versions.

mcelliott · 2018-11-25, 18:16

(2018-11-17, 21:25)Milhouse Wrote:
(2018-11-17, 21:19)mcelliott Wrote: Do you now need logs for this, or can this be fixed? I will also post a link in the MediaPortal section of the forum.

Regards,

Mark

Letting the MediaPortal folks know would be best, either via the forum or github (whatever they prefer). Thanks for tracking it down, that should help them fix the issue (assuming it's a MP problem, of course)...

I have reported this, but no response as yet.

The strange thing is, beta and RC versions on Windows are fine, so perhaps it is something about the way the streaming interacts with the player. If so, perhaps there is another possible fix? Happy to provide any information you want in order to get this resolved.

Luck · 2018-11-25, 19:23

Good day, I've been there for several months and test the beta, in the beginning it worked without problems and since 1 month approx. I have these problems. I had done a re-installation and installed my addons, which were only emby. I try today in the course of the day times to use the pi without emby and see if it happens then. I have inserted the link for you.
https://paste.kodi.tv/bivudeluvo