•   
  • 1
  • 307
  • 308
  • 309(current)
  • 310
  • 311
  • 344
  •   
v18 -  LibreELEC Testbuilds for RaspberryPi (Kodi 18.0)
(2018-03-05, 20:17)popcornmix Wrote: @da-anda what format are the SD and HD channels? Are SD MPEG-2 and software decoded and HD H.264 and HW decoded? Or are they all the same?
good catch. Yes, SD is MPEG2 and HD is h264. On my PI2 I had the mpeg2 license, so that's probably the reason why I only noticed it lately (-> after I moved to a PI3) and falsely had a change in Kodi under suspicion. Sorry for the noise then, or do you think you can do anything about it?
Reply
(2018-03-05, 21:34)da-anda Wrote:
(2018-03-05, 20:17)popcornmix Wrote: @da-anda what format are the SD and HD channels? Are SD MPEG-2 and software decoded and HD H.264 and HW decoded? Or are they all the same?
good catch. Yes, SD is MPEG2 and HD is h264. On my PI2 I had the mpeg2 license, so that's probably the reason why I only noticed it lately (-> after I moved to a PI3) and falsely had a change in Kodi under suspicion. Sorry for the noise then, or do you think you can do anything about it? 

If this is software decode then it's not really under my control. I thought fernet said the behaviour was as expected.
An MPEG-2 licence key may mask the issue.
Reply
(2018-03-05, 22:22)popcornmix Wrote: If this is software decode then it's not really under my control. I thought fernet said the behaviour was as expected.
An MPEG-2 licence key may mask the issue.
It doesn't occur on Windows with SW rendering, if that matters. Will do more testing on the PI
Reply
New LibreELEC.tv Leia build #0305: RPi / RPi2
(Supercedes previous build)

SHA256 Checksum: 7bd9056dd12856a6367da729d44106a7845570169d31bf896df6d815061108e0 (RPi)
SHA256 Checksum: bfde041b8ba3cab2d83b2f611efa6e10c2bf591890713e900590832bee07bc2d (RPi2)

# uname -a
Linux rpi512 4.14.24 #1 Mon Mar 5 21:56:34 GMT 2018 armv6l GNU/Linux

# vcgencmd version
Mar 5 2018 16:50:44
Copyright © 2012 Broadcom
version 15dd194e6c00bd5c24fc4b3b45a1c2af9bb02d7b (clean) (release)

# lsb_release
LibreELEC (Milhouse): devel-20180305215440-#0305-g5e4f86a [Build #0305]

# Kodi version
(18.0-ALPHA1 Git:89a53e4). Platform: Linux ARM 32-bit

Based on tip of LibreELEC.tv master (5e4f86a, changelog) and tip of XBMC master (2539a87, changelog) with the following modifications: Build Highlights:
  1. New firmware
  2. New 4.14.24 kernel

Build Details:
  1. Firmware (Mar 5):
    • firmware: dtoverlay: Also allow fragment-<n> in overlays
    • firmware: i2c_gpio: Optimise and run clients faster
  2. LibreELEC.tv:
    • kodi: Early March 2018 update (Kodi 18.0a1-Leia) (PR:2528, 5 commits, 9 files changed)
    • Add Rockchip project (PR:2334, 35 commits, 73 files changed)
    • mkimage: tweak uboot wording to match other messages (PR:2543, 1 commit, 1 file changed)
    • Fix wrong Strip with 64/32 in linux driver addons (PR:2555, 1 commit, 1 file changed)
    • linux-driver-addons: fix flush_timer for meson-ir and consolidate patch (PR:2494, 1 commit, 2 files changed)
    • ffmpegx: reorder dependencies (PR:2554, 1 commit, 1 file changed)
  3. XBMC:
    • [Settings] Allow s/w decode for GBM platform (PR:13578, 1 commit, 7 files changed)
    • [pydocs] Missing parenthesis in onNotification method (PR:13614, 1 commit, 1 file changed)
    • VideoPlayer: fix frame blendig, broke with OpenGL 3.2 (PR:13617, 1 commit, 1 file changed)
    • VideoPlayer: fix crash in ffmpeg postproc (PR:13618, 1 commit, 1 file changed)
    • VideoPlayer: OpenGL - fix HDR metadata MaxCLL (PR:13616, 2 commits, 2 files changed)
  4. kernel 4.14.y:
    • New commits in this build:
      • sound: bcm: Fix memset dereference warning (fbbd9f36)
      • staging: vchiq_arm: Remove unused variable (76799523)
      • net: rtl8192cu: Normalize indentation (dcfc8a90)
      • net: rtl8192cu: Fix implicit fallthrough warnings (fe7394e1)
      • usb: dwb_otg: Fix unreachable switch statement warning (44699674)
      • Merge remote-tracking branch 'stable/linux-4.14.y' into rpi-4.14.y (80a14a56)
  5. Additional commits/pull requests/changes not yet merged upstream:
    • Updated: [env] PR:2520 (perma): linux: update to linux-4.14.24 (ish)
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Reply
@popcornmix found the cause. The still frame issue only happens with the two "mmal advanced" deinterlacers and not with the "mmal bob" ones or with deinterlacing disabled. So it's not a generic Kodi sw rendereing issue but somehow related to these two deinterlacers. As already mentioned, it's not a show stopper issue and probably not worth further investigation, but if you are bored/curious and want me to test a possible fix, let me know.
Reply
(2018-03-05, 18:48)agb2 Wrote:
(2018-03-05, 18:03)J_E_F_F Wrote:
Code:
was watching a hevc video, when it ended, Kodi crashed and rebooted
http://ix.io/SUw
 I've seen the same crash on the last few builds. Various media types. Doesn't happen every time.
From your crashlog
Always in the same place in libstc++ - std:Confusedtring:Confusedwap.
Quote:Thread 1 (Thread 0x35dd7380 (LWP 900)):#0 0x74fe6e14 in std:Confusedtring:Confusedwap(std:Confusedtring&) () from /usr/lib/libstdc++.so.6
#1 0x0077d7dc in ?? ()
#2 0x0077ddd4 in CVideoDatabase::GetEpisodeInfo(std:Confusedtring const&, CVideoInfoTag&, int, int) ()
#3 0x00781e1c in CVideoDatabase::LoadVideoInfo(std:Confusedtring const&, CVideoInfoTag&, int) ()
Anyone else seeing this?
Something is munging double colons...  
This doesn't appear to be happening on #304...
Reply
(2018-03-06, 01:32)agb2 Wrote: This doesn't appear to be happening on #304...

Based on testing in the Generic LE9 thread, the crash at end of playback starts with #0301, and there's no such problem with #0228.

The only potential candidate in #0301 is PR13533 which touches the application message loop and may now be causing unwanted side effects when ending videos (the PR relates to ratings, specifically music ratings - are users with problems using Trakt or ratings?)

I've uploaded a couple of debug-enabled RPi2 builds to gather more information:

#0305x: RPi2 (debug-enabled equivalent of #0305)
#0305y: RPi2 (same as #0305x but with PR13533 reverted)

Can those experiencing crashes (of any kind) test with #0305x and upload the crashlog.

Users experiencing crashes at the end of playback please also test build #0305y and confirm if the crashes continue - if so, please upload the new crashlog. Thanks.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Reply
#305y crashlog http://ix.io/TlU

I tried #305x but it would not install on my system due to partition size.
Reply
Hi,
Since few weeks librespot stopped working. All I got when trying to start is:

# RUST_BACKTRACE=1 librespot -n 1 -v
INFO:librespot: librespot 89426f1 (2018-02-06). Built on 2018-02-08. Build ID: R0L3nS0l
DEBUG:librespot: Volume "32768" !
*** WARNING *** The program 'librespot' uses the Apple Bonjour compatibility layer of Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/blog/projects/avahi-compat.html>
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: DNSError(Unknown)', /checkout/src/libcore/result.rs:906:4
stack backtrace:
   0: <unknown>
   1: <unknown>
   2: <unknown>
   3: <unknown>
   4: <unknown>
   5: <unknown>
   6: <unknown>
   7: <unknown>
   8: <unknown>
   9: <unknown>
  10: <unknown>
  11: <unknown>
  12: <unknown>
  13: <unknown>
  14: __libc_start_main
             at /home/neil/projects/LibreELEC.tv/build.LibreELEC-RPi2.arm-9.0-devel/glibc-2.27/csu/libc-start.c:308


It was surely working as of late December, then I didn't use Spotify for quite a while, and when I tried around half of February it didn't work. I have since installed test builds almost daily (currently running the March 4th one), but there's no change - it always throws the same error.

Also, in log I can find lots of:
Mar 06 18:48:04 LibreELEC pulseaudio[261]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Mar 06 18:47:54 LibreELEC pulseaudio[261]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Mar 06 18:47:44 LibreELEC pulseaudio[261]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused
Mar 06 18:47:34 LibreELEC pulseaudio[261]: W: [pulseaudio] sap.c: sendmsg() failed: Connection refused


But I'm not sure if it's related.

I'm running this on Raspberry Pi 3, here's the kernel:
Linux LibreELEC 4.14.22 #1 SMP Sun Mar 4 21:06:01 GMT 2018 armv7l GNU/Linux

Kodi itself works perfectly fine.
Reply
(2018-03-06, 19:39)J_E_F_F Wrote: #305y crashlog http://ix.io/TlU

I tried #305x but it would not install on my system due to partition size.

The crashlog is not from #0305y - it's from #0305. Did you upload the wrong crashlog, or did the upgrade to #0305y also not work as expected?

What size is your partition, 256MB? Instructions for increasing partition size are in the first post, note #5.
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Reply
@stasheck 
Your release of librespot is outdated.
Use the current revision (110) of the Librespot addon.
Reply
@Milhouse 

Ah, yes, didn't catch that, y fails to install too, based on too small of a fat partition. I don't have anything setup to increase that at the moment without a full wipe, something I'll look into.
Reply
(2018-03-06, 21:14)awiouy Wrote: @stasheck 
Your release of librespot is outdated.
Use the current revision (110) of the Librespot addon.
That'd explain it, but if it's available in repos, then I'm doing something wrong:
Kodi -> Addons -> My addons -> Addon repositories -> (context) Search for updates [done] -> back -> Services -> Librespot -> Update ===> I can only see 9.0.109.

What did I miss?
Reply
repartitioned, and with #305x, kodi crashes, and then the whole rp3 crashes soon afterward requiring a power cycle to reboot, no new kodi_crash is created, but here is a kodi_log... I tried it 2x, same result. 
http://ix.io/Trm

There was no crash with #305y, I am not using Trakt or ratings that I know of. Some shows do show ratings, I didn't put them there. My systems are pretty much bone stock, no add-ons that I know of.
Reply
I don't know why you wouldn't get a crashlog, but good to know that #0305y isn't crashing - thanks. Can you confirm if you use ratings at all (eg. Trakt)?
Texture Cache Maintenance Utility: Preload your texture cache for optimal UI performance. Remotely manage media libraries. Purge unused artwork to free up space. Find missing media. Configurable QA check to highlight metadata issues. Aid in diagnosis of library and cache related problems.
Reply
  •   
  • 1
  • 307
  • 308
  • 309(current)
  • 310
  • 311
  • 344
  •   
 
Thread Rating:
  • 15 Vote(s) - 4.6 Average



Logout Mark Read Team Forum Stats Members Help
LibreELEC Testbuilds for RaspberryPi (Kodi 18.0)4.615