2014-03-23, 22:03
(2014-03-23, 21:16)stuCONNERS Wrote: is cron working for other people on these builds?
Yep, just tested it - works fine. Make sure there isn't an error in your cron job configuration or the job itself.
(2014-03-23, 21:16)stuCONNERS Wrote: is cron working for other people on these builds?
# uname -a
Linux rpi512 3.13.6 #1 PREEMPT Sun Mar 23 19:24:43 GMT 2014 armv6l GNU/Linux
# vcgencmd version
Mar 19 2014 23:26:47
Copyright (c) 2012 Broadcom
version 98eb97cd0061f2fcff808fe5f32f851d5eada1ee (tainted) (release)
# lsb_release
OpenELEC (Milhouse) - Version: devel-20140323195651-r17998-g56d655f
<advancedsettings>
<video>
<defaultplayer>dvdplayer</defaultplayer>
<defaultdvdplayer>dvdplayer</defaultdvdplayer>
</video>
</advancedsettings>
no_hdmi_resample=1
hdmi_stream_channels=1
dwc_otg.fiq_fsm_mask=0x7
(2014-03-24, 00:09)MaxiMillion Wrote:(2014-03-23, 22:56)MilhouseVH Wrote:How can I update to tvheadend-3.9.467? I'm running 3.9.383 but when I "update", tvheadend downgrades to 3.4.27.
- tvheadend: update to tvheadend-3.9.467
(2014-03-24, 18:46)luksol Wrote: Is there a difference in performance between this build and OpenELEC Frodo build?
gpu_mem=128
gpu_mem_512=256
arm_freq=900
core_freq=333
sdram_freq=450
over_voltage=2
force_turbo=0
initial_turbo=30
hdmi_force_hotplug=1
hdmi_force_edid_audio=1
#no_hdmi_resample=1
#hdmi_stream_channels=1
hdmi_drive=2
hdmi_mode=5
config_hdmi_boost=4
#hdmi_ignore_edid=0xa5000080
decode_MPG2=0xxxxxxxxx
<advancedsettings>
<showexitbutton>false</showexitbutton>
<destroywindowcontrols>false</destroywindowcontrols>
<fanartres>540</fanartres>
<imageres>256</imageres>
<bginfoloadermaxthreads>2</bginfoloadermaxthreads>
<useddsfanart>false</useddsfanart>
<video>
<defaultplayer>omxplayer</defaultplayer>
<defaultdvdplayer>omxplayer</defaultdvdplayer>
</video>
<network>
<cachemembuffersize>2621440</cachemembuffersize>
<alwaysforcebuffer>0</alwaysforcebuffer>
<limitcacherate>false</limitcacherate>
<curlclienttimeout>30</curlclienttimeout>
</network>
</advancedsettings>
(2014-03-24, 20:47)popcornmix Wrote:(2014-03-24, 20:44)bladel Wrote: DTS with my Yamaha RX-V 673 via HDMI passtrough is not working on the latest MilhouseVH builds.
Are you sure it's enabled in audio settings?
If it is, then pose a debug log.
<audiooutput>
<ac3passthrough>true</ac3passthrough>
<ac3transcode>false</ac3transcode>
<audiodevice>PI:HDMI</audiodevice>
<channels>1</channels>
<config>2</config>
<dtshdpassthrough>false</dtshdpassthrough>
<dtspassthrough>false</dtspassthrough>
<dualaudio>false</dualaudio>
<eac3passthrough>false</eac3passthrough>
<guisoundmode>1</guisoundmode>
<normalizelevels>true</normalizelevels>
<passthrough>true</passthrough>
<passthroughdevice>PI:HDMI</passthroughdevice>
<processquality>30</processquality>
<samplerate>48000</samplerate>
<stereoupmix>false</stereoupmix>
<streamsilence>-1</streamsilence>
<truehdpassthrough>false</truehdpassthrough>
</audiooutput>
(2014-03-24, 22:14)bladel Wrote: yes it is enabled. log:
http://pastebin.com/aaPGtU9e
could the guisettings.xml be the problem? removed the audiooutput part, but it keeps coming back like this:
Code:<dtspassthrough>false</dtspassthrough>