2013-11-18, 13:35
First thing u need to do is log on your NUC via ssh and generate a Startup Script as
described here :
http://wiki.openelec.tv/index.php?title=Autostart.sh
Here is step by step how to do it on a Mac..
Go to the Terminal, from there type :
ssh [email protected] (IP of ur NUC)
Then it will ask u for the password, which is : openelec
You should be logged in now.
Then type like stated in the Guide above :
echo "#!/bin/sh" > /storage/.config/autostart.sh && chmod +x /storage/.config/autostart.sh
This command makes the autostart.sh available and puts it in the right directory.
Next Command then is :
nano /storage/.config/autostart.sh
This should open up a new window (The Autostart.sh).
In the first line u should see :
#!/bin/sh
Under this u write this command :
DISPLAY=:0 xrandr --output HDMI1 --set "Broadcast RGB" "Full"
So in the End it should look like this :
#!/bin/sh
DISPLAY=:0 xrandr --output HDMI1 --set "Broadcast RGB" "Full"
Then Press CTRL+X, it will ask to safe, type Y (yes) and then press enter.
Now u should be back in the Terminal, still logged on ur Nuc....just Type "exit"
and close the Terminal.
Reboot ur NUC now and black should be (too) black again.
described here :
http://wiki.openelec.tv/index.php?title=Autostart.sh
Here is step by step how to do it on a Mac..
Go to the Terminal, from there type :
ssh [email protected] (IP of ur NUC)
Then it will ask u for the password, which is : openelec
You should be logged in now.
Then type like stated in the Guide above :
echo "#!/bin/sh" > /storage/.config/autostart.sh && chmod +x /storage/.config/autostart.sh
This command makes the autostart.sh available and puts it in the right directory.
Next Command then is :
nano /storage/.config/autostart.sh
This should open up a new window (The Autostart.sh).
In the first line u should see :
#!/bin/sh
Under this u write this command :
DISPLAY=:0 xrandr --output HDMI1 --set "Broadcast RGB" "Full"
So in the End it should look like this :
#!/bin/sh
DISPLAY=:0 xrandr --output HDMI1 --set "Broadcast RGB" "Full"
Then Press CTRL+X, it will ask to safe, type Y (yes) and then press enter.
Now u should be back in the Terminal, still logged on ur Nuc....just Type "exit"
and close the Terminal.
Reboot ur NUC now and black should be (too) black again.