2012-04-16, 22:42
Played around with .mkv, .ts and .m2ts remux of this stream:
.mkv: video, but no audio
.ts: no video, horrible noise, scratching etc. receiver completely confused
.m2ts: video, no audio. Video stops after 10 secs (the 20th Century Fox logo)
My receiver is an Onkyo TX-NR609.
HTPC has been based on a Llano A3650 with A75 chipset. Output device set to Directsound: AMD HDMI. Didn't try WASAPI. Should that matter at all ?
Code:
General
ID : 1 (0x1)
Complete name : M:\starwars.ts
Format : MPEG-TS
File size : 17.0 MiB
Duration : 31s 786ms
Overall bit rate mode : Variable
Overall bit rate : 4 472 Kbps
Maximum Overall bit rate : 35.5 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Codec ID : 27
Duration : 31s 782ms
Bit rate mode : Variable
Bit rate : 2 726 Kbps
Nominal bit rate : 12.6 Mbps
Maximum bit rate : 40.0 Mbps
Width : 1 920 pixels
Height : 818 pixels
Display aspect ratio : 2.35:1
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.072
Stream size : 10.3 MiB (61%)
Writing library : x264 core 120 r2120 0c7dab9
Encoding settings : cabac=1 / ref=5 / deblock=1:-3:-2 / analyse=0x3:0x113 / me=umh / subme=10 / psy=1 / psy_rd=1.00:0.15 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-3 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=9 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=2pass / mbtree=0 / bitrate=12630 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=40000 / vbv_bufsize=40000 / nal_hrd=none / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.05 / zones=173859,179366,q=31,deblock=1
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : DTS
Format/Info : Digital Theater Systems
Format profile : ES
Codec ID : 130
Duration : 31s 787ms
Bit rate mode : Constant
Bit rate : 1 510 Kbps
Channel(s) : 7 channels / 6 channels
Channel positions : Front: L C R, Side: L R, Back: C, LFE / Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 24 bits
Compression mode : Lossy
Stream size : 5.72 MiB (34%)
.mkv: video, but no audio
.ts: no video, horrible noise, scratching etc. receiver completely confused
.m2ts: video, no audio. Video stops after 10 secs (the 20th Century Fox logo)
My receiver is an Onkyo TX-NR609.
HTPC has been based on a Llano A3650 with A75 chipset. Output device set to Directsound: AMD HDMI. Didn't try WASAPI. Should that matter at all ?