•   
  • 1
  • 176
  • 177
  • 178(current)
  • 179
  • 180
  • 244
  •   
  Thread Closed
Linux Radeon OSS with vdpau (howto)
Yeah - it won't get better as that :-)

50fps @ 1080p is the bare maximum an E350 can do.
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
(2014-04-28, 09:57)wsnipex Wrote: scroll down to the bottom in the video settings OSD(where you set deinterlace to Auto)

Thanks!
(2014-04-27, 22:15)kriticar Wrote: Hi,

I have just installed xubuntu 14.04, and followed the procedure described on the first page of this thread.

...

3. in my dual monitor setup with 23" lcd monitor and 42" Panasonic plasma (reported as "Panasonic 32"" in xcfe, btw motherboard e350, RAM 4 GB ), when playing xbmc on panasonic I don't see the whole picture. If I open firefox in full screen, I cannot se the file menu (the picture starts with Edit menu), and I cannot see the title bar. The same is with the bottom of the screen as well.
On panasonic, overscan is turned off. I read in the previous posts that xrandr could be used as a solution, but I haven't tried it yet.

The same setup works with no problem with xubuntu 12.04 and glrfx drivers.

I ought to admit that I have mistakenly reported this problem.
Someone in my house (I am still interrogating all of them in order to... Smile) has changed aspect ratio on the tv.
This problem existed only in my head. Sorry for misreporting.

Regards.
(2014-04-28, 00:20)locomot1f Wrote: @Endeavour, you are like me with the sensors.

for some reason ours is backwards -- the k10temp comes first. but the provided advancedsetting.xml is set for if the radeon-pci is first.

here's mine:
Code:
<cputempcommand>sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*/\1 C/p}'</cputempcommand>
<gputempcommand>sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*radeon.*/\1 C/p}'</gputempcommand>

Thank you. But this doesn't work anymore;;
Output below:

Code:
[email protected]:~/testar$ sensors
radeon-pci-0008
Adapter: PCI adapter
temp1:        +68.0°C  (crit = +120.0°C, hyst = +90.0°C)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +67.8°C  (high = +70.0°C)
                       (crit = +100.0°C, hyst = +97.0°C)

[email protected]:~/testar$ sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*/\1 C/p}'
radeon-pci-0008
Adapter: PCI adapter
temp1:        +68.0°C  (crit = +120.0°C, hyst = +90.0°C)

+67 C
[email protected]:~/testar$ sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*radeon.*/\1 C/p}'
[email protected]:~/testar$
Hello. I have a e350-based nettop connected to the Panasonic plasma 42" via Denon receiver. Something wrong with detecting tv-resolutions. When i had add new modeline to xorg.conf i've got overscanned [email protected] but loose any sound. Soz i'am not native English and newbee at all. Thanks in advance!

dmesg | pastebinit
http://paste.ubuntu.com/7358442/

cat /var/log/Xorg.0.log | pastebinit
http://paste.ubuntu.com/7358478/

DISPLAY=:0 vdpauinfo | pastebinit
http://paste.ubuntu.com/7358480/

pkg -l |grep mesa | pastebinit
http://paste.ubuntu.com/7358483/
Yeah, again a Denon that makes trouble:
Quote: [ 4555.409817] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID

Head over to bugs.freedesktop.org please and try to file that bug accordingly. You can test my 3.14.2 kernel from some pages back.
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
(2014-04-29, 10:04)Endeavour79 Wrote:
(2014-04-28, 00:20)locomot1f Wrote: @Endeavour, you are like me with the sensors.

for some reason ours is backwards -- the k10temp comes first. but the provided advancedsetting.xml is set for if the radeon-pci is first.

here's mine:
Code:
<cputempcommand>sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*/\1 C/p}'</cputempcommand>
<gputempcommand>sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*radeon.*/\1 C/p}'</gputempcommand>

Thank you. But this doesn't work anymore;;
Output below:

Code:
[email protected]:~/testar$ sensors
radeon-pci-0008
Adapter: PCI adapter
temp1:        +68.0°C  (crit = +120.0°C, hyst = +90.0°C)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +67.8°C  (high = +70.0°C)
                       (crit = +100.0°C, hyst = +97.0°C)

[email protected]:~/testar$ sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*/\1 C/p}'
radeon-pci-0008
Adapter: PCI adapter
temp1:        +68.0°C  (crit = +120.0°C, hyst = +90.0°C)

+67 C
[email protected]:~/testar$ sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*radeon.*/\1 C/p}'
[email protected]:~/testar$

Why not pass the argument to sensors ? I have the same problem. Not only that. It can't pick up the CPU temperature as well if I simply copy and paste the one in OP (there is an extra 'Temp' in my output)

[email protected]:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0°C (crit = +100.0°C)

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +33.0°C
Core1 Temp: +33.0°C

radeon-pci-0300
Adapter: PCI adapter
temp1: +34.5°C (crit = +120.0°C, hyst = +90.0°C)

[email protected]:~$ sensors radeon-pci-0300
radeon-pci-0300
Adapter: PCI adapter
temp1: +35.0°C (crit = +120.0°C, hyst = +90.0°C)

[email protected]:/home/xbmc$ sensors radeon-pci-0300|sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"
44 C
I use this one on my e350:

<cputempcommand>sensors k10temp-pci-00c3 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</cputempcommand>
<gputempcommand>sensors radeon-pci-0008 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</gputempcommand>
(2014-04-29, 13:05)fritsch Wrote: You can test my 3.14.2 kernel from some pages back.
Now i am on 3.14.2-amdfixes5+ and your marantz edid. Works fine after switching resolutions in XBMC interface.

Also a have a very noob question - any idea how to stop then start XBMC gently through SSH because my nettop using as Apple Time Machine, torrent-box and for power saving?
sudo service xbmc stop
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
(2014-04-29, 13:35)Ectholian Wrote: I use this one on my e350:

<cputempcommand>sensors k10temp-pci-00c3 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</cputempcommand>
<gputempcommand>sensors radeon-pci-0008 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</gputempcommand>

Thanks!
(2014-04-29, 13:35)Ectholian Wrote: I use this one on my e350:

<cputempcommand>sensors k10temp-pci-00c3 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</cputempcommand>
<gputempcommand>sensors radeon-pci-0008 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</gputempcommand>

i do like this better! much cleaner syntax!
well done Nod
Linux Mint 18 LTS 64-bit - Kodi 17 Beta6
Odroid-C2 - Libreelec v7.90.009
It's just a copy/paste from the first post; i only added the sensor parameters for cpu and gpu. A lot easier than trying to make a regex working for everything Smile
how can i update to trusty?

Only with "sudo do release-upgrade" or is a fresh install better?
ppa-purge all the added repositories first
then do the release-upgrade
then readd the ppas and just run the first apt-get install command again.

New installation is simpler, yes.
First decide what functions / features you expect from a system. Then decide for the hardware. Don't waste your money on crap.
  •   
  • 1
  • 176
  • 177
  • 178(current)
  • 179
  • 180
  • 244
  •   
  Thread Closed
 
Thread Rating:
  • 26 Vote(s) - 4.58 Average



Logout Mark Read Team Forum Stats Members Help
Radeon OSS with vdpau (howto)4.5826