[egandt]

I'm having a problem with 7.10 and EDID detection. Happens with both the September and Oct builds (that I've tested).

LibreELEC (WRXTASY) Version: 7.1.0
kodi:~ # cat /sys/devices/virtual/amhdmitx/amhdmitx0/disp_cap
480i60hz
480p60hz
576i50hz
576p50hz
720p60hz
1080i60hz
1080p60hz*
720p50hz
1080i50hz
1080p50hz
1080p24hz


However this is actually a monitor so it supports: 1080p23hz, 1080p24hz, and 1080p30hz from a video card, however for some reason LibreELEC is only finding 1080p24, 50 and 60. I've got through a total of 7 sets of EDID's using a Genfen EDID recorder, to set them to different TV and even a receiver. In fact it only ever finds 24, 50 and 60 for all resolutions (720 and 480 as well).

No matter what I set the value of the EDID to, (using a HD Fury Linker I can even create my own custom EDID's) no refresh rate of 23, 24, 25, 29, or 30 is ever present in the list. This means most sources are not clean as they are attempting to use either 50 or 60hz, and not matching a desired refresh rate.

Also due to cable lengths (50 ft) I do not want to use 50 or 60, so I'd like to set a custom list:
1080p23hz
1080p24hz
1080p25hz
1080p30hz

As this would handle 99% of all media safely


Also please note I'm sure that modes 23, 24,25, 29 and 30 all are present and are valid, on the device it is simply that they are not being properly detected or presented by libreELEC.

Thanks,
ERIC