2011-05-30, 02:06
I see there has been alot of problems with this in the past, but in every case the situation is a bit different from mine and I'm sitting back with more questions than answeres while reading other similar posts. So I'll just give it a go despereate as i am...
Summary of my situation:
When choosing "shutdown" -> "suspend" I get a black screen for a couple of seconds, then some text in 3 lines popup on the black screen faster than I'm able to read before I'm thrown back into the XBMC menu. All this in a few seconds.
I've managed to record this from my phone and pause the picture so I could read the text, here is what it says;
[17476.022166] pm_op(): usb-dev-suspend+0x0/0x20 returns -Z
[17476.022172] PM: Device usb6 failed to suspend: error -Z
[17476.022176] PM: Some devices failed to suspend
For the hibernate function the same thing happens, but with some difference in the text lines;
[17455.599013] pm-op(): usb_dev-freeze+0x0/0x20 returns -Z
[17455.599919] PM: Device usb6 failed to freeze: error -Z
The power off function works as it is supposed to.
My setup is XBMC live 10.1 Dharma, fresh install on an USB stick with a Asus AT5IONT-I motherboard. http://www.asus.com/Motherboards/Intel_C...ifications
Bios settings:
Suspend mode: S3 only
ACPI 2.0 support: enable
ACPI APIC support: disable
APM configuration:
Restore on AC power loss: power off
Resume on RTC alarm: disable
Power on by PME: enable
Power on by PS/2 keyboard: power key
Power on by PS/2 mouse: enable
I have a wireless keyboard and a mce remote connected to the XBMC computer (usb), both working out of the box without altering any options or anything.
I am missing the suspend function sooo much! and would greatly apreciate if someone could help me out with this as Im not a linux man.
Summary of my situation:
When choosing "shutdown" -> "suspend" I get a black screen for a couple of seconds, then some text in 3 lines popup on the black screen faster than I'm able to read before I'm thrown back into the XBMC menu. All this in a few seconds.
I've managed to record this from my phone and pause the picture so I could read the text, here is what it says;
[17476.022166] pm_op(): usb-dev-suspend+0x0/0x20 returns -Z
[17476.022172] PM: Device usb6 failed to suspend: error -Z
[17476.022176] PM: Some devices failed to suspend
For the hibernate function the same thing happens, but with some difference in the text lines;
[17455.599013] pm-op(): usb_dev-freeze+0x0/0x20 returns -Z
[17455.599919] PM: Device usb6 failed to freeze: error -Z
The power off function works as it is supposed to.
My setup is XBMC live 10.1 Dharma, fresh install on an USB stick with a Asus AT5IONT-I motherboard. http://www.asus.com/Motherboards/Intel_C...ifications
Bios settings:
Suspend mode: S3 only
ACPI 2.0 support: enable
ACPI APIC support: disable
APM configuration:
Restore on AC power loss: power off
Resume on RTC alarm: disable
Power on by PME: enable
Power on by PS/2 keyboard: power key
Power on by PS/2 mouse: enable
I have a wireless keyboard and a mce remote connected to the XBMC computer (usb), both working out of the box without altering any options or anything.
I am missing the suspend function sooo much! and would greatly apreciate if someone could help me out with this as Im not a linux man.