[User 203163]

Is there any way I can disable fiq_fsm?

I just reinstalled both my Rpi's with 0308 from scratch, with formatted SDCARDS.

Now I can't upload files larger than 500Mb from PC to the directly connected WD-2TB usb-hdd. In the middle of the copy the network interface on the RPi dies, no ssh, no ping.
On the TV everyting looks ok and I can play movies from the usb-hdd so that one is still mounted ok. But network does not work until I reboot using the remote.

I then tried inserting:
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 dwc_otg.fiq_enable=0 dwc_otg.fiq_fsm_enable=0 ssh quiet

But then I get no IP or anything network related when I boot up. Tried "Wait for network" to 30 seconds, but same result.


If I use a fresh installed 0304 sdcard everything works ok, that is if I don't enable fiq_fsm. If I do I get the same strange network disconnect when copying files from PC.

I'm using wired nic, confluence skin, no pvr, no addons, everything default, no wifi dongle, only CEC-remote. Same on both my RPi's

My settings are (and have been using for several months)

cmdline.txt
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ssh quiet

config.txt
gpu_mem=256

arm_freq=950
core_freq=450
sdram_freq=500
over_voltage=2
force_turbo=1
initial_turbo=30

hdmi_ignore_cec_init=1
hdmi_force_hotplug=1

decode_MPG2=0xmyown
decode_WVC1=0xmyown


Am I missing something??