Posts: 266
Joined: Apr 2012
Reputation:
2
MrKay
Senior Member
Posts: 266
2012-05-09, 22:52
(This post was last modified: 2012-05-09, 22:55 by MrKay.)
my cpu temp is around 50 mobo tem is 41
can some one help me with the bios settings
Posts: 266
Joined: Apr 2012
Reputation:
2
MrKay
Senior Member
Posts: 266
2012-05-09, 23:02
(This post was last modified: 2012-05-09, 23:06 by MrKay.)
I think it was over clocking by it self because the dram voltage was at 1.650v
Now the cpu cooler fan goes up and down the sound i mean and nothing on screen
Posts: 266
Joined: Apr 2012
Reputation:
2
MrKay
Senior Member
Posts: 266
Got to bios again. But need help setting it up so the tem dont go crazy
Posts: 266
Joined: Apr 2012
Reputation:
2
MrKay
Senior Member
Posts: 266
2012-05-10, 00:11
(This post was last modified: 2012-05-10, 00:12 by MrKay.)
Should i put the dram voltage at 1.500v that's in bios in oc tweaker settings. At the moment its on 1.650v
Posts: 266
Joined: Apr 2012
Reputation:
2
MrKay
Senior Member
Posts: 266
2012-05-10, 01:24
(This post was last modified: 2012-05-10, 01:24 by MrKay.)
Thanks jack0w its 1.5v any thing else i need to change
so i set it up 1.500v right
Posts: 266
Joined: Apr 2012
Reputation:
2
MrKay
Senior Member
Posts: 266
Yes the cpu fan is plugged in the socket that is labelled CPU 1
Ok should i set target cpu temperature to 50 *C/122 *F and target fan speed to level 1 then i have chassis fan settings and traget fan speed but above them it says cpu fan 1 & 2 settings automatic mode
Posts: 2,227
Joined: Dec 2010
Reputation:
54
2012-05-10, 01:40
(This post was last modified: 2012-05-10, 01:43 by Beer40oz.)
Look please at my build.... the target is there.... for the cpu fan...
But that is for my BIG SHURIKEN....
My settings on the bios are for the Target CPU temperature is 50c/122F
Target fan speed Level 1
You have to do this to get my temps and speed of fan.
You have the BIG shuriken 2100 RIGHT?
On the 1100 I have
Its 50c/122F Target speed level 3
Posts: 110
Joined: Nov 2011
Reputation:
1
jack0w
Senior Member
Posts: 110
Oh and primary graphics adaptor should be set to onboard.
Hope this helps! Apologies if a bit garbled, am very tired!!
Posts: 266
Joined: Apr 2012
Reputation:
2
MrKay
Senior Member
Posts: 266
saved chassis fan 1 setting to manual and traget fan speed to level 1
Posts: 2,227
Joined: Dec 2010
Reputation:
54
Change RAM V. t from auto to 1.5 thats it
oh share 512MB to graphics card
Posts: 266
Joined: Apr 2012
Reputation:
2
MrKay
Senior Member
Posts: 266
Thank you guys it just shut of gonna wait a bit for it to cool down. i dont know why the cpu temp is so high tho. I have the shuriken 1100