2012-03-30, 22:40
I have the same problems, tyring to get MCE remote via Soundgraph imon to work with EDEN. My config is this:
I have the same hardware.conf as dave with the exception that I use lircd.conf.imon-mceusb".
Also before in Dharma to get any keys recognized I had to create a lirc_imon.conf file in /etc/modprobe.d containing just one line:
options lirc_imon ir_protocol=1
So dave, you could try this but I guess then you can't start the lirc daemon cause that's what's happening to me now. First I got unrecognized option then I got broken configuration, check hardware.conf.
Everything worked fine under Dharma where I also had to configure quite a few things, but now it seems hopeless. Mythbuntu forum users are talking about some broken lirc_imon drivers/modules in newer linux kernels, I hope that's not the case with xbmcbunte but my best guess is now that in fact it is the problem we are experiencing right now
See also http://forum.xbmc.org/showthread.php?tid=127098 . There were three steps mentioned to somehow downgrade to the good old working lirc_imon, but I don't know how to exactly do the mentioned steps to test if it works.
BTW I tried the way with inputlirc, too, but that's not really bearable for me. I got all the old problems with buttons responding kind of sluggish or too quick etc. , that's why I bought a MCE remote in the first place and put the imon remote in the dumpster.
Well, if nothing else comes up I guess we have to downgrade and wait till some linux experts figure out a way...if ever. I hope there are enough experienced users with the soundgraph IR product else we will all end up like me with a certain WLAN USB stick that will never EVER work under linux because no one cares. I really like the whole concept of linux and OpenSource in general but sometimes it gets frustrating. Well, shouldn't complain really because it's all for free.
Code:
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0003 Vendor=04fc Product=05d8 Version=0100
N: Name="MLK HAMA Black combo set"
P: Phys=usb-0000:00:06.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1:1.0/input/input2
U: Uniq=
H: Handlers=sysrq kbd event2
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=1f
I: Bus=0003 Vendor=04fc Product=05d8 Version=0100
N: Name="MLK HAMA Black combo set"
P: Phys=usb-0000:00:06.0-1/input1
S: Sysfs=/devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1:1.1/input/input3
U: Uniq=
H: Handlers=kbd mouse0 event3
B: PROP=0
B: EV=1f
B: KEY=4837fff 72ff32d bf544446 0 0 1f0001 20f90 8b17c000 677bfa d941dfed 9ed680 4400 0 10000002
B: REL=1c3
B: ABS=1 0
B: MSC=10
I: Bus=0003 Vendor=15c2 Product=0038 Version=0002
N: Name="iMON Panel, Knob and Mouse(15c2:0038)"
P: Phys=usb-0000:00:06.0-2/input1
S: Sysfs=/devices/pci0000:00/0000:00:06.0/usb4/4-2/4-2:1.0/input/input4
U: Uniq=
H: Handlers=kbd mouse1 event4
B: PROP=0
B: EV=100007
B: KEY=10800320 2000002 0 0 30000 4 110000 4110 801 e1680 0 0 10000002
B: REL=103
I: Bus=0001 Vendor=13c2 Product=101a Version=0001
N: Name="Budget-CI dvb ir receiver saa7146 (0)"
P: Phys=pci-0000:01:05.0/ir0
S: Sysfs=/devices/pci0000:00/0000:00:09.0/0000:01:05.0/rc/rc0/input5
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=100013
B: KEY=40fc010 202061 0 0 0 0 8000 4180 80002001 9e1680 0 0 ffc
B: MSC=10
I: Bus=0003 Vendor=15c2 Product=0038 Version=0002
N: Name="iMON Remote (15c2:0038)"
P: Phys=usb-0000:00:06.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:06.0/usb4/4-2/4-2:1.0/rc/rc1/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=100013
B: KEY=fff 0 0 0 108fc322 2176041 0 0 0 4 118000 4180 1 9e9680 0 0 10000000
B: MSC=10
I have the same hardware.conf as dave with the exception that I use lircd.conf.imon-mceusb".
Also before in Dharma to get any keys recognized I had to create a lirc_imon.conf file in /etc/modprobe.d containing just one line:
options lirc_imon ir_protocol=1
So dave, you could try this but I guess then you can't start the lirc daemon cause that's what's happening to me now. First I got unrecognized option then I got broken configuration, check hardware.conf.
Everything worked fine under Dharma where I also had to configure quite a few things, but now it seems hopeless. Mythbuntu forum users are talking about some broken lirc_imon drivers/modules in newer linux kernels, I hope that's not the case with xbmcbunte but my best guess is now that in fact it is the problem we are experiencing right now
See also http://forum.xbmc.org/showthread.php?tid=127098 . There were three steps mentioned to somehow downgrade to the good old working lirc_imon, but I don't know how to exactly do the mentioned steps to test if it works.
BTW I tried the way with inputlirc, too, but that's not really bearable for me. I got all the old problems with buttons responding kind of sluggish or too quick etc. , that's why I bought a MCE remote in the first place and put the imon remote in the dumpster.
Well, if nothing else comes up I guess we have to downgrade and wait till some linux experts figure out a way...if ever. I hope there are enough experienced users with the soundgraph IR product else we will all end up like me with a certain WLAN USB stick that will never EVER work under linux because no one cares. I really like the whole concept of linux and OpenSource in general but sometimes it gets frustrating. Well, shouldn't complain really because it's all for free.