Posts: 37
Joined: Jan 2017
Reputation:
0
I rebooted my Pi with the TV off. Not very smart. I'll try again with the TV on. This will "provoke" the CEC issue (where I can't control Kodi with my TV remote), but it won't provoke the 'no signal' issue, because that only happens after changing to another source for a while - and it doesn't happen every time even then.
Posts: 37
Joined: Jan 2017
Reputation:
0
I've cleared dmesg now. I'm going to leave the Pi running with the TV off and do my best to monitor dmesg.
Posts: 37
Joined: Jan 2017
Reputation:
0
With the TV off, and after leaving it for approximately six hours, dmesg shows this:
[14514.469808] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[14514.469868] MAI: soc_pcm_open() failed (-19)
[14514.470589] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[14514.470620] MAI: soc_pcm_open() failed (-19)
[18151.946157] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[18151.946218] MAI: soc_pcm_open() failed (-19)
[18151.946935] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[18151.946967] MAI: soc_pcm_open() failed (-19)
Powered on the TV, and everything working as expected (Kodi there, and CEC working). Checked dmesg again, and got this:
[25481.154194] v3d fec00000.v3d: MMU error from client CLE (4) at 0xca41000, pte invalid
So neither issues is happening right now, but I don't consider this issue 'fixed', because I'm sure it will occur again. It's an intermittent problem (which I'm sure are the hardest to fix), but I've done my best to give as much info as possible.
Posts: 37
Joined: Jan 2017
Reputation:
0
Ok, checked this morning. Turned the TV on, Kodi is there, but CEC isn't working. Checked dmesg and it's just full of this message: cec-vc4: message 10 timed out
Appreciate if anyone can help with either issue I'm having.
Posts: 37
Joined: Jan 2017
Reputation:
0
2022-06-04, 06:30
(This post was last modified: 2022-06-04, 06:33 by Yabbie442.)
So just to rehash: My current configuration sometimes works. There must be some type of 'timeout' issue? I haven't changed any settings, other than running sudo apt update and sudo apt full-upgrade
Restarting Kodi fixes the 'no signal' issue, but not the CEC issue.
Posts: 339
Joined: Aug 2013
Reputation:
21
You could try LibreELEC on another sd-card and see if the issue remains.
Posts: 339
Joined: Aug 2013
Reputation:
21
Ok, so its probably not a problem with Kodi then.