2012-04-02, 17:15
So I tried all of your steps above and at this step:
"Press F6: and you will be prompted with a selection window. In my example i have device 0 "HDA Intel" and device 1 "HDA NVidia". Select the second option and you will now see that you probably only have one option. This option is probably the 'S/PDIF' and it most likely will have a 'MM'. I just installed Eden 11 yesterday on a fresh install and mine was muted out of the box. Good chance yours is as well.
"
I can't unmute the 0,3 HDMI S/PDIF portion for some reason?
I also couldn't find ~/asound.conf, but do have a /home/$USER/.asoundrc file I could post.
My aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
So my XBMCbuntu is configured to use CUSTOM for both output/passthrough and with PLUGHW:1,3.
My setup is Acer Revo 3700->HDMI -> TV -> receiver
Any thoughts/advice would be appreciated. I just updated and love the default remote with IR receiver functionality but am frustrated with no audio over HDMI!
"Press F6: and you will be prompted with a selection window. In my example i have device 0 "HDA Intel" and device 1 "HDA NVidia". Select the second option and you will now see that you probably only have one option. This option is probably the 'S/PDIF' and it most likely will have a 'MM'. I just installed Eden 11 yesterday on a fresh install and mine was muted out of the box. Good chance yours is as well.
"
I can't unmute the 0,3 HDMI S/PDIF portion for some reason?
I also couldn't find ~/asound.conf, but do have a /home/$USER/.asoundrc file I could post.
My aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
So my XBMCbuntu is configured to use CUSTOM for both output/passthrough and with PLUGHW:1,3.
My setup is Acer Revo 3700->HDMI -> TV -> receiver
Any thoughts/advice would be appreciated. I just updated and love the default remote with IR receiver functionality but am frustrated with no audio over HDMI!