[Zacharybinx34]

Try manually deleting settings2.xml.

Then go into PTVL settings and check all the clear cache settings.

Then auto-tune again (the community list syntax for a bunch of lists has just been updated so that might have been part of the problem).

---

As for your live tv problem (which I was trying to help you with btw), I believe you need to open your xmltv file and change the channel names to match the correct stream names. I'm no expert on xmltv but if you upload it I can take a look and try to point out what section you need to change.

Based on your settings2.xml channels 1, 3, 9, 10, 14, 19, 27, 28, and 29 should already be matched correctly.

That means 2,4,5,6,7,8,11,13,13,15,16,17,18,20,21,22,23,24,25,26 need to be changed.

I posted it here.

thanks for the help!

https://gist.github.com/anonymous/57eda8bbedff24498e0c

-----
I looked at your settings2.xml, but you never mentioned if you tried the steps above.
-----
I've autotuned the RSS list and replicated the same problem:

<setting id="Channel_104_changed" value="True" />
<setting id="Channel_105_type" value="11" />
<setting id="Channel_105_time" value="2566" />
<setting id="Channel_105_1" value="http://feeds.feedburner.com/hubblecast_sd?format=xml" />
<setting id="Channel_105_2" value="1" />
<setting id="Channel_105_3" value="25" />
<setting id="Channel_105_4" value="0" />
<setting id="Channel_105_rulecount" value="1" />
<setting id="Channel_105_rule_1_id" value="1" />
<setting id="Channel_105_rule_1_opt_1" value="HubbleCast
" />
<setting id="Channel_105_changed" value="False" />

The end of the name setting gets bumped onto a separate line. Regardless the channels still work. To completely fix it you just need to go in settings2.xml and delete the space between the channel name and " />.

FOR LUNA: I would say that there must be a typo in the code that imports the channel name of rss.xml. I looked for it but I'm not sure where I was looking, but I would say that there is an extra space character in the code. That is your code must have something like "Channel Name[space]", where the space should be removed (I might be way off base but that is my best guess.
----------------------------------------------------------------

As to live TV I can't help much more. You are going to need to find and edit your XMLTV file to make sure that the name labels (ex: "MOVIES! LiveTV") match whatever your PVR channel labels are (either that or edit your pvr stream labels to match XMLTV). You'll have to do that for every PVR entry in your settings2.xml that autotuned to chtype 9 instead of chtype 8.

Example (Channel 1 is fine, Channel 2 needs to have the labels for it in XMLTV changed):

<setting id="Channel_1_type" value="8" />
<setting id="Channel_1_time" value="2566" />
<setting id="Channel_1_1" value="I15.28459936.microsoft.com" />
<setting id="Channel_1_2" value="pvr://channels/tv/All TV channels/0.pvr" />
<setting id="Channel_1_3" value="xmltv" />
<setting id="Channel_1_4" value="" />
<setting id="Channel_1_rulecount" value="1" />
<setting id="Channel_1_rule_1_id" value="1" />
<setting id="Channel_1_rule_1_opt_1" value="KMSP LiveTV" />
<setting id="Channel_1_changed" value="False" />
<setting id="Channel_2_type" value="9" />
<setting id="Channel_2_time" value="2566" />
<setting id="Channel_2_1" value="5400" />
<setting id="Channel_2_2" value="pvr://channels/tv/All TV channels/1.pvr" />
<setting id="Channel_2_3" value="Listing Unavailable" />
<setting id="Channel_2_4" value="TV Listing Unavailable, Check your xmltv file" />
<setting id="Channel_2_rulecount" value="1" />
<setting id="Channel_2_rule_1_id" value="1" />
<setting id="Channel_2_rule_1_opt_1" value="BOUNCE LiveTV" />
<setting id="Channel_2_changed" value="False" />

You might wanna send this to Luna as a PM.

Whenever I point out problems, he just ignores it and says its on my end due to not reading instructions. I'd PM it to him, but he legit ignored me for it.

Such silliness....

Looks like I can expect to NOT get a donor login after recently donating..