2012-03-16, 03:59
Hello people, a search my problem but no find some solution for me, a few months i configure my new ZBOX ID41 to run with XBMCLive, and this is fine, i have the problems with the sound over HDMI, but the forum and the site help me.
My Hardware have 3 sound outputs,
HDMI, OPTICAL and Analog P2
I want to run the sound over all the sound output of my device, i seash on forum e i make the sound output in all outputs. (HDMI, OPTICAL and ANALOG FRONT)
I use the asound.conf of "asound.conf_double-xs35gt.sample" whit no modifications
I confiogure the audio setting like this topic says:
www.openelec.tv/forum/14-general-help-an...box-ad02-hdmioptical
Work fine, all the outputs have sound, but have a problem
My TV only support 2.0 sound and if i play DTS, i have a strange noise.
I have one receiver with DTS and 5.1 support
And have some stereo phones
So i want toh bind and configure my Alsa toh each output and make they a multiple sound
HDMI -> 2.0, DTS off and AC3 off (decoded and downmixed)
ANALOG -> 2.0, DTS off and AC3 off (decoded and downmixed)
OPTICAL -> 5.1, DTS on and AC3 on (passedthrough)
And i want they 3 play simultaneously in multiple sound.
Whenever I change the file asound.config, a make some crap.
Can anyone help to make this, it is possible
My Aplay
root ~ # aplay -l
root ~ # aplay -L
My asound.confwhen i use pcm.both, i have multiple sound
PS: Sorry abount my english!
My Hardware have 3 sound outputs,
HDMI, OPTICAL and Analog P2
I want to run the sound over all the sound output of my device, i seash on forum e i make the sound output in all outputs. (HDMI, OPTICAL and ANALOG FRONT)
I use the asound.conf of "asound.conf_double-xs35gt.sample" whit no modifications
I confiogure the audio setting like this topic says:
www.openelec.tv/forum/14-general-help-an...box-ad02-hdmioptical
Work fine, all the outputs have sound, but have a problem
My TV only support 2.0 sound and if i play DTS, i have a strange noise.
I have one receiver with DTS and 5.1 support
And have some stereo phones
So i want toh bind and configure my Alsa toh each output and make they a multiple sound
HDMI -> 2.0, DTS off and AC3 off (decoded and downmixed)
ANALOG -> 2.0, DTS off and AC3 off (decoded and downmixed)
OPTICAL -> 5.1, DTS on and AC3 on (passedthrough)
And i want they 3 play simultaneously in multiple sound.
Whenever I change the file asound.config, a make some crap.
Can anyone help to make this, it is possible
My Aplay
root ~ # aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
root ~ # aplay -L
Code:
null
Discard all samples (playback) or generate zero samples (capture)
front:CARD=Intel,DEV=0
HDA Intel, ALC892 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC892 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
HDMI Audio Output
My asound.confwhen i use pcm.both, i have multiple sound
Code:
pcm.!default {
type plug
slave {
pcm both
}
}
pcm.both {
type route
slave {
pcm multi
channels 4
}
ttable.0.0 1.0
ttable.1.1 1.0
ttable.0.2 1.0
ttable.1.3 1.0
}
pcm.multi {
type multi
slaves.a {
pcm tv
channels 2
}
slaves.b {
pcm receiver
channels 2
}
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
}
pcm.receiver {
type hw
card 0
device 0
channels 2
}
pcm.tv {
type hw
card 1
device 7
channels 2
}
PS: Sorry abount my english!