[gnaag]

It's RPi3. No overclocking. Between #0120 and #0208 the device encountered random freezes (after cca 15 minutes of playback). #0206 didn't freeze for me. #0207 freezes everytime during (or just after) the boot.

cmdline.txt

cpp:
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet 

config.txt

cpp:
################################################################################

#      This file is part of LibreELEC - http://www.libreelec.tv

#      Copyright © 2016 Team LibreELEC

#

#  LibreELEC is free software: you can redistribute it and/or modify

#  it under the terms of the GNU General Public License as published by

#  the Free Software Foundation, either version 2 of the License, or

#  (at your option) any later version.

#

#  LibreELEC is distributed in the hope that it will be useful,

#  but WITHOUT ANY WARRANTY; without even the implied warranty of

#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

#  GNU General Public License for more details.

#

#  You should have received a copy of the GNU General Public License

#  along with LibreELEC.  If not, see <http://www.gnu.org/licenses/>.

################################################################################

# Bootloader configuration - config.txt

################################################################################



################################################################################

# Memory (System/GPU configuration )

################################################################################



# Default GPU memory split (do not change if you do not know what you are doing)

  gpu_mem=128



# Configure GPU memory based on SDRAM size - overrides above setting

  gpu_mem_256=112

  gpu_mem_512=160

  gpu_mem_1024=256



################################################################################

# For overclocking and various other settings, see:

# https://www.raspberrypi.org/documentatio...fig-txt.md

################################################################################

# Set 'force_turbo=1' to disable dynamic overclocking and enable overclocking always.

force_turbo=0



# Make display smaller to stop text spilling off the screen

#

# Note that the overscan settings only affect the splash screen and not Kodi.

#

# If you experience overscan/underscan issues the best solution is to adjust

# your TV settings ("full pixel", "1-1 pixel" etc.). Alternatively, there is a

# calibration menu in the Kodi GUI.

# disable_overscan=1



# Force HDMI even if unplugged or powered off

hdmi_force_hotplug=1

hdmi_drive=2



# Doesn't sent initial active source message.

# Avoids bringing CEC (enabled TV) out of standby and channel switch when

# rebooting.

hdmi_ignore_cec_init=1



################################################################################

# License keys to enable GPU hardware decoding for various codecs

# to obtain keys visit the shop at http://www.raspberrypi.com

################################################################################



decode_MPG2=0x00000000

# decode_WVC1=0x00000000



################################################################################

# End of default configuration

################################################################################



################################################################################

# Include distribution specific config file if it exists.

################################################################################

[all]

include distroconfig.txt