OpenELEC Testbuilds for RaspberryPi Part 2
(2014-03-18, 15:01)popcornmix Wrote:
(2014-03-18, 14:45)b1m1 Wrote: These are all generated after a reboot, going into movies and then just paging up and down the list until it hangs i.e it is reproducable

There's not much useful in the log as openelec doesn't build the kernel with backtrace.
Can you narrow it down?
Try with overclock disabled.
Try with any USB devices disconnected
If using a sound card module, try without it.
Try with dwc_otg.fiq_fsm_enable=0 in cmdline.txt

Updated to 319

With overclock disabled and dwc_otg.fiq_fsm_enable=0 cannot reproduce.
With overclock disabled and dwc_otg.fiq_fsm_mask=0 cannot reproduce.
With overclock and dwc_otg.fiq_fsm_mask=0 cannot reproduce.

Rolled back to 315
With overclock and dwc_otg.fiq_fsm_mask=0 get the Oops hang.
With no overclock and dwc_otg.fiq_fsm_mask=0 get this below, but no Oops hang.

27.581244] ------------[ cut here ]------------
[ 27.581317] WARNING: CPU: 0 PID: 366 at drivers/misc/vc04_services/interface/vchiq_arm/vchiq_arm.c:2386 vchiq_release_internal+0xc0/0x26c()
[ 27.581332] Modules linked in: fuse snd_soc_bcm2708_i2s regmap_mmio snd_soc_wm8804 snd_soc_wm8731 snd_soc_core snd_compress regmap_i2c snd_pcm_dmaengine regmap_spi snd_pcm bcm2708_dmaengine snd_page_alloc virt_dma snd_timer snd lirc_rpi© lirc_dev rc_core
[ 27.581421] CPU: 0 PID: 366 Comm: HTV Notify Tainted: G WC 3.13.6 #1
[ 27.581434] Backtrace:
[ 27.581480] [<c00113d0>] (dump_backtrace+0x0/0x10c) from [<c00116a8>] (show_stack+0x18/0x1c)
[ 27.581494] r6:c043fb5c r5:00000009 r4:00000000 r3:00000000
[ 27.581540] [<c0011690>] (show_stack+0x0/0x1c) from [<c05fe96c>] (dump_stack+0x20/0x28)
[ 27.581567] [<c05fe94c>] (dump_stack+0x0/0x28) from [<c001dadc>] (warn_slowpath_common+0x70/0x90)
[ 27.581592] [<c001da6c>] (warn_slowpath_common+0x0/0x90) from [<c001dba0>] (warn_slowpath_null+0x24/0x2c)
[ 27.581604] r8:c221de10 r7:c6e900c8 r6:c221c000 r5:c0a71fa8 r4:c79ad244
[ 27.581645] [<c001db7c>] (warn_slowpath_null+0x0/0x2c) from [<c043fb5c>] (vchiq_release_internal+0xc0/0x26c)
[ 27.581674] [<c043fa9c>] (vchiq_release_internal+0x0/0x26c) from [<c044066c>] (vchiq_ioctl+0x664/0x1600)
[ 27.581712] [<c0440008>] (vchiq_ioctl+0x0/0x1600) from [<c00c06d4>] (do_vfs_ioctl+0x400/0x5e8)
[ 27.581739] [<c00c02d4>] (do_vfs_ioctl+0x0/0x5e8) from [<c00c08fc>] (SyS_ioctl+0x40/0x6c)
[ 27.581769] [<c00c08bc>] (SyS_ioctl+0x0/0x6c) from [<c000e580>] (ret_fast_syscall+0x0/0x30)
[ 27.581782] r8:c000e704 r7:00000036 r6:b6d021b8 r5:b64773c4 r4:b6d01990
[ 27.581808] ---[ end trace 2194027e52188e2d ]---
[ 27.581826] vchiq: vchiq_ioctl: cmd VCHIQ_IOC_RELEASE_SERVICE returned error -1 for service TVNT:326

With no overclock and dwc_otg.fiq_fsm_enable=0 could not reproduce.
With overclock and dwc_otg.fiq_fsm_enable=0 could not reproduce.

Changed back to 319

With overclock and dwc_otg.fiq_fsm_enable=0 could not reproduce.
With overclock only could not reproduce.

So, problem seems to be resolved in v319 but was relasted to dwc_otg.fiq_fsm_mask=0 in v315.

Will monitor and report back if I can reproduce in v319

Thanks for your help


Messages In This Thread
RE: OpenELEC Testbuilds for RaspberryPi Part 2 - by b1m1 - 2014-03-19, 16:15
AW: RE: - by DieterLumpen - 2013-07-29, 20:50
include guires switch? - by hpbaxxter - 2013-08-01, 21:46
RE: dual audio?? - by pootler - 2013-08-03, 17:13
Help, watch 3D Film on Non 3D TV - by unix72 - 2013-08-09, 12:39
Remote Controllers - by tfft - 2013-08-14, 09:11
rbej repeatable crash - by RichG - 2013-08-19, 12:43
New Tester - by theneverstill - 2013-10-03, 17:16