2013-12-17, 17:43
I wanted to report success in 3.13-rc4 with my setup.. I had to build from source since the mainline ppa is broken at the moment due to a code issue in a specific driver they compile. I also changed to the test mesa PPA a few days ago with success in 3.13-rc3 and now with 3.13-rc4 it is working just as good.
My setup:
My setup:
Code:
System: Host: denhtpc Kernel: 3.13.0-rc4-custom x86_64 (64 bit) Console: tty 0 Distro: Ubuntu 13.10
Machine: Mobo: ASRock model: A75M-ITX Bios: American Megatrends version: P1.60 date: 05/29/2012
CPU: Triple core AMD A6-3500 APU with Radeon HD Graphics (-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4a svm)
Clock Speeds: 1: 1600.00 MHz 2: 800.00 MHz 3: 800.00 MHz
Graphics: Card: Advanced Micro Devices [AMD/ATI] BeaverCreek [Radeon HD 6530D]
X.org: 1.14.3 drivers: ati,radeon (unloaded: fbdev,vesa) tty size: 150x25 Advanced Data: N/A out of X
Audio: Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel
Card-2: Advanced Micro Devices [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture ver: k3.13.0-rc4-custom
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 00:25:22:f5:5b:4d
Drives: HDD Total Size: 60.0GB (9.0% used) 1: id: /dev/sda model: Patriot_Pyro size: 60.0GB
Partition: ID: / size: 47G used: 5.0G (12%) fs: ext4 ID: /boot size: 237M used: 50M (22%) fs: ext2
ID: swap-1 size: 8.30GB used: 0.00GB (0%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 8.6C mobo: N/A gpu: 8.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 123 Uptime: 16 min Memory: 258.4/7711.5MB Runlevel: 2 Client: Shell (bash) inxi: 1.9.12