2017-09-21, 08:07
Something wrong with your changelog? Looks incomplete since 2 builds.
(2017-09-21, 08:07)Memphiz Wrote: Something wrong with your changelog? Looks incomplete since 2 builds.
hdmi_force_edid_3d=1
hdmi_clock_change_limit=20
#device_tree_overlay=lirc-rpi,gpio_in_pin=26
config_hdmi_boost=4
dtoverlay=gpio-ir,gpio_in_pin=26
dtoverlay=hifiberry-dacplus
device_tree_overlay=hifiberry-dacplus
LibreELEC:~ # ls -la /dev/lirc*
crw------- 1 root root 245, 0 Sep 14 16:12 /dev/lirc0
dtoverlay=gpio-ir,gpio_pin=26
(2017-09-21, 11:47)HiassofT Wrote: The syntax of gpio pin setting in the gpio-ir overlay is different to lirc-rpi. You have to use
Code:dtoverlay=gpio-ir,gpio_pin=26
Note "gpio_pin", not "gpio_in_pin"
Edit: also remove the "device_tree_overlay" lines in config.txt.
so long,
Hias
dtoverlay=gpio-ir,gpio_pin=26
dtoverlay=hifiberry-dacplus
LibreELEC:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event0) with:
Driver gpio-rc-recv, table rc-rc6-mce
Supported protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp
Enabled protocols: lirc
Name: gpio_ir_recv
bus: 25, vendor/product: 0001:0001, version: 0x0100
Repeat delay = 500 ms, repeat period = 125 ms
LibreELEC:~ # ps -a | grep lirc
242 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lircd
460 root 0:00 lircd --device=/dev/lirc0 /storage/.config/lircd.conf
466 root 0:00 {kodi.sh} /bin/sh /usr/lib/kodi/kodi.sh --standalone -fs --lircdev /run/lirc/lircd
470 root 0:52 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd
1455 root 0:00 grep lirc
LibreELEC:~ # ps -a | grep lirc
225 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lircd
455 root 0:00 {kodi.sh} /bin/sh /usr/lib/kodi/kodi.sh --standalone -fs --lircdev /run/lirc/lircd
462 root 0:34 /usr/lib/kodi/kodi.bin --standalone -fs --lircdev /run/lirc/lircd
890 root 0:00 grep lirc
LibreELEC:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event0) with:
Driver gpio-rc-recv, table rc-rc6-mce
Supported protocols: lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp
Enabled protocols: lirc nec rc-6
Name: gpio_ir_recv
bus: 25, vendor/product: 0001:0001, version: 0x0100
Repeat delay = 500 ms, repeat period = 125 ms
Enabled protocols: lirc
(2017-09-21, 12:38)HiassofT Wrote: OK, ir-keytable output looks good and getting activity from mode2 is fine as well.
You could now try enabling lirc in LE setting, that'll pick up your lircd.conf file. If you do that you may also need to disable ir-keytable auto-configuration (via ": > /storage/.config/rc_maps.cfg").
Which remote are you using? If it's some standard remote it might work with the ir-keytable maps shipped with LE and you just need to setup an rc_maps.cfg file.
Detailed info about remote handling is in the LE wiki: https://wiki.libreelec.tv/infrared_remotes
so long,
Hias
(2017-09-21, 08:10)Milhouse Wrote:(2017-09-21, 08:07)Memphiz Wrote: Something wrong with your changelog? Looks incomplete since 2 builds.
I hope not, what do you think is missing?
(2017-09-21, 20:51)Memphiz Wrote: It stops after like 10 points - but only when using tap atalk...
# uname -a
Linux rpi512 4.13.2 #1 Thu Sep 21 21:04:25 BST 2017 armv6l GNU/Linux
# vcgencmd version
Sep 12 2017 15:25:20
Copyright (c) 2012 Broadcom
version 3fbb171d1950eb3789eb8e37ba11e01079a37239 (clean) (release)
# lsb_release
LibreELEC (Milhouse): devel-20170921210317-#0921-g5a1b34f [Build #0921]
# Kodi version
(18.0-ALPHA1 Git:f3f144a). Platform: Linux ARM 32-bit
(2017-09-22, 03:00)pyrodex Wrote: Any idea in bursts of sound after pausing? Look at the attached video for example. Started recently like a week or two.
https://youtu.be/hEeSyv18Rdk
Debugging log
http://sprunge.us/XSeJ
(2017-09-22, 04:04)Milhouse Wrote: I've noticed something similar when "unpausing" a video, but in my case (RPi3 into computer monitor with 2.0 channel audio) after unpausing a video I sometimes hear a brief burst of white noise (or "click"), and then all audio is lost until playback is ended. It can also happen when starting playback. Seems to affect most videos - h264, hevc - with 2.0 or 5.1 audio but I couldn't trigger it on a VC-1 video with TrueHD audio.
I believe it started with #0910.
It only happens with MMAL - doesn't happen with OMX.
And it only happens when "Output configuration" is "Optimized" or "Best match" - if I set this to "Fixed" then there is no issue.
(2017-09-22, 07:00)Lindar Wrote:I also noticed this issue recently and was trying to track down a repeatable cause (with debug log) before reporting it. "Clicks" seem to occur after pausing/re-starting a local network video stream.(2017-09-22, 04:04)Milhouse Wrote: I've noticed something similar when "unpausing" a video, but in my case (RPi3 into computer monitor with 2.0 channel audio) after unpausing a video I sometimes hear a brief burst of white noise (or "click"), and then all audio is lost until playback is ended. It can also happen when starting playback. Seems to affect most videos - h264, hevc - with 2.0 or 5.1 audio but I couldn't trigger it on a VC-1 video with TrueHD audio.
I believe it started with #0910.
It only happens with MMAL - doesn't happen with OMX.
And it only happens when "Output configuration" is "Optimized" or "Best match" - if I set this to "Fixed" then there is no issue.
I do have the exakt same problem. RPi2 with 2.0 stereo. But no burst after unpausing, only silence. Rapid pause/unpause sometimes produces a "click" but audio only works again after stop and play again.
Lindar