Posts: 12
Joined: Oct 2011
Reputation:
0
We all use (6 systems so far) Tevii S480 v1/v2 pcie x2 on different "servers" with hp n54l (turion) and intel i5 / i7 and latest intel xeon. all systems have software raid up to 20TB pooled with mdadm raid1.
Posts: 12
Joined: Oct 2011
Reputation:
0
2014-07-16, 21:45
(This post was last modified: 2014-07-16, 21:50 by b.letas.)
We have 12.4, 12.10 and 13.04 (most systems) running 3.8.0-33-generic x86_64. Doesn't point to cards and hardware for me. There is some newish firmware stuff available from tevii site but I really don't think this will do the job..
What did the FernetMenta find out so far?
Found FernetMenta and the thread
Posts: 464
Joined: Dec 2011
Reputation:
0
will test it with openelec . tried mldhd but it's to much pain to get hd channels working..
Posts: 464
Joined: Dec 2011
Reputation:
0
ok, I'm running out of ideas:
Took an OpenElec Live System, connected to smargo via network instead of local easymouse ... same errors
It's not the os, it's not the cardreader, since we are the only guys with that problem it's most likely not tvheadend, it's not the lnb, cable or something else since standalone sat receiver works .. we both use different DVB-S2 cards .. what the hell is going on ..
the only thing I didn't change is the HD+ card .. will try another, will try to update mine in a sat receiver ..
Posts: 12
Joined: Oct 2011
Reputation:
0
We have HD01 and HD02. Same thing in both. Yes, please try an update via Receiver. We don't have one
Posts: 464
Joined: Dec 2011
Reputation:
0
bad or good news: tested channels with a cs line ..same errors ! .. it's definitely not the card or cwc. So what is left ? if we exclude everything, that we don't have in common only tvheadend is left as error source. must try a different backend ..
Posts: 12
Joined: Oct 2011
Reputation:
0
Searched hours to find another dvb-s card in my men's cave. No success. I'd really like to try mldhd but my wife kills me if I touch the "running" system.
Posts: 815
Joined: Apr 2010
Reputation:
338
_BJ1
Posting Freak
Posts: 815
I've had same issues from one day to another. RTL-Group must have changed some things in their streams because this only happens on their streams. Solution was an update of tvheadend from 3.4.xxx to 3.9.570 (note that is not the latest version as thus is very unstable). All continue errors are gone so this is not in a affect of the dvb-s card. Errors are back with version 3.9.400 by the way so something must be updated/corrected between .400 and .570. The biggest challenge was the migration of settings from 3.4 to 3.9 but there is a migration script that changes the settings - or you start at zero.
Posts: 464
Joined: Dec 2011
Reputation:
0
Thanks for the link .. will give it a try !
Posts: 12
Joined: Oct 2011
Reputation:
0
Hey,
For some reason all artefacts are gone without changing anything on my side. Can anyone confirm?
brgds