2011-08-16, 14:10
spiff Wrote:uhm, yes. read again. hint; it's an add-on like all scripts these days.
Ok but when i try to install it in install from zip file, it isn't there.
I have windows 7.
Ok but when i try to install it in install from zip file, it isn't there.
I have windows 7.
2011-08-16, 23:01
Dark_Fox Wrote:Ok but when i try to install it in install from zip file, it isn't there.
I have windows 7.
Feel free to port this script to a addon for windows ....
2011-08-18, 11:52
I ran the setup.sh and configured everything (ssh-user is definitely correct) but it says (sorry it's the German message): "Konfigurierter SSH-Benutzer ist nicht aktueller Benutzer".
Did I get something wrong?
I don't run xbmc-live, I run it as normal user (broco) and executed setup.sh with "sudo ./setup.sh broco"; it created the key pair etc but it's not working.
I use Ubuntu 11.04.
Edit: Nevermind, after the installation it reset the configuration.
But when I started transcoding, after 1 minute XBMC quit...
Did I get something wrong?
I don't run xbmc-live, I run it as normal user (broco) and executed setup.sh with "sudo ./setup.sh broco"; it created the key pair etc but it's not working.
I use Ubuntu 11.04.
Edit: Nevermind, after the installation it reset the configuration.
But when I started transcoding, after 1 minute XBMC quit...
2011-08-28, 03:55
Thanks for the excellent tool!
I tried using XBMC live CD, used a USB key to put the .zip file. I was able to update and get the swiss army knife add on loaded. Running the addon it told me to run setup.sh. After some effort I located the xecutor add on and managed to run xterm. Within xterm I could run the setup script and it seemed to run fine.
Next I tried again to run the addon and I got an error saying the license for mkv has expired but after a pause the menu came up.
Since I only have one cd / dvd drive in my system, I need to eject xbmc cd now and put the Dvd in the drive. I clicked on RIP DVD, or Transcode dvd and the message always appears "Inserted disc is not a DVD disc".
So I am wondering if the problem is the expired license, or does it have to do with using the live cd to boot? If I eject the xbmc live cd, do I need to unmount any filesystem? I tried to unmont /dev/sr0 but it complained the file was in use. I tried "fuser -k " but that just resulted in stopping the xbmc and restarting it, again putting the file in use.
Look forward to any advice on this great tool!
I tried using XBMC live CD, used a USB key to put the .zip file. I was able to update and get the swiss army knife add on loaded. Running the addon it told me to run setup.sh. After some effort I located the xecutor add on and managed to run xterm. Within xterm I could run the setup script and it seemed to run fine.
Next I tried again to run the addon and I got an error saying the license for mkv has expired but after a pause the menu came up.
Since I only have one cd / dvd drive in my system, I need to eject xbmc cd now and put the Dvd in the drive. I clicked on RIP DVD, or Transcode dvd and the message always appears "Inserted disc is not a DVD disc".
So I am wondering if the problem is the expired license, or does it have to do with using the live cd to boot? If I eject the xbmc live cd, do I need to unmount any filesystem? I tried to unmont /dev/sr0 but it complained the file was in use. I tried "fuser -k " but that just resulted in stopping the xbmc and restarting it, again putting the file in use.
Look forward to any advice on this great tool!
2011-08-28, 06:11
It seems I should try again to boot xbmc from a usb key instead of booting from the live cd. That way the cd / dvd drive won't be mounted with the live cd, assuming that's the problem.
2011-08-31, 00:09
Hello fellows ;-)
On the project url are new binarys for makemkv 1.6.14 ready to download.
(Both 64 and 32 bit).
@jellyfish
Yes , It would be better to run the xbmc from a stick .-)
On the project url are new binarys for makemkv 1.6.14 ready to download.
(Both 64 and 32 bit).
@jellyfish
Yes , It would be better to run the xbmc from a stick .-)
2011-08-31, 00:11
@Broco
Could you activate the debug-log inside the configuration of the addon and place a full log anywhere in a pastebin ?
Regards Hans
Could you activate the debug-log inside the configuration of the addon and place a full log anywhere in a pastebin ?
Regards Hans
Hi linuxluemmel
I'm running your addon using openELEC generic build and when I try to run it it tells me that I need run ssh and change the settings.
I can access it via ssh but I'm not sure what settings I need to change. I've been searching the thread but its not clear to me what I should be searching for.
I'm running your addon using openELEC generic build and when I try to run it it tells me that I need run ssh and change the settings.
I can access it via ssh but I'm not sure what settings I need to change. I've been searching the thread but its not clear to me what I should be searching for.
2011-11-03, 18:44
@michael7oliver
Sorry for my delay
I had a accident I was not able to be online a few weeks.
You should be able to connect with your current user into the ssh-daemon without any password given.
Inside the settings you have to edit the ssh username used for the ssh connection if it is not xbmc.
I hope this helps.
Regards
Hans
Sorry for my delay
I had a accident I was not able to be online a few weeks.
You should be able to connect with your current user into the ssh-daemon without any password given.
Inside the settings you have to edit the ssh username used for the ssh connection if it is not xbmc.
I hope this helps.
Regards
Hans
2012-01-11, 04:12
Hi all,
I see a lot of progress on the board here but unfortunately I'm still at square 2.
evertything installed fine according to first-run install; ssh works as expected, occasional crash/restart when exiting Programs/addons/Swiss-Army-Knife and Programs/addons/Swiss-Army-Knife/Expert mode
transcode dvd > no activity > working.../crash xbmc OR INFO: Inserted disc is not a dvd disc /crash on exit
expert mode/rip dvd to iso > working.../dvd iso copy could not be started /crash on exit
expert mode/rescue-copy dvd to iso > working.../dvd iso copy could not be started /crash on exit
expert mode/copy vob-files from dvd to hd > working.../dvd vobcopy could not be started [dvd folder created with video_ts subfolder but is empty]
expert mode/transcode & burning/dvd->mkv > working.../no error, no result/crash xbmc OR insterted disc is not a dvd disc /crash on exit
expert mode/transcode & burning/dvd->h264 low-profile > working.../select track to export/add audio; add subtitle/INFO: dvd transcoding started successfully/progress hangs at 97%/mp4 is saved in transcode dir and is playable
here is debug log from xbmc:
http://pastebin.com/b3DPV7T7
saw some comments about the log from SAK but not sure where that is. I found log in: home/mediabox/swiss.army.knife/ssh
http://pastebin.com/Bacz52rz
any help or insight would be much appreciated.
Cul
P.S. Is there an irc channel for any of this?
I see a lot of progress on the board here but unfortunately I'm still at square 2.
evertything installed fine according to first-run install; ssh works as expected, occasional crash/restart when exiting Programs/addons/Swiss-Army-Knife and Programs/addons/Swiss-Army-Knife/Expert mode
transcode dvd > no activity > working.../crash xbmc OR INFO: Inserted disc is not a dvd disc /crash on exit
expert mode/rip dvd to iso > working.../dvd iso copy could not be started /crash on exit
expert mode/rescue-copy dvd to iso > working.../dvd iso copy could not be started /crash on exit
expert mode/copy vob-files from dvd to hd > working.../dvd vobcopy could not be started [dvd folder created with video_ts subfolder but is empty]
expert mode/transcode & burning/dvd->mkv > working.../no error, no result/crash xbmc OR insterted disc is not a dvd disc /crash on exit
expert mode/transcode & burning/dvd->h264 low-profile > working.../select track to export/add audio; add subtitle/INFO: dvd transcoding started successfully/progress hangs at 97%/mp4 is saved in transcode dir and is playable
here is debug log from xbmc:
http://pastebin.com/b3DPV7T7
saw some comments about the log from SAK but not sure where that is. I found log in: home/mediabox/swiss.army.knife/ssh
http://pastebin.com/Bacz52rz
any help or insight would be much appreciated.
Cul
P.S. Is there an irc channel for any of this?
2012-02-10, 04:14
Hello,
what about run the script on fedora?
all setup.sh is only for ubuntu/debian...
what about run the script on fedora?
all setup.sh is only for ubuntu/debian...
2012-05-11, 11:12
Hi - just a quick note to say that I just installed SAK from the repo - running latest xbmcbuntu
Install ran smoothly, no errors at all, customised a few directories and start to rip
At the moment is says "buffering please wait" - fingers crossed it is doing what it is supposed to be doing ;D
cheers for an awesome plugin - I've been looking for something like this for a while
Edit: I had my dvd drive accidently set to /dev/sg0 instead of /dev/scd0 - so after a reboot everything seems to be working.. now to wait for my video to pop out ;D!
Install ran smoothly, no errors at all, customised a few directories and start to rip
At the moment is says "buffering please wait" - fingers crossed it is doing what it is supposed to be doing ;D
cheers for an awesome plugin - I've been looking for something like this for a while
Edit: I had my dvd drive accidently set to /dev/sg0 instead of /dev/scd0 - so after a reboot everything seems to be working.. now to wait for my video to pop out ;D!
2012-06-06, 18:18
I keep getting "Local SSH server is not configured properly" - any idea what's wrong?
I use the official XBMCbuntu.
I use the official XBMCbuntu.
