[rebelmaveric19]

Hey Luna, this XML file causes PTV Live to crash due to some other formatting.
I wasn't able to get it to run even by choosing ANSI. The problem lies with channel ID

Code:

www.timefor.tv/tv/221

When I assign a channel this ID, the EPG will be empty for this channel and crash afterwards.
A solution here would be interesting, as probably many other non-english speaking users will want to use PTV.

If you could take a look into the XML file I sent you earlier, maybe you can isolate the problem.
Good luck

Use latest master, setup two channels in ptvl using your epg.xml

send me the setting2.xml, crash log from the two channels....

---

I'm trying to setup a wifi cam stream like this:

<setting id="Channel_8_type" value="9" />
<setting id="Channel_8_1" value="5400" />
<setting id="Channel_8_2" value="rtsp://192.168.1.52:554/mpeg4" />
<setting id="Channel_8_3" value="Baby Monitor" />
<setting id="Channel_8_rulecount" value="1" />
<setting id="Channel_8_rule_1_id" value="1" />
<setting id="Channel_8_rule_1_opt_1" value="Baby Monitor" />

If I put the network address in VLC it works fine but for the life of me cannot get it to work in PTV Live. Did I configure this correctly? Also tried an http stream also and verified it through VLC and no go.

P.S - Thank you lunatiz!! Testing out the capabilities of this plugin and if I can get it working like its meant to, I will diffidently be donating. I dream of plugins like this and just need to learn how to use it to its full potential.

place that link into a txt file, name it baby.strm. Go into xbmc and load baby.strm does it play?

Well I tried making strm files with the rtsp one and xbmc didnt like that but i tried the http one and it brought up the stream so i added that like this:

<setting id="Channel_8_type" value="9" />
<setting id="Channel_8_1" value="5400" />
<setting id="Channel_8_2" value="http://USERNAME:[email protected]:26072/cgi/mjpg/mjpg.cgi" />
<setting id="Channel_8_3" value="Baby Monitor" />
<setting id="Channel_8_rulecount" value="1" />
<setting id="Channel_8_rule_1_id" value="1" />
<setting id="Channel_8_rule_1_opt_1" value="Baby Monitor" />

Annnnndddddd it still didnt work. Things like this drive me nuttttsss. Tried to respond right when you quoted me but the "baby" pushed a button on the av receiver and took me forever to find out what she pushed to make the sound quit working. (shouldn't have built my entertainment center with everything at the bottom)