[aib37]

So i feel like im retarded.

I try to activate community lists with inputting a gmail address. Is this the gmail account i set up with at pseudotvlive.com or just any random one or what? No matter what i enter, it doesnt verify it for me.

Donor activates fine, just cant activate community lists.

Any help?

i made a special user just for that (as luna suggested) and it works ok, i submitted several channels yesterday

When you say you made a special user?

You created a new gmail address and password, input those details into the settings, and it activated?

Ive tried a new email that was not actually a gmail address yet, a throwaway one i have, my regular one, and nothing activates after i click ok. what am i doing wrong?

[aib37]

So i feel like im retarded.

I try to activate community lists with inputting a gmail address. Is this the gmail account i set up with at pseudotvlive.com or just any random one or what? No matter what i enter, it doesnt verify it for me.

Donor activates fine, just cant activate community lists.

Any help?

i made a special user just for that (as luna suggested) and it works ok, i submitted several channels yesterday

When you say you made a special user?

You created a new gmail address and password, input those details into the settings, and it activated?

Ive tried a new email that was not actually a gmail address yet, a throwaway one i have, my regular one, and nothing activates after i click ok. what am i doing wrong?

I think im doing everything correctly, but its not activating anything and i cant access any community list features... Any assistance?

[bornagainpenguin]

Do you automatically get logs submitted via program settings or do we manually need to log in to the email and post the link in the bug thread? Asking to avoid spamming you with logs. Asking again because I edited it in the previous post and you may have missed it the first time.

[Lunatixz]

i made a special user just for that (as luna suggested) and it works ok, i submitted several channels yesterday

When you say you made a special user?

You created a new gmail address and password, input those details into the settings, and it activated?

Ive tried a new email that was not actually a gmail address yet, a throwaway one i have, my regular one, and nothing activates after i click ok. what am i doing wrong?

I think im doing everything correctly, but its not activating anything and i cant access any community list features... Any assistance?

You need to read through the forum!!, just 1 page back I posted that I temp disabled Com/donor stuff

Do you automatically get logs submitted via program settings or do we manually need to log in to the email and post the link in the bug thread? Asking to avoid spamming you with logs. Asking again because I edited it in the previous post and you may have missed it the first time.

when you submit using the log upload tool... you will be prompted with the id you need to post on the forum. If you provide email info, you get sent the info via mail.

remember to post detailed information about the problem... along with the post of the log.

[bacontaco]

Is it just me, or does it automatically unpause after a second or two after pausing for anyone else? I just updated to the latest version this afternoon, which is when I started noticing this. It doesn't happen when playing media through the normal Kodi interface, just with PseudoTV. I figured I would check to see if this was happening to anyone else before posting a log and all that. Thanks!

[Lunatixz]

Is it just me, or does it automatically unpause after a second or two after pausing for anyone else? I just updated to the latest version this afternoon, which is when I started noticing this. It doesn't happen when playing media through the normal Kodi interface, just with PseudoTV. I figured I would check to see if this was happening to anyone else before posting a log and all that. Thanks!

fix in next update...

[bacontaco]

Is it just me, or does it automatically unpause after a second or two after pausing for anyone else? I just updated to the latest version this afternoon, which is when I started noticing this. It doesn't happen when playing media through the normal Kodi interface, just with PseudoTV. I figured I would check to see if this was happening to anyone else before posting a log and all that. Thanks!

fix in next update...

Sounds good, thanks again!

[ARYEZ]

Possibly this should be in the feature request forum, so I'll apologize ahead of time if it belongs there...

@Lunatixz

I see that we have the option within the GUI to autostart PTVL when Kodi launches, but are there any plans to possibly add the ability to launch PTVL at a specific time? Essentially so it could be used as an alarm clock? Now that I have CEC working between my TV and HTPC I can use the KODI Alarm clock addon to wake up to music, but I just think waking up to PTVL seems much better...any plans to add this down the line?

[tommymsw]

PseudoTv live fails on start for me. Log says:

Code:

16:45:56 T:6336   ERROR: EXCEPTION Thrown (PythonToCppException) : -->Python callback/script returned the following error<--
                                             - NOTE: IGNORING THIS CAN LEAD TO MEMORY LEAKS!
                                            Error Type: <type 'exceptions.ImportError'>
                                            Error Contents: No module named lib.Globals
                                            Traceback (most recent call last):
                                              File "C:\Users\Bryant\AppData\Roaming\XBMC\addons\script.pseudotv.live-master\default.py", line 22, in <module>
                                                from resources.lib.Globals import *
                                            ImportError: No module named lib.Globals
                                            -->End of Python script error report<--

I have the exact error on a new install of 13.1 and pseudotv live 4.4. The only change from default is I use an existing mysql database.

Same problem for me. Just started happening. Did either of you figure it out?

[wrichards]

@luna

Just out of curiosity what do you use for a controller in the living room? Seems to be my biggest hurdle to overcome finding something that "fits".

Go buy a flirc from flirc.TV or Amazon. You can use any existing remote.l with them.

Glad this came up. ordered the flirc. was using a bluetooth remote as i like not having line o sight, but tired of waking up the remote with two clicks before getting the action i want. Also glad to hear Luna is using a cable remote, I want to get as close to his setup as posible to avoid conflicts. Now that i know the mouse is in conflict will be focusing on default skin + remote set being 100% before working again with my custome skin. must be a real bear to try to conform to all the possible hardwares out there. Ill focus on PC and RPI for now..

all in all this frigen program rox hard, having a fun time with it, thanks again (seriously) Luna this roxs

[Pete1989]

Has anybody tried PSTV on an nvidia TV?

[Jandraakovic]

hi fellow Pseudotv users. I reaally need help here

Since the start of using ptv i have an issue which i think is very strange. So far i have found a few hints on what the problem might be. My issue right now is:

When program my channels and lets say put in a plugin like dumpert (dutch video plugin) or worldstar hiphop plugin which both use short videos as content. The ptv epg tends to set a 60 minute block for each video. This results in the constant looping of a video with a runtime of 5 min. So it loops the 5min vid for 60 minutes. This is not what i want and i cant understand why ptv doesnt see this. I set short videos setting to OFF. The only plugin that works is vice which usually has long vids but also the shorter vids are STACKED and played after eachother in stead of looped. I think this has to do with the way the plugin puts out the video lenght in nfo format or something and sends the correct runtime to ptv

Hints i found:

- runtime isnt correctly given by the plugin
- ptv doesnt support my plugins.

Anyone knows a solution?
Ita maybe possible to make a playlist for the vids in my plugin and add it to the channel epg. But this is a weird workaround and i cant even add plugins to a smart playlist.

Is it me or is this a huge overlooked problem. Pls help asap

Cheers

[Lunatixz]

hi fellow Pseudotv users. I reaally need help here

Since the start of using ptv i have an issue which i think is very strange. So far i have found a few hints on what the problem might be. My issue right now is:

When program my channels and lets say put in a plugin like dumpert (dutch video plugin) or worldstar hiphop plugin which both use short videos as content. The ptv epg tends to set a 60 minute block for each video. This results in the constant looping of a video with a runtime of 5 min. So it loops the 5min vid for 60 minutes. This is not what i want and i cant understand why ptv doesnt see this. I set short videos setting to OFF. The only plugin that works is vice which usually has long vids but also the shorter vids are STACKED and played after eachother in stead of looped. I think this has to do with the way the plugin puts out the video lenght in nfo format or something and sends the correct runtime to ptv

Hints i found:

- runtime isnt correctly given by the plugin
- ptv doesnt support my plugins.

Anyone knows a solution?
Ita maybe possible to make a playlist for the vids in my plugin and add it to the channel epg. But this is a weird workaround and i cant even add plugins to a smart playlist.

Is it me or is this a huge overlooked problem. Pls help asap

Cheers

Huge overlooked problem for whom?

Sounds like you need to contact the developers of the video plugins, ask that they included accurate duration information with their list items.

Runtime can't be faked... PTVL needs to know how long an episode might be....

As for smartplaylists, Kodi only supports media from its database.

[Lunatixz]

PseudoTv live fails on start for me. Log says:

Code:

16:45:56 T:6336   ERROR: EXCEPTION Thrown (PythonToCppException) : -->Python callback/script returned the following error<--
                                             - NOTE: IGNORING THIS CAN LEAD TO MEMORY LEAKS!
                                            Error Type: <type 'exceptions.ImportError'>
                                            Error Contents: No module named lib.Globals
                                            Traceback (most recent call last):
                                              File "C:\Users\Bryant\AppData\Roaming\XBMC\addons\script.pseudotv.live-master\default.py", line 22, in <module>
                                                from resources.lib.Globals import *
                                            ImportError: No module named lib.Globals
                                            -->End of Python script error report<--

I have the exact error on a new install of 13.1 and pseudotv live 4.4. The only change from default is I use an existing mysql database.

Same problem for me. Just started happening. Did either of you figure it out?

When u say 4.4 you mean 6.4?

Post a proper debug log in the bug thread.... Otherwise I can't help you any further.

[Jandraakovic]

hi fellow Pseudotv users. I reaally need help here

Since the start of using ptv i have an issue which i think is very strange. So far i have found a few hints on what the problem might be. My issue right now is:

When program my channels and lets say put in a plugin like dumpert (dutch video plugin) or worldstar hiphop plugin which both use short videos as content. The ptv epg tends to set a 60 minute block for each video. This results in the constant looping of a video with a runtime of 5 min. So it loops the 5min vid for 60 minutes. This is not what i want and i cant understand why ptv doesnt see this. I set short videos setting to OFF. The only plugin that works is vice which usually has long vids but also the shorter vids are STACKED and played after eachother in stead of looped. I think this has to do with the way the plugin puts out the video lenght in nfo format or something and sends the correct runtime to ptv

Hints i found:

- runtime isnt correctly given by the plugin
- ptv doesnt support my plugins.

Anyone knows a solution?
Ita maybe possible to make a playlist for the vids in my plugin and add it to the channel epg. But this is a weird workaround and i cant even add plugins to a smart playlist.

Is it me or is this a huge overlooked problem. Pls help asap

Cheers