2014-05-20, 19:25
Don't be a NUClehead. DIY FTW!
Now stop messin' in my thread all of you!
Now stop messin' in my thread all of you!
(2014-05-20, 18:45)fritsch Wrote: from the log it even uses 6x6 convolution shader with an intermediate target ... do you see a visible difference between "lanczos3" and "bilinear"?
(2014-05-20, 16:17)trsqr Wrote: Your 576i sample: I get around 43-50 (mostly around 47) fps and screen tearing (log).
Quote:EDIT: I also tested the Deinterlance method: VAAPI Motion Adaptive on the 576i video as you requested with the advanced config. It worked fine, the FPS stayed at 50 without any noticeable drawbacks.
The 1080i example performs the same as previous with VAAPI BOB. Freezes, drops and so on.
(2014-05-21, 13:09)cpuser Wrote: Hi,
Do you know with certainty if J1900 supports SSE? In this Intel data sheet http://ark.intel.com/it/products/78867/I...o-2_42-GHz isn't specified, but here http://www.cpu-upgrade.com/CPUs/Intel/Ce...J1900.html SSE (1,2,3 and 4) are present.
(2014-05-21, 11:54)lewzer Wrote: Owners of Q1900-ITX or similar, what temperatures do you get on idle and full load? I've noticed that my Q1900-ITX gets quite hot even in idle - ~61C (after the night of XMBC on, idling) and after an hour of playing blue-ray movie to 80C+. The room temperature is about 21C and there isn't any of airflow going around the room since all windows are closed, however, to comensate that I keep the top lid of case open. The heatsink gets really hot to the touch. The case that I use: http://www.minicase.net/product_E-I5.html
Installed like so: http://i.imgur.com/JCburUF.jpg
Setup: 2x2gb 1.5V ram, 320gb HDD, pci-e wifi card (unused), 60W PSU.
I do not think it should be getting THAT HOT, how about your setups?
In other areas everything works beautifully, the performance is really awesome.
(2014-05-21, 13:27)fritsch Wrote: Here is another test-image: https://dl.dropboxusercontent.com/u/5572...1fdec9.tar - That one should fix at least the tearing.