[Killerzmurf]

I see there has been alot of problems with this in the past, but in every case the situation is a bit different from mine and I'm sitting back with more questions than answeres while reading other similar posts. So I'll just give it a go despereate as i am...

Summary of my situation:
When choosing "shutdown" -> "suspend" I get a black screen for a couple of seconds, then some text in 3 lines popup on the black screen faster than I'm able to read before I'm thrown back into the XBMC menu. All this in a few seconds.
I've managed to record this from my phone and pause the picture so I could read the text, here is what it says;

[17476.022166] pm_op(): usb-dev-suspend+0x0/0x20 returns -Z
[17476.022172] PM: Device usb6 failed to suspend: error -Z
[17476.022176] PM: Some devices failed to suspend

For the hibernate function the same thing happens, but with some difference in the text lines;

[17455.599013] pm-op(): usb_dev-freeze+0x0/0x20 returns -Z
[17455.599919] PM: Device usb6 failed to freeze: error -Z

The power off function works as it is supposed to.

My setup is XBMC live 10.1 Dharma, fresh install on an USB stick with a Asus AT5IONT-I motherboard. http://www.asus.com/Motherboards/Intel_C...ifications

Bios settings:

Suspend mode: S3 only
ACPI 2.0 support: enable
ACPI APIC support: disable

APM configuration:
Restore on AC power loss: power off
Resume on RTC alarm: disable
Power on by PME: enable
Power on by PS/2 keyboard: power key
Power on by PS/2 mouse: enable

I have a wireless keyboard and a mce remote connected to the XBMC computer (usb), both working out of the box without altering any options or anything.

I am missing the suspend function sooo much! and would greatly apreciate if someone could help me out with this as Im not a linux man.

[Killerzmurf]

Here is my debug log;

The log was so big that I couldnt add all of it, so I hope this will do?

DEBUG: ------ Window Init (Settings.xml) ------
02:28:54 T:3077519232 M:2961637376 INFO: Loading skin file: Settings.xml
02:28:55 T:3077519232 M:2953981952 DEBUG: ExecuteXBMCAction : Translating SetFocus(1)
02:28:55 T:3077519232 M:2953981952 DEBUG: ExecuteXBMCAction : To SetFocus(1)
02:28:55 T:3077519232 M:2953981952 DEBUG: Loading: /usr/lib/xbmc/system/ImageLib-i486-linux.so
02:28:57 T:3077519232 M:2950275072 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:28:57 T:3077519232 M:2950275072 DEBUG: OnKey: 61480 pressed, action is Down
02:28:57 T:3077519232 M:2946473984 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:28:57 T:3077519232 M:2946473984 DEBUG: OnKey: 61480 pressed, action is Down
02:28:57 T:3077519232 M:2950193152 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:28:57 T:3077519232 M:2950193152 DEBUG: OnKey: 61480 pressed, action is Down
02:28:57 T:3077519232 M:2950193152 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:28:57 T:3077519232 M:2950193152 DEBUG: OnKey: 61480 pressed, action is Down
02:28:58 T:3077519232 M:2950250496 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:28:58 T:3077519232 M:2950250496 DEBUG: OnKey: 61480 pressed, action is Down
02:28:59 T:3077519232 M:2950209536 DEBUG: SDLKeyboard: scancode: 36, sym: 13, unicode: 13, modifier: 0
02:28:59 T:3077519232 M:2950209536 DEBUG: OnKey: 61453 pressed, action is Select
02:28:59 T:3077519232 M:2950209536 DEBUG: ExecuteXBMCAction : Translating ActivateWindow(SystemSettings)
02:28:59 T:3077519232 M:2950209536 DEBUG: ExecuteXBMCAction : To ActivateWindow(SystemSettings)
02:28:59 T:3077519232 M:2950209536 DEBUG: Activating window ID: 10016
02:28:59 T:3077519232 M:2950209536 DEBUG: Checking if window ID 10016 is locked.
02:28:59 T:3077519232 M:2950209536 DEBUG: ------ Window Deinit (Settings.xml) ------
02:28:59 T:3077519232 M:2950209536 DEBUG: ------ Window Init (SettingsCategory.xml) ------
02:28:59 T:3077519232 M:2950209536 INFO: Loading skin file: SettingsCategory.xml
02:29:00 T:3077519232 M:2962796544 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:29:00 T:3077519232 M:2962796544 DEBUG: OnKey: 61480 pressed, action is Down
02:29:00 T:3077519232 M:2962862080 DEBUG: PulseAudio: Context failed
02:29:00 T:3077519232 M:2962862080 ERROR: PulseAudio: Waited for the Context but it failed
02:29:00 T:3077519232 M:2962862080 ERROR: PulseAudio: Failed to create context
02:29:01 T:3077519232 M:2962862080 WARNING: Failed to find previously selected audio sink
02:29:01 T:3077519232 M:2962862080 DEBUG: PulseAudio: Context failed
02:29:01 T:3077519232 M:2962862080 ERROR: PulseAudio: Waited for the Context but it failed
02:29:01 T:3077519232 M:2962862080 ERROR: PulseAudio: Failed to create context
02:29:01 T:3077519232 M:2962862080 WARNING: Failed to find previously selected audio sink
02:29:01 T:3077519232 M:2962862080 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:29:01 T:3077519232 M:2962862080 DEBUG: OnKey: 61480 pressed, action is Down
02:29:01 T:3077519232 M:2962862080 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:29:01 T:3077519232 M:2962862080 DEBUG: OnKey: 61480 pressed, action is Down
02:29:02 T:3077519232 M:2962849792 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:29:02 T:3077519232 M:2962849792 DEBUG: OnKey: 61480 pressed, action is Down
02:29:03 T:3077519232 M:2962849792 DEBUG: SDLKeyboard: scancode: 36, sym: 13, unicode: 13, modifier: 0
02:29:03 T:3077519232 M:2962849792 DEBUG: OnKey: 61453 pressed, action is Select
02:29:03 T:3077519232 M:2962849792 DEBUG: ExecuteXBMCAction : Translating SetFocus(800)
02:29:03 T:3077519232 M:2962849792 DEBUG: ExecuteXBMCAction : To SetFocus(800)
02:29:03 T:3077519232 M:2962849792 DEBUG: SDLKeyboard: scancode: 114, sym: 275, unicode: 0, modifier: 0
02:29:03 T:3077519232 M:2962849792 DEBUG: OnKey: 61479 pressed, action is Right
02:29:05 T:3077519232 M:2962968576 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:29:05 T:3077519232 M:2962968576 DEBUG: OnKey: 61480 pressed, action is Down
02:29:05 T:3077519232 M:2962968576 DEBUG: PulseAudio: Context failed
02:29:05 T:3077519232 M:2962968576 ERROR: PulseAudio: Waited for the Context but it failed
02:29:05 T:3077519232 M:2962968576 ERROR: PulseAudio: Failed to create context
02:29:05 T:3077519232 M:2962968576 WARNING: Failed to find previously selected audio sink
02:29:05 T:3077519232 M:2962976768 DEBUG: PulseAudio: Context failed
02:29:05 T:3077519232 M:2962976768 ERROR: PulseAudio: Waited for the Context but it failed
02:29:05 T:3077519232 M:2962976768 ERROR: PulseAudio: Failed to create context
02:29:06 T:3077519232 M:2962976768 WARNING: Failed to find previously selected audio sink
02:29:06 T:3077519232 M:2962976768 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:29:06 T:3077519232 M:2962976768 DEBUG: OnKey: 61480 pressed, action is Down
02:29:06 T:3077519232 M:2962976768 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:29:06 T:3077519232 M:2962976768 DEBUG: OnKey: 61480 pressed, action is Down
02:29:07 T:3077519232 M:2962968576 DEBUG: SDLKeyboard: scancode: 116, sym: 274, unicode: 0, modifier: 0
02:29:07 T:3077519232 M:2962968576 DEBUG: OnKey: 61480 pressed, action is Down
02:29:07 T:3077519232 M:2962968576 DEBUG: SDLKeyboard: scancode: 114, sym: 275, unicode: 0, modifier: 0
02:29:07 T:3077519232 M:2962968576 DEBUG: OnKey: 61479 pressed, action is Right
02:29:08 T:3077519232 M:2962968576 DEBUG: SDLKeyboard: scancode: 36, sym: 13, unicode: 13, modifier: 0
02:29:08 T:3077519232 M:2962968576 DEBUG: OnKey: 61453 pressed, action is Select
02:29:08 T:3077519232 M:2962968576 NOTICE: Disabled debug logging due to GUI setting. Level 0.

[teeedubb]

From a quick glance at your log files it looks as though as USB device is failing to suspend. You need to create a script is /etc/pm/resume.d (from memory) to unload/reload the driver for the offending USB peripheral device.

[Killerzmurf]

Thanks teeedubb.

ok, so I have managed to get abit closer.

I went in to BIOS and sat "onboard usb 3.0 controller" to "disable". After this I can now put my XBMC in suspend without it popping back into the XBMC menu.
But now I can't wake it from suspend from my remote or keyboard, to wake it I have to press the power button on the computer itself.

So I found this guide that should fix the problem, with the chapter "Fixing wake from suspend via USB/IR remote" :
http://redherring2.wordpress.com/2009/06...tup-guide/
This guide is actually ment for an asrock system, but I think they are based on an ION system that is pretty similar to my selfbuilt mediacenter so I was hoping it would work for me aswell, but no luck here

For information my /etc/rc.local now looks like this; just as the guide says...

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
echo USB0 > /proc/acpi/wakeup
exit 0

Any more ideas?

[teeedubb]

Try this http://wiki.xbmc.org/index.php?title=Ubu...end_/_Wake

[Killerzmurf]

Try this http://wiki.xbmc.org/index.php?title=Ubu...end_/_Wake

Nice guide, basically the same thing as the other guide i mentioned earlier, but this one was better.

I added the following: to my /etc/rc.local :

echo USB0 > /proc/acpi/wakeup
echo "rc.local has completed sucessfully." >> /tmp/resume.log
exit 0

With this my keyboard would wake up again, I then tried to change the number from echo USB0..... to echo USB1.... and up tp 4 without any respons on my remote. I then changed it back to echo USB0... and switched places between the keyboard and the IR-reciever. And voila, the remote wakeup worked.

Thanks for your help...