[Lunatixz]

Hi Luna,

I previously had interleaving working with my youtube channels without issue. But now they won't work at all I don't get the interleaved channels only the original channel works

for example

Code:

<setting id="Channel_3_1" value="TheYoungTurks" />
    <setting id="Channel_3_2" value="1" />
    <setting id="Channel_3_3" value="50" />
    <setting id="Channel_3_rulecount" value="3" />
    <setting id="Channel_3_rule_1_id" value="1" />
    <setting id="Channel_3_rule_1_opt_1" value="TheYoungTurks" />
    <setting id="Channel_3_rule_2_id" value="6" />
    <setting id="Channel_3_rule_2_opt_1" value="52" />
    <setting id="Channel_3_rule_2_opt_2" value="1" />
    <setting id="Channel_3_rule_2_opt_3" value="1" />
    <setting id="Channel_3_rule_2_opt_4" value="1" />
    <setting id="Channel_3_rule_3_id" value="6" />
    <setting id="Channel_3_rule_3_opt_1" value="53" />
    <setting id="Channel_3_rule_3_opt_2" value="1" />
    <setting id="Channel_3_rule_3_opt_3" value="1" />
    <setting id="Channel_3_rule_3_opt_4" value="1" />
    <setting id="Channel_52_type" value="10" />
    <setting id="Channel_52_1" value="townsquare" />
    <setting id="Channel_52_2" value="1" />
    <setting id="Channel_52_3" value="50" />
    <setting id="Channel_52_rulecount" value="2" />
    <setting id="Channel_52_rule_1_id" value="1" />
    <setting id="Channel_52_rule_2_id" value="5" />
    <setting id="Channel_52_rule_1_opt_1" value="townsquare" />
    <setting id="Channel_52_4" value="" />
    <setting id="Channel_53_type" value="10" />
    <setting id="Channel_53_1" value="TYTnation" />
    <setting id="Channel_53_2" value="1" />
    <setting id="Channel_53_3" value="50" />
    <setting id="Channel_53_rulecount" value="2" />
    <setting id="Channel_53_rule_1_id" value="1" />
    <setting id="Channel_53_rule_2_id" value="5" />
    <setting id="Channel_53_rule_1_opt_1" value="TYTnation" />
    <setting id="Channel_53_4" value="" />

Doesn't work, Only The Young Turks plays, and not the 2 interleaved channels (townsquare, and TYTnation)

I enabled debugging and ran through a channel reset, my log is here http://paste.ubuntu.com/7236161/ Sorry about using ubuntu pastebin, but it's the only one that would accept my paste.

You need to try starting clean, remove all old interleaving rules, then reconfigure.
I've been thoroughly testing interleaving and I've experienced no problems...

Better yet, if you could rename setting2.xml (back it up). Start completely clean and configure two channels to interleave, can you tell me if that works for you?
If interleaving works when completely clean, then their is something wrong with your old configuration.

Also enter every settings, verify there is a value set...

There are three known issues that have always been in Pseudotv, even before I forked it...

1. If you are in a channel configuration field and hit backspace to exit the menu, it will backspace over your setting. You need to either use the close button, or select a field that doesn't require a input then backspace.
2. Even tho the box might show a setting, it may not actually be there, you need to enter the configuration, if it's blank you know the setting was never recorded. Basically don't assume a "1" is a "1" enter and check.
3. Once you change a advanced rule, if you back up to the next menu then reenter advanced rule, it might not always show your recent change. You need to completely exit the channel configuration menu selecting "save" along the way.