2011-09-05, 22:14
2011-09-06, 07:37
Memphiz Wrote:based on https://github.com/opdenkamp/xbmc/commit...7d3ff5697f
Take 9:
IOS
ATV2
Thanks Memphiz!
2011-09-06, 10:26
hi,
I'm a long time reader first time poster.
sorry for the noobinity but where can i find a guide for install HOWTO this version on xbmc pvr?
thanks for the great work!!!
I'm a long time reader first time poster.
sorry for the noobinity but where can i find a guide for install HOWTO this version on xbmc pvr?
thanks for the great work!!!
2011-09-06, 11:19
gliko8 Wrote:hi,
I'm a long time reader first time poster.
sorry for the noobinity but where can i find a guide for install HOWTO this version on xbmc pvr?
thanks for the great work!!!
Same as installing a nighly. Only difference is that afterwards you will have pvr addons which are not in the regular nightlies.
2011-09-06, 13:06
OK, I have now installed the take 9 version on my ipad 2 and at the begining I had a huge issue with the scanning part for new TV channels/Radio channels after I had enabled the Mediaportal addon and actived it. The scanning just stopped and nothing happened. As a workaround, I solved this issue by disabling the scan for Radios in the add-on. When I did that, all of my tv-channels was found after a few seconds.
The issue I'm having right now is when I'm trying to switch channels it somehows remember (record/buffering) the channel I just have watched, let's say for 5 min. which means that when I'm trying to switch to another channel, the 5 min. I just have watched earlier is now replayed before the channel switch actually will take place to the new one I have chosen to watch. Now if I have watched 5 minutes again on the new channel and want to switch to a third channel, then I have to watch 2 x 5 minutes from the others channels before the actually channel switch will take place.
I hope that this make sense so you understand my issue.
I have tried to reinstall and make a clean installation 10 times, but the issue with the channel switch is still there.
As a remark, I'm also using a Win 7 laptop connected (also wireless) to the same Mediaportal server and here I don't have any issues switching channels or make a scan for radio channels, so I think that the Mediaportal server is working properly.
Platform: iPad 2, 64GB 3G
Version of iOS: IOS 4.33, build 8J2
XBMC Build version: IOS, Take 9
Install Method: Cydia AutoInstall folder
FULL Debug Log: http://pastebin.com/Lfg0ikZt
Detailed Instructions to Reproduce the Problem: See above
Any suggestions on what is wrong?
The issue I'm having right now is when I'm trying to switch channels it somehows remember (record/buffering) the channel I just have watched, let's say for 5 min. which means that when I'm trying to switch to another channel, the 5 min. I just have watched earlier is now replayed before the channel switch actually will take place to the new one I have chosen to watch. Now if I have watched 5 minutes again on the new channel and want to switch to a third channel, then I have to watch 2 x 5 minutes from the others channels before the actually channel switch will take place.
I hope that this make sense so you understand my issue.
I have tried to reinstall and make a clean installation 10 times, but the issue with the channel switch is still there.
As a remark, I'm also using a Win 7 laptop connected (also wireless) to the same Mediaportal server and here I don't have any issues switching channels or make a scan for radio channels, so I think that the Mediaportal server is working properly.
Platform: iPad 2, 64GB 3G
Version of iOS: IOS 4.33, build 8J2
XBMC Build version: IOS, Take 9
Install Method: Cydia AutoInstall folder
FULL Debug Log: http://pastebin.com/Lfg0ikZt
Detailed Instructions to Reproduce the Problem: See above
Any suggestions on what is wrong?
2011-09-07, 21:29
Update: I have tried to reinstall the MediaPortal tv server application on the windows machine and then install the Take 9 version on my iPad again. It did not make any difference, the issue with channel switching is still there which means that right now I have to shutdown XBMC to switch channel.
The good news is that I don't have any issues with the picture quality or the EPG :o)
Regards,
Cobra_dk
The good news is that I don't have any issues with the picture quality or the EPG :o)
Regards,
Cobra_dk
2011-09-08, 09:45
gliko8 Wrote:hi,
I'm a long time reader first time poster.
sorry for the noobinity but where can i find a guide for install HOWTO this version on xbmc pvr?
thanks for the great work!!!
-SSH to you idevice (putty or secureCRT)
- #wget "path to .deb file (or tranfer using SFTP ie Filezilla)
- #dpkg -i ".deb file"
2011-09-08, 13:18
Kjetil N Wrote:-SSH to you idevice (putty or secureCRT)
- #wget "path to .deb file (or tranfer using SFTP ie Filezilla)
- #dpkg -i ".deb file"
WOW its that simple ha?
thanks alot!!!
2011-09-11, 21:55
Anyone else got problems that the PVR manager hangs at "Importing channels"? Using take 9 and the latest Tvheadend from andomas git repo... No xbmc.log available
2011-09-11, 22:12
me too ... but here is nobody who knows anything about the pvr stuff ... better report bugs in the pvr dev forum...
2011-09-17, 16:08
hi,
i have copied my .deb file to the atv2 root using filezila and
i am trying to install but getting this error in PuTTy:
Apple-TV:~ root# dpkg -i 1.deb
Selecting previously deselected package org.xbmc.xbmc-atv2.
(Reading database ... 1285 files and directories currently installed.)
Unpacking org.xbmc.xbmc-atv2 (from 1.deb) ...
dpkg: dependency problems prevent configuration of org.xbmc.xbmc-atv2:
org.xbmc.xbmc-atv2 depends on org.awkwardtv.whitelist; however:
Package org.awkwardtv.whitelist is not installed.
org.xbmc.xbmc-atv2 depends on org.xbmc.xbmc-seatbeltunlock; however:
Package org.xbmc.xbmc-seatbeltunlock is not installed.
dpkg: error processing org.xbmc.xbmc-atv2 (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
org.xbmc.xbmc-atv2
Apple-TV:~ root#
please help
i have copied my .deb file to the atv2 root using filezila and
i am trying to install but getting this error in PuTTy:
Apple-TV:~ root# dpkg -i 1.deb
Selecting previously deselected package org.xbmc.xbmc-atv2.
(Reading database ... 1285 files and directories currently installed.)
Unpacking org.xbmc.xbmc-atv2 (from 1.deb) ...
dpkg: dependency problems prevent configuration of org.xbmc.xbmc-atv2:
org.xbmc.xbmc-atv2 depends on org.awkwardtv.whitelist; however:
Package org.awkwardtv.whitelist is not installed.
org.xbmc.xbmc-atv2 depends on org.xbmc.xbmc-seatbeltunlock; however:
Package org.xbmc.xbmc-seatbeltunlock is not installed.
dpkg: error processing org.xbmc.xbmc-atv2 (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
org.xbmc.xbmc-atv2
Apple-TV:~ root#
please help
2011-09-17, 19:26
install the official xbmc version first:
apt-get install org.xbmc.xbmc-atv2
and then retry to install the 1.deb ...
apt-get install org.xbmc.xbmc-atv2
and then retry to install the 1.deb ...
2011-09-18, 00:12
Memphiz Wrote:install the official xbmc version first:
apt-get install org.xbmc.xbmc-atv2
and then retry to install the 1.deb ...
i have tried it before and the process in putty just hang there.
ill try again tomorrow and post.
thanks!