2018-03-10, 18:59
Here is what I do. It is different than what others suggest and I am in the wrong forum but just trying to help you so you quit writing that things don't work and so and so is to blame. Do exactly this. If it doesn't work for you too, then change back to what semi works for you and you'll have to sort out the rest on your own. Don't assume you can change or omit something because it doesn't apply to you.
Player settings/Videos:
Make sure the setting in KODI is checked for 'use a fullscreen window'.
Make sure the setting in KODI is checked for 'Match refresh rates'.
Make sure the setting in KODI is unchecked for 'sync playback to display'.
Makes sure the setting in KODI is unchecked for 'minimize black bars'.
Make sure the setting in KODI is checked for 'allow hardware acceleration for DXVA2'.
Make sure the setting in KODI is set to 2160p resolution and that in Nvidia control panel resolution it is also set to 2160p 60Hz.
Use NVidia driver 385.69 clean installed meaning prior to installing, existing driver is a generic MS that installed during reboot after uninstalling the driver and software and tuned Windows not to auto download drivers or apps explained in detail to you earlier.
Player settings/Discs:
Bluray playback mode is 'Show simplified menu'.
In MPC-BE, 'Play tab at top', select 'after playback'. Select 'do nothing' for the 'once' area. Then 'Exit' in the 'every time' area.
Under options/video/fullscreen, check Launch files in fullscreen. Under 'fullscreen monitor' select 'current'. Uncheck 'use autochange fullscreen'.
Under options External filters. Select LAV audio decoder, splitter, splitter source and video decoder. Set them to 'Prefer'. Also select madVR and set to prefer. In the 'video' tab select madVR as the renderer.
Install LAV filters even though you think you don't need them. Use D3D11/automatic. Check all the resolutions and use 'ordered dithering'.
Use x64 LAV filters and MPC-BE latest nightlies provided your PC is x64. KODI official 17.6 x86.
In madVR 0.92.12:
Devices/display connected to your AVR expand to display modes. Check switch to matching display mode when player goes fullscreen. Check restore original display mode when player is closed. In 'list all display modes madvr may switch to: copy and paste this and don't change or add anything:
2160p23, 2160p24, 2160p25, 2160p59, 2160p60
In the rendering/general settings tab, check everything except delay playback... and enable windowed overlay....
Dithering tab is 'ordered'.
Use one of my playercorefactory.xml's and the .bat(s) if things still don't work using your own. I am certain following these directions explicitly will perform 100% of basic setup for you using your NVidia 1050Ti.
Player settings/Videos:
Make sure the setting in KODI is checked for 'use a fullscreen window'.
Make sure the setting in KODI is checked for 'Match refresh rates'.
Make sure the setting in KODI is unchecked for 'sync playback to display'.
Makes sure the setting in KODI is unchecked for 'minimize black bars'.
Make sure the setting in KODI is checked for 'allow hardware acceleration for DXVA2'.
Make sure the setting in KODI is set to 2160p resolution and that in Nvidia control panel resolution it is also set to 2160p 60Hz.
Use NVidia driver 385.69 clean installed meaning prior to installing, existing driver is a generic MS that installed during reboot after uninstalling the driver and software and tuned Windows not to auto download drivers or apps explained in detail to you earlier.
Player settings/Discs:
Bluray playback mode is 'Show simplified menu'.
In MPC-BE, 'Play tab at top', select 'after playback'. Select 'do nothing' for the 'once' area. Then 'Exit' in the 'every time' area.
Under options/video/fullscreen, check Launch files in fullscreen. Under 'fullscreen monitor' select 'current'. Uncheck 'use autochange fullscreen'.
Under options External filters. Select LAV audio decoder, splitter, splitter source and video decoder. Set them to 'Prefer'. Also select madVR and set to prefer. In the 'video' tab select madVR as the renderer.
Install LAV filters even though you think you don't need them. Use D3D11/automatic. Check all the resolutions and use 'ordered dithering'.
Use x64 LAV filters and MPC-BE latest nightlies provided your PC is x64. KODI official 17.6 x86.
In madVR 0.92.12:
Devices/display connected to your AVR expand to display modes. Check switch to matching display mode when player goes fullscreen. Check restore original display mode when player is closed. In 'list all display modes madvr may switch to: copy and paste this and don't change or add anything:
2160p23, 2160p24, 2160p25, 2160p59, 2160p60
In the rendering/general settings tab, check everything except delay playback... and enable windowed overlay....
Dithering tab is 'ordered'.
Use one of my playercorefactory.xml's and the .bat(s) if things still don't work using your own. I am certain following these directions explicitly will perform 100% of basic setup for you using your NVidia 1050Ti.
