2011-12-19, 00:23
actually I do not have 1.3 installed as when I built the required lib I have also built and installed newest boblightd. It does not write the version number in any output, but I think it's true.
XBMC pops up and says it cannot connect. boblight-constant has no problem connecting and colors are displayed.
XBMC log:
If I telnet to the port I get connection refused also.
If I start boblightd from prompt:
boblight-constant:
XBMC pops up and says it cannot connect. boblight-constant has no problem connecting and colors are displayed.
XBMC log:
Code:
NOTICE: boblight: connection to boblightd failed: getsockopt() 127.0.0.1:19333 Connection refused
If I telnet to the port I get connection refused also.
If I start boblightd from prompt:
Code:
atv@Crystalbuntu:~/trunk$ sudo boblightd -f
Nr of devices: 1
Nr of lights: 5
Nr of colors: 3
Port: 19333
Interface: 127.0.0.1
Device AmbX_Combust
Type: 2
Output: ruby /usr/local/combustd/applications/boblight/boblight.rb
Channels: 15
Interval: 20000
Period: -1
Rate: -1
Color red
RGB: ff0000
Adjust: 1.0
Blacklevel: 0.0
Gamma: 1.0
Color green
RGB: 00ff00
Adjust: 1.0
Blacklevel: 0.0
Gamma: 1.0
Color blue
RGB: 0000ff
Adjust: 1.0
Blacklevel: 0.0
Gamma: 1.0
Light left
Number of colors: 3
Color 0: red
Color 1: green
Color 2: blue
Interpolation is on
Hscan: 0.0-33.3
Vscan: 0.0-66.7
Proportional: 20.0
Saturation: 3.0
Value: 15.0
Valuerange: 0.0-1.0
Use this light
Average method used
Black threshold: 20
Light right
Number of colors: 3
Color 0: red
Color 1: green
Color 2: blue
Interpolation is on
Hscan: 66.7-100.0
Vscan: 0.0-66.7
Proportional: 20.0
Saturation: 3.0
Value: 15.0
Valuerange: 0.0-1.0
Use this light
Average method used
Black threshold: 20
Light wwleft
Number of colors: 3
Color 0: red
Color 1: green
Color 2: blue
Interpolation is on
Hscan: 0.0-40.0
Vscan: 0.0-33.3
Proportional: 20.0
Saturation: 3.0
Value: 5.0
Valuerange: 0.0-1.0
Use this light
Average method used
Black threshold: 20
Light wwright
Number of colors: 3
Color 0: red
Color 1: green
Color 2: blue
Interpolation is on
Hscan: 60.0-100.0
Vscan: 0.0-33.3
Proportional: 20.0
Saturation: 3.0
Value: 5.0
Valuerange: 0.0-1.0
Use this light
Average method used
Black threshold: 20
Light wwcenter
Number of colors: 3
Color 0: red
Color 1: green
Color 2: blue
Interpolation is on
Hscan: 33.0-66.0
Vscan: 0.0-33.3
Proportional: 20.0
Saturation: 3.0
Value: 15.0
Valuerange: 0.0-1.0
Use this light
Average method used
Black threshold: 20
Starting popen daemon on ruby /usr/local/combustd/applications/boblight/boblight.rb
boblight - a small tool to listen to the output of boblight popen to control a set of Philips Ambx lights.
See README and docs/ for faq, usage and support.
Looking for support ?
Chat: irc.oceanius.com #dev
Mail: [email protected]
Format: ruby boblight.rb r1 g1 b1 r2 g2 b2 r3 g3 b3 r4 g4 b4 r5 g5 b5
boblight-constant:
Code:
Starting boblight-constant with color ff00ff
Received hello from new client 127.0.0.1:56864
Assigning number 0 to client
Sending global config to 127.0.0.1:56864
Sending lights config to 127.0.0.1:56864
Timeout of 127.0.0.1:56864 set to 20
Priority of 127.0.0.1:56864 set to 200
127.0.0.1:56864 light left interpolation off
127.0.0.1:56864 light left proportional set to 20.000000
127.0.0.1:56864 light left saturation set to 1.00
127.0.0.1:56864 light left value set to 1.00
127.0.0.1:56864 light left valuerange set to 0.00-1.00
127.0.0.1:56864 use light left
127.0.0.1:56864 light right interpolation off
127.0.0.1:56864 light right proportional set to 20.000000
127.0.0.1:56864 light right saturation set to 1.00
127.0.0.1:56864 light right value set to 1.00
127.0.0.1:56864 light right valuerange set to 0.00-1.00
127.0.0.1:56864 use light right
127.0.0.1:56864 light wwleft interpolation off
127.0.0.1:56864 light wwleft proportional set to 20.000000
127.0.0.1:56864 light wwleft saturation set to 1.00
127.0.0.1:56864 light wwleft value set to 1.00
127.0.0.1:56864 light wwleft valuerange set to 0.00-1.00
127.0.0.1:56864 use light wwleft
127.0.0.1:56864 light wwright interpolation off
127.0.0.1:56864 light wwright proportional set to 20.000000
127.0.0.1:56864 light wwright saturation set to 1.00
127.0.0.1:56864 light wwright value set to 1.00
127.0.0.1:56864 light wwright valuerange set to 0.00-1.00
127.0.0.1:56864 use light wwright
127.0.0.1:56864 light wwcenter interpolation off
127.0.0.1:56864 light wwcenter proportional set to 20.000000
127.0.0.1:56864 light wwcenter saturation set to 1.00
127.0.0.1:56864 light wwcenter value set to 1.00
127.0.0.1:56864 light wwcenter valuerange set to 0.00-1.00
127.0.0.1:56864 use light wwcenter