2015-12-22, 10:58
2015-12-22, 11:15
(2015-12-22, 10:58)fritsch Wrote: It's fixed: https://github.com/FernetMenta/xbmc/comm...a22f8dab4e
Thanks to Fernet!
Yep, that's fixed it - many thanks to you both.
2015-12-22, 11:25
2015-12-22, 12:58
(2015-12-22, 11:55)fritsch Wrote: Uploading new build: Needs 40 minutes to go ... (DSL Lite ....)
hm.
i've installed kodi and kodi-bin with apt-get dist-upgrade but intall zip has the same behavior.
did i miss something?
log says the same then earlier.
kodi version:
KODI 17.0-ALPHA1 Git:d5ec039
compiled: Dec 22 2015
2015-12-22, 13:26
PPA is rebuild at night ... -> so for you: tomorrow. I only updated the OpenELEC builds.
2015-12-22, 13:37
2015-12-22, 19:30
@fernet
with the lastest builds hd audio bitstream sync is broken again, would you please take a look.
i will provide log later tonight if needed.
with the lastest builds hd audio bitstream sync is broken again, would you please take a look.
i will provide log later tonight if needed.
2015-12-22, 20:48
Fritsch,
I have a video that seems to have a refresh rate of 29.97 and I just get a bluescreen on my projector.
I tried older versions and the latest and same result so don't mind the debug log of an older version.
Debug log:
http://sprunge.us/EUGX
MediaInfo:
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=1, N=30
Codec ID : V_MPEG4/ISO/AVC
Duration : 2h 54mn
Bit rate mode : Variable
Maximum bit rate : 37.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Scan type, store method : Interleaved fields
Scan order : Top Field First
Language : English
Default : No
Forced : No
I can confirm this gives me a bluescreen:
/usr/lib/kodi/kodi-xrandr --screen 0 --output HDMI1 --mode 0xdf
kodi-xrandr --verbose: http://sprunge.us/bjVf
Seems it's getting resolutions my setup can't support? Also strange the video is 1920x1080 - why is it trying to use 1920x1200 which I assume my projector can't handle anyways
I have a video that seems to have a refresh rate of 29.97 and I just get a bluescreen on my projector.
I tried older versions and the latest and same result so don't mind the debug log of an older version.
Debug log:
http://sprunge.us/EUGX
MediaInfo:
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=1, N=30
Codec ID : V_MPEG4/ISO/AVC
Duration : 2h 54mn
Bit rate mode : Variable
Maximum bit rate : 37.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Scan type, store method : Interleaved fields
Scan order : Top Field First
Language : English
Default : No
Forced : No
I can confirm this gives me a bluescreen:
/usr/lib/kodi/kodi-xrandr --screen 0 --output HDMI1 --mode 0xdf
kodi-xrandr --verbose: http://sprunge.us/bjVf
Seems it's getting resolutions my setup can't support? Also strange the video is 1920x1080 - why is it trying to use 1920x1200 which I assume my projector can't handle anyways
2015-12-22, 21:01
Here is a debug log using the latest build from the 22nd where the audio is pretty off with passthrough. I believe the audio is ahead of the video in this case
debug: http://sprunge.us/cWPX
journal: http://sprunge.us/YJeK
dmesg: http://sprunge.us/EBFc
vainfo: http://sprunge.us/bKbF
debug: http://sprunge.us/cWPX
journal: http://sprunge.us/YJeK
dmesg: http://sprunge.us/EBFc
vainfo: http://sprunge.us/bKbF
2015-12-22, 21:17
Sorry for all the spamming of posts - finally had some time to play in the theater without anyone home.
Here is a debug log of a video that when i start the kodi screen just freezes up and the audio starts playing - no video ever shows up - i just see the last screen in kodi
If I turn off use VC-1 VAAPI we get farther but I end up with a bluescreen just like the above video.
debug: http://sprunge.us/fjcD
Video
ID : 1
Format : VC-1
Format profile : Advanced@L3
Codec ID : V_MS/VFW/FOURCC / WVC1
Codec ID/Hint : Microsoft
Duration : 2h 8mn
Bit rate : 28.9 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.465
Stream size : 26.0 GiB (86%)
Language : English
Default : No
Forced : No
Here is a debug log of a video that when i start the kodi screen just freezes up and the audio starts playing - no video ever shows up - i just see the last screen in kodi
If I turn off use VC-1 VAAPI we get farther but I end up with a bluescreen just like the above video.
debug: http://sprunge.us/fjcD
Video
ID : 1
Format : VC-1
Format profile : Advanced@L3
Codec ID : V_MS/VFW/FOURCC / WVC1
Codec ID/Hint : Microsoft
Duration : 2h 8mn
Bit rate : 28.9 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.465
Stream size : 26.0 GiB (86%)
Language : English
Default : No
Forced : No
2015-12-22, 22:41
(2015-12-22, 21:17)jjslegacy Wrote: Sorry for all the spamming of posts - finally had some time to play in the theater without anyone home.Your projector announces a Mode it does not support. Turn off adjust refreshrate and retry.
Here is a debug log of a video that when i start the kodi screen just freezes up and the audio starts playing - no video ever shows up - i just see the last screen in kodi
If I turn off use VC-1 VAAPI we get farther but I end up with a bluescreen just like the above video.
debug: http://sprunge.us/fjcD
Video
ID : 1
Format : VC-1
Format profile : Advanced@L3
Codec ID : V_MS/VFW/FOURCC / WVC1
Codec ID/Hint : Microsoft
Duration : 2h 8mn
Bit rate : 28.9 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 (30000/1001) fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.465
Stream size : 26.0 GiB (86%)
Language : English
Default : No
Forced : No
2015-12-22, 23:00
I did test that briefly and it seemed to work but the video was choppy as I leave my kodi refresh rate at 23.97 because of the random issues I have switching resolution rates. I suppose this needs to be played at 60hz.
Seems like it's picking the first one that tmatces the refresh rate vs matching the resolution or maybe I am completely wrong
What I don't understand is why would that video choose 1920x1200 - any way for me to cleanup what the projector is supplying? Do I need to lock in an xorg or some other option?
Seems like it's picking the first one that tmatces the refresh rate vs matching the resolution or maybe I am completely wrong
What I don't understand is why would that video choose 1920x1200 - any way for me to cleanup what the projector is supplying? Do I need to lock in an xorg or some other option?
2015-12-22, 23:17
(2015-12-22, 23:00)jjslegacy Wrote: I did test that briefly and it seemed to work but the video was choppy as I leave my kodi refresh rate at 23.97 because of the random issues I have switching resolution rates. I suppose this needs to be played at 60hz.
Seems like it's picking the first one that tmatces the refresh rate vs matching the resolution or maybe I am completely wrong
What I don't understand is why would that video choose 1920x1200 - any way for me to cleanup what the projector is supplying? Do I need to lock in an xorg or some other option?
Yes - you cannot play 29.97i at 23hz. Sorry - I cannot support all the crappy hardware out there ... ask the vendor of the projector, why they announce 59.94 hz when they cannot do it.
Quote:14:15:47 T:139884185327552 INFO: Output 'HDMI1' has 42 modes
14:15:47 T:139884185327552 INFO: ID:0x48 Name:1920x1080 Refresh:60.000000 Width:1920 Height:1080
14:15:47 T:139884185327552 INFO: Pixel Ratio: 0.994500
14:15:47 T:139884185327552 INFO: ID:0xe0 Name:1920x1080 Refresh:50.000000 Width:1920 Height:1080
14:15:47 T:139884185327552 INFO: Pixel Ratio: 0.994500
14:15:47 T:139884185327552 INFO: ID:0xe1 Name:1920x1080 Refresh:59.940201 Width:1920 Height:1080
14:15:47 T:139884185327552 INFO: Pixel Ratio: 0.994500
14:15:47 T:139884185327552 INFO: ID:0xe4 Name:1920x1080 Refresh:24.000000 Width:1920 Height:1080
14:15:47 T:139884185327552 INFO: Pixel Ratio: 0.994500
14:15:47 T:139884185327552 INFO: ID:0xe6 Name:1920x1080 Refresh:23.976080 Width:1920 Height:1080
14:15:47 T:139884185327552 INFO: Pixel Ratio: 0.994500
14:15:47 T:139884185327552 INFO: ID:0xdf Name:1920x1200 Refresh:59.950169 Width:1920 Height:1200
See the 59.95 mode ...